- 15 1月, 2009 6 次提交
-
-
由 Ingo Molnar 提交于
-
由 Ingo Molnar 提交于
Impact: cleanup Use the proper type. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
E.g. when called due to an early panic. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
Impact: widen the effect of the 'nolapic' boot parameter "nolapic" should not only suppress SMP and use of the LAPIC, but it also ought to have the effect of disabling all IO-APIC related activity as well as PCI MSI and HT-IRQs. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Travis 提交于
Impact: fix build errors Since the SPARSE IRQS changes redefined how the kstat irqs are organized, arch's must use the new accessor function: kstat_incr_irqs_this_cpu(irq, DESC); If CONFIG_SPARSE_IRQS is set, then DESC is a pointer to the irq_desc which has a pointer to the kstat_irqs. If not, then the .irqs field of struct kernel_stat is used instead. Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
Thierry Vignaud reported: > http://bugzilla.kernel.org/show_bug.cgi?id=12372 > > On P4 with an SiS motherboard (video card is a SiS 651) > X server fails to start with error: > xf86MapVidMem: Could not mmap framebuffer (0x00000000,0x2000) (Invalid > argument) Here X is trying to map first 8KB of memory using /dev/mem. Existing code treats first 0-4KB of memory as non-RAM and 4KB-8KB as RAM. Recent code changes don't allow to map memory with different attributes at the same time. Fix this by treating the first 1MB legacy region as special and always track the attribute requests with in this region using linear linked list (and don't bother if the range is RAM or non-RAM or mixed) Reported-and-tested-by: NThierry Vignaud <tvignaud@mandriva.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 1月, 2009 21 次提交
-
-
由 Yinghai Lu 提交于
Impact: clean up to be same as 64bit 32-bit is using per-cpu vector too, so don't use default NR_IRQS. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Merge branch 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/travis/linux-2.6-cpus4096-for-ingo into cpus4096
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup, solve 80 columns wrap problems Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup, solve 80 columns wrap problems Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
This commit broke flush_tlb_others_ipi() causing boot hangs on a 16 logical cpu system: > commit 4595f962 > Author: Rusty Russell <rusty@rustcorp.com.au> > Date: Sat Jan 10 21:58:09 2009 -0800 > > x86: change flush_tlb_others to take a const struct cpumask This change resulted in sending the invalidate tlb vector to the sender itself causing the hang. flush_tlb_others_ipi() should exclude the sender itself from the destination list. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 PAT: remove CPA WARN_ON for zero pte x86 PAT: return compatible mapping to remap_pfn_range callers x86 PAT: change track_pfn_vma_new to take pgprot_t pointer param x86 PAT: consolidate old memtype new memtype check into a function x86 PAT: remove PFNMAP type on track_pfn_vma_new() error
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: TWL4030: fix clk API usage [ARM] 5364/1: allow flush_ioremap_region() to be used from modules [ARM] w90x900: fix build errors and warnings [ARM] i.MX add missing include [ARM] i.MX: fix breakage from commit 27889273 [ARM] i.MX: remove LCDC controller register definitions from imx-regs.h
-
由 Bernd Schmidt 提交于
Since we (Analog Devices) updated our Blackfin kernel to 2.6.28, we've seen occasional 5-second hangs from telnet. telnetd calls select with a NULL timeout, but with the new kernel, the system call occasionally returns 0, which causes telnet to call sleep (5). This did not happen with earlier kernels. The code in sys_pselect7 looks a bit strange, in particular the variable "to" is initialized to NULL, then changed if a non-null timeout was passed in, but not used further. It needs to be passed to core_sys_select instead of &end_time. This bug was introduced by 8ff3e8e8 ("select: switch select() and poll() over to hrtimers"). Signed-off-by: NBernd Schmidt <bernd.schmidt@analog.com> Reviewed-by: NUlrich Drepper <drepper@redhat.com> Tested-by: NRobin Getz <rgetz@blackfin.uclinux.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Helge Deller 提交于
