No users of this code anymore - so RIP !
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Now that we have same helper used for all icache invalidates (i.e.
vaddr+paddr based exact line invalidate), consolidate the open coded
calls into one place.

Also rename flush_icache_range_vaddr => __sync_icache_dcache
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This change continues the theme from prev commit - this time icache
handling for kernel's own code modification (vmalloc: loadable modules,
breakpoints for kprobes/kgdb...)

flush_icache_range() calls the CDU icache helper with vaddr to enable
exact line invalidate.

For a true kernel-virtual mapping, the vaddr is actually virtual hence
valid as index into cache. For kprobes breakpoint however, the vaddr arg
is actually paddr - since that's how normal kernel is mapped in ARC
memory map.  This implies that CDU will use the same addr for
indexing as for tag match - which is fine since kernel code would only
have that "implicit" mapping and none other.

This should speed up module loading significantly - specially on default
ARC700 icache configurations (32k) which alias.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

ARC icache doesn't snoop dcache thus executable pages need to be made
coherent before mapping into userspace in flush_icache_page().

However ARC700 CDU (hardware cache flush module) requires both vaddr
(index in cache) as well as paddr (tag match) to correctly identify a
line in the VIPT cache. A typical ARC700 SoC has aliasing icache, thus
the paddr only based flush_icache_page() API couldn't be implemented
efficiently. It had to loop thru all possible alias indexes and perform
the invalidate operation (ofcourse the cache op would only succeed at
the index(es) where tag matches - typically only 1, but the cost of
visiting all the cache-bins needs to paid nevertheless).

Turns out however that the vaddr (along with paddr) is available in
update_mmu_cache() hence better suits ARC icache flush semantics.
With both vaddr+paddr, exactly one flush operation per line is done.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

munmap ends up calling tlb_flush() which for ARC was flushing the entire
TLB unconditionally (by moving the MMU to a new ASID)

do_munmap
  unmap_region
    unmap_vmas
      unmap_single_vma
         unmap_page_range
            tlb_start_vma
            zap_pud_range
            tlb_end_vma()
  tlb_finish_mmu
    tlb_flush()  ---> unconditional flush_tlb_mm()

So even a single page munmap, a frequent operation when uClibc dynamic
linker (ldso) is loading the dependent shared libraries, would move the
the ASID multiple times - needlessly invalidating the pre-faulted TLB
entries (and increasing the rate of ASID wraparound + full TLB flush).

This is now optimised to only be called if tlb->full_mm (which means
for exit/execve) cases only. And for those cases, flush_tlb_mm() is
already optimised to be a no-op for mm->mm_users == 0.

So essentially there are no mmore full mm flushes - except for fork which
anyhow needs it for properly COW'ing parent address space.

munmap now needs to do TLB range flush, which is implemented with
tlb_end_vma()

Results
-------
1. ASID now consistenly moves by 4 during a simple ls (as opposed to 5 or
   7 before).

2. LMBench microbenchmark also shows improvements

Basic system parameters
------------------------------------------------------------------------------
Host                 OS Description              Mhz  tlb  cache  mem scal
                                                     pages line   par load
                                                           bytes
--------- ------------- ----------------------- ---- ----- ----- ------ ----
3.9-rc5-0 Linux 3.9.0-r 3.9-rc5-0404-gcc-4.4-ba   80     8    64 1.1000 1
3.9-rc5-0 Linux 3.9.0-r 3.9-rc5-0405-avoid-full   80     8    64 1.1200 1

Processor, Processes - times in microseconds - smaller is better
------------------------------------------------------------------------------
Host                 OS  Mhz null null      open slct sig  sig  fork exec sh
                             call  I/O stat clos TCP  inst hndl proc proc proc
--------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
3.9-rc5-0 Linux 3.9.0-r   80 4.81 8.69 68.6 118. 239. 8.53 31.6 4839 13.K 34.K
3.9-rc5-0 Linux 3.9.0-r   80 4.46 8.36 53.8 91.3 223. 8.12 24.2 4725 13.K 33.K

File & VM system latencies in microseconds - smaller is better
-------------------------------------------------------------------------------
Host                 OS   0K File      10K File     Mmap    Prot   Page 100fd
                        Create Delete Create Delete Latency Fault  Fault selct
--------- ------------- ------ ------ ------ ------ ------- ----- ------- -----
3.9-rc5-0 Linux 3.9.0-r  314.7  223.2 1054.9  390.2  3615.0 1.590 20.1 126.6
3.9-rc5-0 Linux 3.9.0-r  265.8  183.8 1014.2  314.1  3193.0 6.910 18.8 110.4
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This adds support for an ARC Virtual Platform. This platform is based on the
System C standard promoted by the OSCI (Open System C Initiative) and uses
nSIM to simulate the ARC CPU core itself.

