Instead of returning either a DM_ENDIO_* constant or an error code, add
a new DM_ENDIO_DONE value that means keep errno as is.  This allows us
to easily keep the existing error code in case where we can't push back,
and it also preparares for the new block level status codes with strict
type checking.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

This simplifies the I/O completion path a bit.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

dm-bufio checks a watermark when it allocates a new buffer in
__bufio_new().  However, it doesn't check the watermark when the user
changes /sys/module/dm_bufio/parameters/max_cache_size_bytes.

This may result in a problem - if the watermark is high enough so that
all possible buffers are allocated and if the user lowers the value of
"max_cache_size_bytes", the watermark will never be checked against the
new value because no new buffer would be allocated.

To fix this, change __evict_old_buffers() so that it checks the
watermark.  __evict_old_buffers() is called every 30 seconds, so if the
user reduces "max_cache_size_bytes", dm-bufio will react to this change
within 30 seconds and decrease memory consumption.

Depends-on: 1b0fb5a5 ("dm bufio: avoid a possible ABBA deadlock")
Cc: stable@vger.kernel.org
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

__get_memory_limit() tests if dm_bufio_cache_size changed and calls
__cache_size_refresh() if it did.  It takes dm_bufio_clients_lock while
it already holds the client lock.  However, lock ordering is violated
because in cleanup_old_buffers() dm_bufio_clients_lock is taken before
the client lock.

This results in a possible deadlock and lockdep engine warning.

Fix this deadlock by changing mutex_lock() to mutex_trylock().  If the
lock can't be taken, it will be re-checked next time when a new buffer
is allocated.

Also add "unlikely" to the if condition, so that the optimizer assumes
that the condition is false.

Cc: stable@vger.kernel.org
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Commit 99e6608c "block: Add badblock management for gendisks"
allowed for drivers like pmem and software-raid to advertise a list of
bad media areas. However, it inadvertently added a 'badblocks' to all
block devices. Lets clean this up by having the 'badblocks' attribute
not be visible when the driver has not populated a 'struct badblocks'
instance in the gendisk.

Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: NVishal Verma <vishal.l.verma@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Tested-by: NVishal Verma <vishal.l.verma@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The only difference between ->run_work and ->delay_work, is that
the latter is used to defer running a queue. This is done by
marking the queue stopped, and scheduling ->delay_work to run
sometime in the future. While the queue is stopped, direct runs
or runs through ->run_work will not run the queue.

If we combine the handlers, then we need to handle two things:

1) If a delayed/stopped run is scheduled, then we should not run
   the queue before that has been completed.
2) If a queue is delayed/stopped, the handler needs to restart
   the queue. Normally a run of a queue with the stopped bit set
   would be a no-op.

Case 1 is handled by modifying a currently pending queue run
to the deadline set by the caller of blk_mq_delay_queue().
Subsequent attempts to queue a queue run will find the work
item already pending, and direct runs will see a stopped queue
as before.

Case 2 is handled by adding a new bit, BLK_MQ_S_START_ON_RUN,
that tells the work handler that it should clear a stopped
queue and run the handler.
Reviewed-by: NBart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This modifies (or adds, if not currently pending) an existing
delayed work item.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

They serve the exact same purpose. Get rid of the non-delayed
work variant, and just run it without delay for the normal case.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBart Van Assche <Bart.VanAssche@sandisk.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

list_for_each_entry() isn't super safe if we're freeing the objects
while we traverse the list.  Also don't bother taking the extra
reference, the module refcounting stuff will save us from having anybody
messing with the device while we're trying to unload.
Reported-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Seems like this was forgotten in the bfq-series from Paolo. Let's do it now
so people don't miss out involving Paolo for any future changes or when
reporting bugs.
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

I/O errors triggered by multipathd incorrectly not enabling the no-flush
flag for DM_DEVICE_SUSPEND or DM_DEVICE_RESUME are hard to debug.  Add
more logging to make it easier to debug this.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

No functional change but makes the code easier to read.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Instead of checking MPATHF_QUEUE_IF_NO_PATH,
MPATHF_SAVED_QUEUE_IF_NO_PATH and the no_flush flag to decide whether
or not to push back a request (or bio) if there are no paths available,
only clear MPATHF_QUEUE_IF_NO_PATH in queue_if_no_path() if no_flush has
not been set.  The result is that only a single bit has to be tested in
the hot path to decide whether or not a request must be pushed back and
also that m->lock does not have to be taken in the hot path.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Introduce an enumeration type for the queue mode.  This patch does
not change any functionality but makes the DM code easier to read.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Verify at runtime that __pg_init_all_paths() is called with
multipath.lock held if lockdep is enabled.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Ensure that the assumptions about the caller holding suspend_lock
are checked at runtime if lockdep is enabled.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

The 'cache_size' argument of dm_block_manager_create() has never been
used.  Remove it along with the definitions of the constants passed as
the 'cache_size' argument.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Otherwise the request-based DM blk-mq request_queue will be put into
service without being properly exported via sysfs.