Commit b430428a ("8250: Don't clobber spinlocks.") introduced a regression on the parisc architecture, which broke the handover to the serial port at boottime. early_serial_setup() was changed to only copy a subset of the uart_port fields, and sadly the "type" and "line" fields were forgotten and thus the serial port was not initialized and could not be used for a handover. This patch fixes this by copying the missing fields. As this change to early_serial_setup() doesn't need an initialized spinlock in the uart_port struct any longer, we can drop the spinlock initialization in the superio driver. Cc: David Daney <ddaney@caviumnetworks.com> Cc: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Cc: linux-parisc@vger.kernel.org Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
Always pass a struct device if one is available; and there's really no reason for the processor specific stuff in this file if only people would follow the API usage properly by using the struct device. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
Impact: reduce scope of debug check - avoid warnings The logic to find whether identity map exists or not using high_memory or max_low_pfn_mapped/max_pfn_mapped are not complete as the memory withing the range may not be mapped if there is a unusable hole in e820. Specifically, on my test system I started seeing these warnings with tools like hwinfo, acpidump trying to map ACPI region. [ 27.400018] ------------[ cut here ]------------ [ 27.400344] WARNING: at /home/venkip/src/linus/linux-2.6/arch/x86/mm/pageattr.c:560 __change_page_attr_set_clr+0xf3/0x8b8() [ 27.400821] Hardware name: X7DB8 [ 27.401070] CPA: called for zero pte. vaddr = ffff8800cff6a000 cpa->vaddr = ffff8800cff6a000 [ 27.401569] Modules linked in: [ 27.401882] Pid: 4913, comm: dmidecode Not tainted 2.6.28-05716-gfe0bdec6 #586 [ 27.402141] Call Trace: [ 27.402488] [<ffffffff80237c21>] warn_slowpath+0xd3/0x10f [ 27.402749] [<ffffffff80274ade>] ? find_get_page+0xb3/0xc9 [ 27.403028] [<ffffffff80274a2b>] ? find_get_page+0x0/0xc9 [ 27.403333] [<ffffffff80226425>] __change_page_attr_set_clr+0xf3/0x8b8 [ 27.403628] [<ffffffff8028ec99>] ? __purge_vmap_area_lazy+0x192/0x1a1 [ 27.403883] [<ffffffff8028eb52>] ? __purge_vmap_area_lazy+0x4b/0x1a1 [ 27.404172] [<ffffffff80290268>] ? vm_unmap_aliases+0x1ab/0x1bb [ 27.404512] [<ffffffff80290105>] ? vm_unmap_aliases+0x48/0x1bb [ 27.404766] [<ffffffff80226d28>] change_page_attr_set_clr+0x13e/0x2e6 [ 27.405026] [<ffffffff80698fa7>] ? _spin_unlock+0x26/0x2a [ 27.405292] [<ffffffff80227e6a>] ? reserve_memtype+0x19b/0x4e3 [ 27.405590] [<ffffffff80226ffd>] _set_memory_wb+0x22/0x24 [ 27.405844] [<ffffffff80225d28>] ioremap_change_attr+0x26/0x28 [ 27.406097] [<ffffffff80228355>] reserve_pfn_range+0x1a3/0x235 [ 27.406427] [<ffffffff80228430>] track_pfn_vma_new+0x49/0xb3 [ 27.406686] [<ffffffff80286c46>] remap_pfn_range+0x94/0x32c [ 27.406940] [<ffffffff8022878d>] ? phys_mem_access_prot_allowed+0xb5/0x1a8 [ 27.407209] [<ffffffff803e9bf4>] mmap_mem+0x75/0x9d [ 27.407523] [<ffffffff8028b3b4>] mmap_region+0x2cf/0x53e [ 27.407776] [<ffffffff8028b8cc>] do_mmap_pgoff+0x2a9/0x30d [ 27.408034] [<ffffffff8020f4a4>] sys_mmap+0x92/0xce [ 27.408339] [<ffffffff8020b65b>] system_call_fastpath+0x16/0x1b [ 27.408614] ---[ end trace 4b16ad70c09a602d ]--- [ 27.408871] dmidecode:4913 reserve_pfn_range ioremap_change_attr failed write-back for cff6a000-cff6b000 This is wih track_pfn_vma_new trying to keep identity map in sync. The address cff6a000 is the ACPI region according to e820. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable) [ 0.000000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff60000 (usable) [ 0.000000] BIOS-e820: 00000000cff60000 - 00000000cff69000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff69000 - 00000000cff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) And is not mapped as per init_memory_mapping. [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff60000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 We can add logic to check for this. But, there can also be other holes in identity map when we have 1GB of aligned reserved space in e820. This patch handles it by removing the WARN_ON and returning a specific error value (EFAULT) to indicate that the address does not have any identity mapping. The code that tries to keep identity map in sync can ignore this error, with other callers of cpa still getting error here. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
