For calculating the new timekeeper values store the new cycle_last
value in the timekeeper and update the clock->cycle_last just when we
actually update the new values.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

For implementing a shadow timekeeper and a split calculation/update
region we need to store the cycle_last value in the timekeeper and
update the value in the clocksource struct only in the update region.

Add the extra storage to the timekeeper.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

In order to properly handle the NTP state in future changes to the
timekeeping lock management, this patch moves the management of
all of the ntp state under the timekeeping locks.

This allows us to remove the ntp_lock.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Since we are taking the timekeeping locks, just go ahead
and update any tai change directly, rather then dropping
the lock and calling a function that will just take it again.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

In moving the NTP state to be protected by the timekeeping locks,
be sure to acquire the timekeeping locks prior to calling
ntp functions.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Since ADJ_SETOFFSET adjusts the timekeeping state, process
it as part of the top level do_adjtimex() function in
timekeeping.c.

This avoids deadlocks that could occur once we change the
ntp locking rules.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

In order to change the locking rules, we need to provide
the timespec and tai values rather then having the ntp
logic acquire these values itself.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Move logic that does not need the ntp state to be done
in the timekeeping do_adjtimex() call.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

In preparation for changing the ntp locking rules, move
do_adjtimex and hardpps accessor functions to timekeeping.c,
but keep the code logic in ntp.c.

This patch also introduces a ntp_internal.h file so timekeeping
specific interfaces of ntp.c can be more limitedly shared with
timekeeping.c.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Split out the timex validation done in do_adjtimex into a separate
function. This will help simplify logic in following patches.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

This adds support for the Broadcom timer, used in the following SoCs:
BCM11130, BCM11140, BCM11351, BCM28145, BCM28155

Updates from V6:
- Split DT portion into a separate patch

Updates from V5:
- Rebase to latest arm-soc/for-next

Updates from V4:
- Switch code to use CLOCKSOURCE_OF_DECLARE

Updates from V3:
- Migrate to 3.9 timer framework updates

Updates from V2:
- prepend static fns + fields with kona_

Updates from V1:
- Rename bcm_timer.c to bcm_kona_timer.c
- Pull .h into bcm_kona_timer.c
- Make timers static
- Clean up comment block
- Switched to using clockevents_config_and_register
- Added an error to the get_timer loop if it repeats too much
- Added to Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt
- Added missing readl to timer_disable_and_clear

Note: bcm,kona-timer was kept as the 'compatible' field to make it
specific enough for when there are multiple bcm timers (bcm,timer is
too generic).
Signed-off-by: NChristian Daudt <csd@broadcom.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NJohn Stultz <john.stultz@linaro.org>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Yet again, the kbuild test robot saves the day, noting
I left out defining __timekeeping_set_tai_offset as
static. It even sent me this patch.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

The "NOHZ: local_softirq_pending" message is a largely informational
message.  This makes extra work for customers that have a policy of
investigating all kernel log messages logged at <= KERN_ERR log level.
This patch sets the message to a different log level.

[ tglx: Use pr_warn() ]
Signed-off-by: NRado Vrbovsky <rvrbovsk@redhat.com>
Cc: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/2037057938.893524.1360345050772.JavaMail.root@redhat.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The comments mention HRTIMER_ABS and HRTIMER_REL, these symbols don't
exist, the proper names are HRTIMER_MODE_ABS and HRTIMER_MODE_REL.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: Jiri Kosina <trivial@kernel.org>
Link: http://lkml.kernel.org/r/1363202438-21234-1-git-send-email-ddaney.cavm@gmail.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

We want to shorten the seqcount write hold time. So split the seqlock
into a lock and a seqcount.

Open code the seqwrite_lock in the places which matter and drop the
sequence counter update where it's pointless.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
[jstultz: Merge fixups from CLOCK_TAI collisions]
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Make the lock a separate entity. Preparatory patch for shadow
timekeeper structure.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
[Merged with CLOCK_TAI changes]
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Nothing outside of the timekeeping core needs that lock.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Calculate the cycle interval shifted value once. No functional change,
just makes the code more readable.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Add hrtimer support for CLOCK_TAI, as well as posix timer interfaces.
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

This add a CLOCK_TAI clockid and the needed accessors.