Users can build a virtual SoC by combining System C models of peripherals
and CPU cores.
Signed-off-by: NMischa Jonker <mjonker@synopsys.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

The original device tree was written using a slightly different
implementation of the fixed-factor-clock device tree binding. The
compatible string must be modified in order to be compatible with the
new implementation.
Signed-off-by: NChristian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Infrastructure required to make the Linux kernel compile and boot on the
Abilis Systems TB10x series of SOCs based on ARC700 CPUs:
  - Kmake related files (Kconfig, Makefile, tb10x_defconfig)
  - TB10x platform initialisation
Signed-off-by: NChristian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: NPierrick Hascoet <pierrick.hascoet@abilis.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

These are the device tree files for the Abilis Systems TB100 and TB101 ICs and
their respective development kit PCBs. These files are committed in preparation
of the following patch set which adds support for these chips to the ARC
platform.
Signed-off-by: NChristian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: NPierrick Hascoet <pierrick.hascoet@abilis.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This patch adds some room for CPU-external interrupt controllers in the
Linux interrupt space. Until now, only the 32 CPU internal interrupt lines
were supported which does not allow for external interrupt controllers such
as GPIO modules etc.
Signed-off-by: NChristian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: NPierrick Hascoet <pierrick.hascoet@abilis.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

arc-intc is initialized in arc common code as it is applicable to all
platforms. However platforms with their own external intc still need to
refer to it for correct DT interrupt tree hierarchy setup,

e.g.
static struct of_device_id __initdata tb10x_irq_ids[] = {
	{ .compatible = "snps,arc700-intc", .data = dummy_init_irq },
	{ .compatible = "abilis,tb10x_ictl", .data = tb10x_init_irq },
	{},
};

The fix is to use the generic irqchip framework to tie all irqchips in
a special linker section and then call irqchip_init() which calls the
DT of_irq_init() for all the intc in one go.

That way the platform code need not be aware of arc-intc at all.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

The existing code was wrong on several counts:

* uboot provided bootargs were copied into @boot_command_line, only to
  be over-written by setup_machine_fdt(), effectively lost

* @cmdline_p returned by setup_arch() to start_kernel() didn't include
  the DT /bootargs
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Given that DeviceTree /bootargs can provide similar functionality,
no point in providing duplicate infrastructure.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

* Allow initramfs path to be symlink
* CONFIG_PREEMPT be default
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

The fixup code correctly updates the callee-regs on stack, but
fails to unwind it into actual register file. Thus userspace won't see
the update.
Reported-by: NNoam Camus <noamc@ezchip.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

If CONFIG_ARC_MISALIGN_ACCESS is not enabled, or if the fixup fails,
call the same error handler: same signal/si_code to user (SIGBUS)
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

* Remove the line-break between scratch/callee-regs (sneaked in when we
  converted from printk to pr_*

* Use %pS to print the symbol names of faulting PC (ret pseudo register)
  and BLINK (call return register)

* Don't print user-vma for a kernel crash (only do it for
  print-fatal-signals based regfile dump)

* Verbose print the Interrupt/Exception Enable/Active state

* for main executable link address is 0x10000 based (vs. 0) thus offset
  of faulting PC needs to be adjusted
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NNoam Camus <noamc@ezchip.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NNoam Camus <noamc@ezchip.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This tracks mainline commit ae903caa "Bury the conditionals from
kernel_thread/kernel_execve series" which we missed out as ARC port was
not yet mainline.

[vgupta: commit log modified]
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Currently, for every ARC kernel build I see the following:

--------------->8-----------------
  DTB    arch/arc/boot/dts/angel4.dtb.S
  AS      arch/arc/boot/dts/angel4.dtb.o
  LD      arch/arc/boot/dts/built-in.o
rm arch/arc/boot/dts/angel4.dtb.S        <-- forces rebuild next iter
  CHK     kernel/config_data.h
--------------->8-----------------

This is because *.dts.S is intermediate file in dtb generation and is by
default deleted by make which needs a ".SECONDARY" hint to NOT do so.