Impact: avoid warning message, potentially solve 3D performance regression Change x86 PAT code to return compatible memtype if the exact memtype that was requested in remap_pfn_rage and friends is not available due to some conflict. This is done by returning the compatible type in pgprot parameter of track_pfn_vma_new(), and the caller uses that memtype for page table. Note that track_pfn_vma_copy() which is basically called during fork gets the prot from existing page table and should not have any conflict. Hence we use strict memtype check there and do not allow compatible memtypes. This patch fixes the bug reported here: http://marc.info/?l=linux-kernel&m=123108883716357&w=2 Specifically the error message: X:5010 map pfn expected mapping type write-back for d0000000-d0101000, got write-combining Should go away. Reported-and-bisected-by: NKevin Winchester <kjwinchester@gmail.com> Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
Impact: cleanup Change the protection parameter for track_pfn_vma_new() into a pgprot_t pointer. Subsequent patch changes the x86 PAT handling to return a compatible memtype in pgprot_t, if what was requested cannot be allowed due to conflicts. No fuctionality change in this patch. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
Impact: cleanup Move the new memtype old memtype allowed check to header so that is can be shared by other users. Subsequent patch uses this in pat.c in remap_pfn_range() code path. No functionality change in this patch. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
Impact: fix (harmless) double-free of memtype entries and avoid warning On track_pfn_vma_new() failure, reset the vm_flags so that there will be no second cleanup happening when upper level routines call unmap_vmas(). This patch fixes part of the bug reported here: http://marc.info/?l=linux-kernel&m=123108883716357&w=2 Specifically the error message: X:5010 freeing invalid memtype d0000000-d0101000 Is due to multiple frees on error path, will not happen with the patch below. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Andi Kleen 提交于
Impact: reduce kernel image size Hugh Dickins noticed that older gcc versions when the kernel is built for code size didn't inline some of the bitops. Mark all complex x86 bitops that have more than a single asm statement or two as always inline to avoid this problem. Probably should be done for other architectures too. Ingo then found a better fix that only requires a single line change, but it unfortunately only works on gcc 4.3. On older gccs the original patch still makes a ~0.3% defconfig difference with CONFIG_OPTIMIZE_INLINING=y. With gcc 4.1 and a defconfig like build: 61169987 1138540 883788 8139326 7c323e vmlinux-oi-with-patch 6137043 1138540 883788 8159371 7c808b vmlinux-optimize-inlining ~20k / 0.3% difference. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: Revert "i386: add TRACE_IRQS_OFF for the nmi"
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: smp_call_function_single(): be slightly less stupid, fix #2 lockdep, mm: fix might_fault() annotation
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: Add dependency on INFINIBAND_ADDR_TRANS IPoIB: Do not join broadcast group if interface is brought down RDMA/nes: Fix for NIPQUAD removal IPoIB: Fix loss of connectivity after bonding failover on both sides IB/mlx4: Don't register IB device for adapters with no IB ports mlx4_core: Fix warning from min() IB/ehca: spin_lock_irqsave() takes an unsigned long
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_it821x: Update RDC UDMA handling ata: fix wrong WARN_ON_ONCE
-
由 Dirk Hohndel 提交于
With some broken BIOSs when VT-d is enabled, the data structures are filled incorrectly. This can cause a NULL pointer dereference in very early boot. Signed-off-by: NDirk Hohndel <hohndel@linux.intel.com> Acked-by: NYu Zhao <yu.zhao@intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 1月, 2009 13 次提交
-
-
由 Alan Cox 提交于