Cc: stable@vger.kernel.org
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Requeuing a request immediately while path initialization is ongoing
causes high CPU usage, something that is undesired.  Hence delay
requeuing while path initialization is in progress.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

If blk_get_request() fails, check whether the failure is due to a path
being removed.  If that is the case, fail the path by triggering a call
to fail_path().  This avoids that the following scenario can be
encountered while removing paths:
* CPU usage of a kworker thread jumps to 100%.
* Removing the DM device becomes impossible.

Delay requeueing if blk_get_request() returns -EBUSY or -EWOULDBLOCK,
and the queue is not dying, because in these cases immediate requeuing
is inappropriate.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

activate_path() is renamed to activate_path_work() which now calls
activate_or_offline_path().  activate_or_offline_path() will be used
by the next commit.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

When calling a dm ioctl that doesn't process any data
(IOCTL_FLAGS_NO_PARAMS), the contents of the data field in struct
dm_ioctl are left initialized.  Current code is incorrectly extending
the size of data copied back to user, causing the contents of kernel
stack to be leaked to user.  Fix by only copying contents before data
and allow the functions processing the ioctl to override.

Cc: stable@vger.kernel.org
Signed-off-by: NAdrian Salido <salidoa@google.com>
Reviewed-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

The log2 of sectors_per_block was already calculated, so we don't have
to use the ilog2 function.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

There is no need to have a duplication of the generic library, i.e. hex2bin().
Replace the open coded variant.
Signed-off-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: NMilan Broz <gmazyland@gmail.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

At least one driver, mtip32xx, has a hard coded dependency on
the value of the reserved tag used for internal commands. While
that should really be fixed up, for now let's ensure that we just
bypass the scheduler tags an allocation marked as reserved. They
are used for house keeping or error handling, so we can safely
ignore them in the scheduler.
Tested-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

mtip32xx supposes that 'request_idx' passed to .init_request()
is tag of the request, and use that as request's tag to initialize
command header.

After MQ IO scheduler is in, request tag assigned isn't same with
the request index anymore, so cause strange hardware failure on
mtip32xx, even whole system panic is triggered.

This patch fixes the issue by initializing command header via
request's real tag.
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Show the SCSI CDB for pending SCSI commands in
/sys/kernel/debug/block/*/mq/*/dispatch and */rq_list. An example
of how SCSI commands are displayed by this code:

ffff8801703245c0 {.op=READ, .cmd_flags=META PRIO, .rq_flags=DONTPREP IO_STAT STATS, .tag=14, .internal_tag=-1, .cmd=Read(10) 28 00 2a 81 1b 30 00 00 08 00}
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: <linux-scsi@vger.kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

This new callback function will be used in the next patch to show
more information about SCSI requests.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Show the operation name, .cmd_flags and .rq_flags as names instead
of numbers.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This patch does not change any functionality but makes it possible
to produce a single line of output with multiple flag-to-name
translations.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Move the "state" attribute from the top level to the "mq" directory
as requested by Omar.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

We currently call blk_mq_free_queue() from blk_cleanup_queue()
before we unregister the debugfs attributes for that queue in
blk_release_queue(). This leaves a window open during which
accessing most of the mq debugfs attributes would cause a
use-after-free. Additionally, the "state" attribute allows
running the queue, which we should not do after the queue has
entered the "dead" state. Fix both cases by unregistering the
debugfs attributes before freeing queue resources starts.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Hctx unregistration involves calling kobject_del(). kobject_del()
must not be called if kobject_add() has not been called. Hence in
the error path only unregister hctxs for which registration succeeded.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Since the blk_mq_debugfs_*register_hctxs() functions register and
unregister all attributes under the "mq" directory, rename these
into blk_mq_debugfs_*register_mq().
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

A later patch will move the call of blk_mq_debugfs_register() to
a function to which the queue name is not passed as an argument.
To avoid having to add a 'name' argument to multiple callers, let
blk_mq_debugfs_register() look up the queue name.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

A later patch in this series will modify blk_mq_debugfs_register()
such that it uses q->kobj.parent to determine the name of a
request queue. Hence make sure that that pointer is initialized
before blk_mq_debugfs_register() is called. To avoid lock inversion,
protect sysfs / debugfs registration with the queue sysfs_lock
instead of the global mutex all_q_mutex.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The caller only looks at the scsi_request result field anyway.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

ide_pm_execute_rq exectures a PM request synchronously, and in the failure
case where it calls __blk_end_request_all it never checks the error field
passed to the end_io callback, so don't bother setting it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NJens Axboe <axboe@fb.com>