This could have ideally been done in scripts/Makefile.lib - for benefit
of all, however .SECONDARY doesn't seem to work with wildcards.

Thanks to Stephen for suggesting .SECONDARY (vs .PRECIOUS) and making
that work using a non wildcard version in arch makefile.

Thanks to James Hogan for pointing out that *.dtb.S now needs to be
added to clean-files
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

commit "fs: make binfmt support for #! scripts modular and removable"
made support for #!scripts optional - thus need to include the Kconfig
file to get all relevant BINFMT_*
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Currently ARC_HAS_LLSC can be influenced by platform for SMP only using
ARC_HAS_COH_LLSC. For !SMP it defaults to "y".

It turns out that some customers can't support it all, even in UP.
So we change the semantics, and use a negative dependency ARC_CANT_LLSC.
Any platform (independent of SMP or !SMP) can select it to disable LLSC.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

arch/arc/kernel/traps.c no longer compiles without explicitly including
asm/kprobes.h
Signed-off-by: NChristian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

The existing uImage target always generates gzip compressed image which
drags bootup for some very slow FPGA customer boards.

So introduce seperate make targets:uImage.{bin,gz} with uncompressed
being default. Also tie gz generation to CONFIG_KERNEL_GZIP, which a
platform can select in it's Kconfig if it wishes gz to be default.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

We do cross compiles for ARC Linux.
With gcc 4.7, a make defconfig spews out the following:

------------------->8--------------------------
make ARCH=arc defconfig
gcc: error: unrecognized command line option '-marc600'
gcc: error: unrecognized command line option '-mA7'
gcc: error: unrecognized command line option '-mno-sdata'
gcc: error: unrecognized command line option '-mno-mpy'
*** Default configuration is based on 'fpga_defconfig'
------------------->8--------------------------

This apparently is coming from LIBGCC line - which is strange to be
invoked for defconfig generation.
Reported-by: NAlexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

There's no (Kconfig) macro CONFIG_BLOCK_DEV_RAM. (CONFIG_BLK_DEV_RAM
does exist though.) But linux/blk.h got killed in 2005 anyway (in a
patch titled "kill blk.h"), so these three lines can be removed.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Some header files were included twice in the same file.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Fixes the following coding style issues as detected by checkpatch:
ERROR: space required before the open parenthesis '('
ERROR: "foo * bar" should be "foo *bar"
WARNING: space prohibited between function name and open parenthesis '('
WARNING: please, no spaces at the start of a line
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Silences the following checkpatch warnings:
WARNING: Use #include <linux/ptrace.h> instead of <asm/ptrace.h>
WARNING: Use #include <linux/kprobes.h> instead of <asm/kprobes.h>
WARNING: Use #include <linux/kgdb.h> instead of <asm/kgdb.h>
WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
WARNING: Use #include <linux/cache.h> instead of <asm/cache.h>
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

version.h header file inclusion is not necessary as detected by
versioncheck script.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Pull powerpc bugfix from Stephen Rothwell:
 "A single BUG_ON fix for a condition that could happen for machines
  with certain hardware installed."

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes:
  powerpc: pSeries_lpar_hpte_remove fails from Adjunct partition being performed before the ANDCOND test

ARC irqsave/restore macros were missing the compiler barrier, causing a
stale load in irq-enabled region be used in irq-safe region, despite
being changed, because the register holding the value was still live.

The problem manifested as random crashes in timer code when stress
testing ARCLinux (3.9-rc3) on a !SMP && !PREEMPT_COUNT

Here's the exact sequence which caused this:
 (0). tv1[x] <----> t1 <---> t2
 (1). mod_timer(t1) interrupted after it calls timer_pending()
 (2). mod_timer(t2) completes
 (3). mod_timer(t1) resumes but messes up the list
 (4). __runt_timers( ) uses bogus timer_list entry / crashes in
      timer->function

Essentially mod_timer() was racing against itself and while the spinlock
serialized the tv1[] timer link list, timer_pending() called outside the
spinlock, cached timer link list element in a register.
With low register pressure (and a deep register file), lack of barrier
in raw_local_irqsave() as well as preempt_disable (!PREEMPT_COUNT
version), there was nothing to force gcc to reload across the spinlock,
causing a stale value in reg be used for link list manipulation - ensuing
a corruption.