The UDMA affliction is apparently specific to revision 0x11. Keeps us in sync with drivers/ide current. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Christian Borntraeger 提交于
This patch fixes a wrong WARN_ON that was triggered by 32bit PIO support: WARNING: at drivers/ata/libata-sff.c:1017 ata_sff_hsm_move+0x45e/0x750() __atapi_pio_bytes simply doesnt know enough to decide if there is a bug. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ingo Molnar 提交于
Impact: fix potential boot crash on MAXSMP Remove code left over by: 50c668d6: Revert "cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read That cmd.cpumask is not allocated anymore. No impact on default !MAXSMP kernels. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Roland Dreier 提交于
-
由 Randy Dunlap 提交于
Fix ib_iser build to depend on INFINIBAND_ADDR_TRANS; if INET=y but IPV6=n, then the RDMA CM is not built but INFINIBAND_ISER can be enabled, leading to: ERROR: "rdma_destroy_id" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_connect" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_destroy_qp" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_create_id" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_create_qp" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_resolve_route" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_disconnect" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! ERROR: "rdma_resolve_addr" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
-
由 Yossi Etigin 提交于
Because the ipoib_workqueue is not flushed when ipoib interface is brought down, ipoib_mcast_join() may trigger a join to the broadcast group after priv->broadcast was set to NULL (during cleanup). This will cause the system to be a member of the broadcast group when interface is down. As a side effect, this breaks the optimization of setting the Q_key only when joining the broadcast group. Signed-off-by: NYossi Etigin <yosefe@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Yinghai Lu 提交于
Impact: save RAM with large NR_CPUS, get smaller nr_irqs Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NMike Travis <travis@sgi.com>
-
由 Arjan van de Ven 提交于
At 37000 feet somewhere near Greenland I woke up from a half-sleep with the realisation that __lowest_in_progress() is buggy. After landing I checked and there were indeed 2 problems with it; this patch fixes both: * The order of the list checks was wrong * The locking was not correct. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arjan van de Ven 提交于
There has been some light flamewar on lkml about decoding oopses in modules (as part of the crashdump flamewar). Now this isn't rocket science, just the markup_oops.pl script cheaped out and didn't handle modules. But really; a flamewar all about that?? What happened to C++ in the kernel or reading files from inside the kernel? This patch adds module support to markup_oops.pl; it's not the most pretty perl but it works for my testcases... Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Adams 提交于
Add the Multi-Tech cellular modem firmware to the TI USB serial driver. This firmware was extracted from: ftp://ftp.multitech.com/wireless/wireless_linux.zip Firmware licence: "all firmware components are redistributable in binary form" per support@multitech.com Copyright (C) 2005 Multi-Tech Systems, Inc. Signed-off-by: NChris Adams <cmadams@hiwaay.net> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Adams 提交于
Add Multi-Tech cellular modem support to the ti_usb_3410_5052 driver. Signed-off-by: NChris Adams <cmadams@hiwaay.net> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Adams 提交于
The TI USB serial driver supports specifying alternate vendor and product IDs (since the chips can and are used in devices under other vendor/product IDs). However, the alternate IDs were not loaded in the combined product table. This patch also adds support for loading alternate firmware for alternate vendor/product IDs. Signed-off-by: NChris Adams <cmadams@hiwaay.net> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Julia Lawell found a case where a NULL check was misplaced in the usb-serial code. However as the object in question cannot be NULL the check can simply be removed. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-