CC: Thomas Gleixner <tglx@linutronix.de>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Currently NTP manages the TAI offset. Since there's plans for a
CLOCK_TAI clockid, push the TAI management into the timekeeping
core.

CC: Thomas Gleixner <tglx@linutronix.de>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Fengs build robot reports:

arch/arm/kernel/process.c: In function 'cpu_idle':
arch/arm/kernel/process.c:211:4: error: implicit declaration of function
'tick_check_broadcast_expired' [-Werror=implicit-function-declaration]

Add the missing inline function for non clockevent builds
Reported-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

There are some new processors whose TSC clocksource won't stop during
suspend. Currently, after system resumes, kernel will use persistent
clock or RTC to compensate the sleep time, but with these nonstop
clocksources, we could skip the special compensation from external
sources, and just use current clocksource for time recounting.

This can solve some time drift bugs caused by some not-so-accurate or
error-prone RTC devices.

The current way to count suspended time is first try to use the persistent
clock, and then try the RTC if persistent clock can't be used. This
patch will change the trying order to:
	suspend-nonstop clocksource -> persistent clock -> RTC

When counting the sleep time with nonstop clocksource, use an accurate way
suggested by Jason Gunthorpe to cover very large delta cycles.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
[jstultz: Small optimization, avoiding re-reading the clocksource]
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Add support for new S3_NONSTOP feature
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Some x86 processors have a TSC clocksource, which continues to run
even when system is suspended. Also most OMAP platforms have a
32 KHz timer which has similar capability. Add a feature flag so that
it could be utilized.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

On some new Intel Atom processors (Penwell and Cloverview), there is
a feature that the TSC won't stop in S3 state, say the TSC value
won't be reset to 0 after resume. This feature makes TSC a more reliable
clocksource and could benefit the timekeeping code during system
suspend/resume cycle, so add a flag for it.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
[jstultz: Fix checkpatch warning]
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Every 11 minutes ntp attempts to update the x86 rtc with the current
system time.  Currently, the x86 code only updates the rtc if the system
time is within +/-15 minutes of the current value of the rtc. This
was done originally to avoid setting the RTC if the RTC was in localtime
mode (common with Windows dualbooting).  Other architectures do a full
synchronization and now that we have better infrastructure to detect
when the RTC is in localtime, there is no reason that x86 should be
software limited to a 30 minute window.

This patch changes the behavior of the kernel to do a full synchronization
(year, month, day, hour, minute, and second) of the rtc when ntp requests
a synchronization between the system time and the rtc.

I've used the RTC library functions in this patchset as they do all the
required bounds checking.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: x86@kernel.org
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: linux-efi@vger.kernel.org
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
[jstultz: Tweak commit message, fold in build fix found by fengguang
Also add select RTC_LIB to X86, per new dependency, as found by prarit]
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

When warping the clock (from a local time RTC), use
timekeeping_inject_offset() to atomically add the offset.

This avoids any minor time error caused by the delay between
reading the time, and then setting the adjusted time.
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

If the Hardware Clock kept in local time,kernel will adjust the time
to be UTC time.But if Hardware Clock kept in UTC time,system will make
a dummy settimeofday call first (sys_tz.tz_minuteswest = 0) to make sure
the time is not shifted,so at this point I think maybe it is not necessary
to set the kernel time once the sys_tz.tz_minuteswest is zero.
Signed-off-by: NDong Zhu <bluezhudong@gmail.com>
[jstultz: Updated to merge with conflicting changes ]
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Avoid going back into deep idle if the tick broadcast IPI is about to
fire.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Arjan van de Veen <arjan@infradead.org>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20130306111537.702278273@linutronix.de