ARcompact disassembly which shows the culprit generated code:

mod_timer:
    push_s blink
    mov_s r13,r0	# timer, timer
..
    ###### timer_pending( )
    ld_s r3,[r13]       # <------ <variable>.entry.next LOADED
    brne r3, 0, @.L163

.L163:
..
    ###### spin_lock_irq( )
    lr  r5, [status32]  # flags
    bic r4, r5, 6       # temp, flags,
    and.f 0, r5, 6      # flags,
    flag.nz r4

    ###### detach_if_pending( ) begins

    tst_s r3,r3  <--------------
			# timer_pending( ) checks timer->entry.next
                        # r3 is NOT reloaded by gcc, using stale value
    beq.d @.L169
    mov.eq r0,0

    #####  detach_timer( ): __list_del( )

    ld r4,[r13,4]    	# <variable>.entry.prev, D.31439
    st r4,[r3,4]     	# <variable>.prev, D.31439
    st r3,[r4]       	# <variable>.next, D.30246

We initially tried to fix this by adding barrier() to preempt_* macros
for !PREEMPT_COUNT but Linus clarified that it was anything but wrong.
http://www.spinics.net/lists/kernel/msg1512709.html

[vgupta: updated commitlog]

Reported-by/Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Cc: Christian Ruppert <christian.ruppert@abilis.com>
Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Debugged-by/Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull libata fixes from Jeff Garzik:
 "The HDIO_DRIVE_* fix is really the biggie.

  1) Fix ATAPI regression, noticed mainly on tape drives, due to a
     commit which mistakenly changed an 'int' return type to a 'bool'.
     Broken by commit 4dce8ba9 ("libata: Use 'bool' return value for
     ata_id_XXX")

  2) Add Slimtype DVD A DS8A8SH ATAPI quirk

  3) ata_piix: Intel Haswell platform quirk

  4) Avoid DMA'ing to stack buffer, when obtaining DEVSLP timings.  IMO
     a mild regression, given that libata previously did not DMA to a
     stack buffer.  Broken by commit commit 803739d2 ("[libata]
     replace sata_settings with devslp_timing")

  5) Fix regression impacting SMART and smartd, broken by commit
     84a9a8cd ("[libata] Set proper SK when CK_COND is set")"

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] Fix HDIO_DRIVE_* ioctl() Linux 3.9 regression
  libata: fix DMA to stack in reading devslp_timing parameters
  ata_piix: Fix DVD not dectected at some Haswell platforms
  libata: Set max sector to 65535 for Slimtype DVD A DS8A8SH drive
  libata: Use integer return value for atapi_command_packet_set

Merge tag 'trace-fixes-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "This includes three fixes.  Two fix features added in 3.9 and one
  fixes a long time minor bug.

  The first patch fixes a race that can happen if the user switches from
  the irqsoff tracer to another tracer.  If a irqs off latency is
  detected, it will try to use the snapshot buffer, but the new tracer
  wont have it allocated.  There's a nasty warning that gets printed and
  the trace is ignored.  Nothing crashes, just a nasty WARN_ON is shown.

  The second patch fixes an issue where if the sysctl is used to disable
  and enable function tracing, it can put the function tracing into an
  unstable state.

  The third patch fixes an issue with perf using the function tracer.
  An update was done, where the stub function could be called during the
  perf function tracing, and that stub function wont have the "control"
  flag set and cause a nasty warning when running perf."

* tag 'trace-fixes-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Do not call stub functions in control loop
  ftrace: Consistently restore trace function on sysctl enabling
  tracing: Fix race with update_max_tr_single and changing tracers

The function tracing control loop used by perf spits out a warning
if the called function is not a control function. This is because
the control function references a per cpu allocated data structure
on struct ftrace_ops that is not allocated for other types of
functions.

commit 0a016409 "ftrace: Optimize the function tracer list loop"

Had an optimization done to all function tracing loops to optimize
for a single registered ops. Unfortunately, this allows for a slight
race when tracing starts or ends, where the stub function might be
called after the current registered ops is removed. In this case we
get the following dump:

root# perf stat -e ftrace:function sleep 1
[   74.339105] WARNING: at include/linux/ftrace.h:209 ftrace_ops_control_func+0xde/0xf0()
[   74.349522] Hardware name: PRIMERGY RX200 S6
[   74.357149] Modules linked in: sg igb iTCO_wdt ptp pps_core iTCO_vendor_support i7core_edac dca lpc_ich i2c_i801 coretemp edac_core crc32c_intel mfd_core ghash_clmulni_intel dm_multipath acpi_power_meter pcspk
r microcode vhost_net tun macvtap macvlan nfsd kvm_intel kvm auth_rpcgss nfs_acl lockd sunrpc uinput xfs libcrc32c sd_mod crc_t10dif sr_mod cdrom mgag200 i2c_algo_bit drm_kms_helper ttm qla2xxx mptsas ahci drm li
bahci scsi_transport_sas mptscsih libata scsi_transport_fc i2c_core mptbase scsi_tgt dm_mirror dm_region_hash dm_log dm_mod
[   74.446233] Pid: 1377, comm: perf Tainted: G        W    3.9.0-rc1 #1
[   74.453458] Call Trace:
[   74.456233]  [<ffffffff81062e3f>] warn_slowpath_common+0x7f/0xc0
[   74.462997]  [<ffffffff810fbc60>] ? rcu_note_context_switch+0xa0/0xa0
[   74.470272]  [<ffffffff811041a2>] ? __unregister_ftrace_function+0xa2/0x1a0
[   74.478117]  [<ffffffff81062e9a>] warn_slowpath_null+0x1a/0x20
[   74.484681]  [<ffffffff81102ede>] ftrace_ops_control_func+0xde/0xf0
[   74.491760]  [<ffffffff8162f400>] ftrace_call+0x5/0x2f
[   74.497511]  [<ffffffff8162f400>] ? ftrace_call+0x5/0x2f
[   74.503486]  [<ffffffff8162f400>] ? ftrace_call+0x5/0x2f
[   74.509500]  [<ffffffff810fbc65>] ? synchronize_sched+0x5/0x50
[   74.516088]  [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[   74.522268]  [<ffffffff810fbc65>] ? synchronize_sched+0x5/0x50
[   74.528837]  [<ffffffff811041a2>] ? __unregister_ftrace_function+0xa2/0x1a0
[   74.536696]  [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[   74.542878]  [<ffffffff8162402d>] ? mutex_lock+0x1d/0x50
[   74.548869]  [<ffffffff81105c67>] unregister_ftrace_function+0x27/0x50
[   74.556243]  [<ffffffff8111eadf>] perf_ftrace_event_register+0x9f/0x140
[   74.563709]  [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[   74.569887]  [<ffffffff8162402d>] ? mutex_lock+0x1d/0x50
[   74.575898]  [<ffffffff8111e94e>] perf_trace_destroy+0x2e/0x50
[   74.582505]  [<ffffffff81127ba9>] tp_perf_event_destroy+0x9/0x10
[   74.589298]  [<ffffffff811295d0>] free_event+0x70/0x1a0
[   74.595208]  [<ffffffff8112a579>] perf_event_release_kernel+0x69/0xa0
[   74.602460]  [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[   74.608667]  [<ffffffff8112a640>] put_event+0x90/0xc0
[   74.614373]  [<ffffffff8112a740>] perf_release+0x10/0x20
[   74.620367]  [<ffffffff811a3044>] __fput+0xf4/0x280
[   74.625894]  [<ffffffff811a31de>] ____fput+0xe/0x10
[   74.631387]  [<ffffffff81083697>] task_work_run+0xa7/0xe0
[   74.637452]  [<ffffffff81014981>] do_notify_resume+0x71/0xb0
[   74.643843]  [<ffffffff8162fa92>] int_signal+0x12/0x17

To fix this a new ftrace_ops flag is added that denotes the ftrace_list_end
ftrace_ops stub as just that, a stub. This flag is now checked in the
control loop and the function is not called if the flag is set.

Thanks to Jovi for not just reporting the bug, but also pointing out
where the bug was in the code.

Link: http://lkml.kernel.org/r/514A8855.7090402@redhat.com
Link: http://lkml.kernel.org/r/1364377499-1900-15-git-send-email-jovi.zhangwei@huawei.comTested-by: NWANG Chao <chaowang@redhat.com>
Reported-by: NWANG Chao <chaowang@redhat.com>
Reported-by: Nzhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If we reenable ftrace via syctl, we currently set ftrace_trace_function
based on the previous simplistic algorithm. This is inconsistent with
what update_ftrace_function does. So better call that helper instead.

Link: http://lkml.kernel.org/r/5151D26F.1070702@siemens.com

Cc: stable@vger.kernel.org
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The commit 34600f0e "tracing: Fix race with max_tr and changing tracers"
fixed the updating of the main buffers with the race of changing
tracers, but left out the fix to the updating of just a per cpu buffer.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>