Avoid going back into deep idle if the tick broadcast IPI is about to
fire.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: LAK <linux-arm-kernel@lists.infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Arjan van de Veen <arjan@infradead.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Jason Liu <liu.h.jason@gmail.com>
Link: http://lkml.kernel.org/r/20130306111537.640722922@linutronix.de

On the CPU which gets woken along with the target CPU of the broadcast
the following happens:

  deep_idle()
			<-- spurious wakeup
  broadcast_exit()
    set forced bit
  
  enable interrupts
    
			<-- Nothing happens

  disable interrupts

  broadcast_enter()
			<-- Here we observe the forced bit is set
  deep_idle()

Now after that the target CPU of the broadcast runs the broadcast
handler and finds the other CPU in both the broadcast and the forced
mask, sends the IPI and stuff gets back to normal.

So it's not actually harmful, just more evidence for the theory, that
hardware designers have access to very special drug supplies.

Now there is no point in going back to deep idle just to wake up again
right away via an IPI. Provide a check which allows the idle code to
avoid the deep idle transition.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: LAK <linux-arm-kernel@lists.infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Arjan van de Veen <arjan@infradead.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Jason Liu <liu.h.jason@gmail.com>
Link: http://lkml.kernel.org/r/20130306111537.565418308@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Some brilliant hardware implementations wake multiple cores when the
broadcast timer fires. This leads to the following interesting
problem:

CPU0				CPU1
wakeup from idle		wakeup from idle

leave broadcast mode		leave broadcast mode
 restart per cpu timer		 restart per cpu timer
 	     	 		go back to idle
handle broadcast
 (empty mask)			
				enter broadcast mode
				programm broadcast device
enter broadcast mode
programm broadcast device

So what happens is that due to the forced reprogramming of the cpu
local timer, we need to set a event in the future. Now if we manage to
go back to idle before the timer fires, we switch off the timer and
arm the broadcast device with an already expired time (covered by
forced mode). So in the worst case we repeat the above ping pong
forever.
					
Unfortunately we have no information about what caused the wakeup, but
we can check current time against the expiry time of the local cpu. If
the local event is already in the past, we know that the broadcast
timer is about to fire and send an IPI. So we mark ourself as an IPI
target even if we left broadcast mode and avoid the reprogramming of
the local cpu timer.

This still leaves the possibility that a CPU which is not handling the
broadcast interrupt is going to reach idle again before the IPI
arrives. This can't be solved in the core code and will be handled in
follow up patches.
Reported-by: NJason Liu <liu.h.jason@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: LAK <linux-arm-kernel@lists.infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Arjan van de Veen <arjan@infradead.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Link: http://lkml.kernel.org/r/20130306111537.492045206@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

If the local cpu timer stops in deep idle, we arm the broadcast device
and get woken by an IPI. Now when we return from deep idle we reenable
the local cpu timer unconditionally before handling the IPI. But
that's a pointless exercise: the timer is already expired and the IPI
is on the way. And it's an expensive exercise as we use the forced
reprogramming mode so that we do not lose a timer event. This forced
reprogramming will loop at least once in the retry.

To avoid this reprogramming, we mark the cpu in a pending bit mask
before we send the IPI. Now when the IPI target cpu wakes up, it will
see the pending bit set and skip the reprogramming. The reprogramming
of the cpu local timer will happen in the IPI handler which runs the
cpu local timer interrupt function.
Reported-by: NJason Liu <liu.h.jason@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: LAK <linux-arm-kernel@lists.infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Arjan van de Veen <arjan@infradead.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Link: http://lkml.kernel.org/r/20130306111537.431082074@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Fold in upstream fixes.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Pull perf fixes from Ingo Molnar:
 "Misc minor fixes mostly related to tracing"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  s390: Fix a header dependencies related build error
  tracing: update documentation of snapshot utility
  tracing: Do not return EINVAL in snapshot when not allocated
  tracing: Add help of snapshot feature when snapshot is empty
  ftrace: Update the kconfig for DYNAMIC_FTRACE

Pull networking fixes from David Miller:

 1) Missing cancel of work items in mac80211 MLME, from Ben Greear.

 2) Fix DMA mapping handling in iwlwifi by using coherent DMA for
    command headers, from Johannes Berg.

 3) Decrease the amount of pressure on the page allocator by using order
    1 pages less in iwlwifi, from Emmanuel Grumbach.

 4) Fix mesh PS broadcast OOPS in mac80211, from Marco Porsch.

 5) Don't forget to recalculate idle state in mac80211 monitor
    interface, from Felix Fietkau.

 6) Fix varargs in netfilter conntrack handler, from Joe Perches.

 7) Need to reset entire chip when command queue fills up in iwlwifi,
    from Emmanuel Grumbach.

 8) The TX antenna value must be valid when calibrations are performed
    in iwlwifi, fix from Dor Shaish.

 9) Don't generate netfilter audit log entries when audit is disabled,
    from Gao Feng.

10) Deal with DMA unit hang on e1000e during power state transitions,
    from Bruce Allan.

11) Remove BUILD_BUG_ON check from igb driver, from Alexander Duyck.

12) Fix lockdep warning on i2c handling of igb driver, from Carolyn
    Wyborny.

13) Fix several TTY handling issues in IRDA ircomm tty driver, from
    Peter Hurley.

14) Several QFQ packet scheduler fixes from Paolo Valente.

15) When VXLAN encapsulates on transmit, we have to reset the netfilter
    state.  From Zang MingJie.

16) Fix jiffie check in net_rx_action() so that we really cap the
    processing at 2HZ.  From Eric Dumazet.

17) Fix erroneous trigger of IP option space exhaustion, when routers
    are pre-specified and we are looking to see if we can insert a
    timestamp, we will have the space.  From David Ward.

18) Fix various issues in benet driver wrt waiting for firmware to
    finish POST after resets or errors.  From Gavin Shan and Sathya
    Perla.

19) Fix TX locking in SFC driver, from Ben Hutchings.

20) Like the VXLAN fix above, when we encap in a TUN device we have to
    reset the netfilter state.  This should fix several strange crashes
    reported by Dave Jones and others.  From Eric Dumazet.

21) Don't forget to clean up MAC address resources when shutting down a
    port in mlx4 driver, from Yan Burman.

22) Fix divide by zero in vmxnet3 driver, from Bhavesh Davda.

23) Fix device statistic regression in tg3 when the driver is using
    phylib, from Nithin Sujir.

24) Fix info leak in several netlink handlers, from Mathias Krause.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (79 commits)
  6lowpan: Fix endianness issue in is_addr_link_local().
  rrunner.c: fix possible memory leak in rr_init_one()
  dcbnl: fix various netlink info leaks
  rtnl: fix info leak on RTM_GETLINK request for VF devices
  bridge: fix mdb info leaks
  tg3: Update link_up flag for phylib devices
  ipv6: stop multicast forwarding to process interface scoped addresses
  bridging: fix rx_handlers return code
  netlabel: fix build problems when CONFIG_IPV6=n
  drivers/isdn: checkng length to be sure not memory overflow
  net/rds: zero last byte for strncpy
  bnx2x: Fix SFP+ misconfiguration in iSCSI boot scenario
  bnx2x: Fix intermittent long KR2 link up time
  macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode.
  team: unsyc the devices addresses when port is removed
  bridge: add missing vid to br_mdb_get()
  Fix: sparse warning in inet_csk_prepare_forced_close
  afkey: fix a typo
  MAINTAINERS: Update qlcnic maintainers list
  netlabel: correctly list all the static label mappings
  ...

Pull UML fixes from Richard Weinberger:
 "This update brings various fixes.
  Nothing special...

  In my local queue I have some more fixes which will be sent later to
  you.  3.9 uncovered strange UML issues.  :("

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Use tty_port in SIGWINCH handler
  um: Use tty_port_operations->destruct
  um: fix build failure due to mess-up of sig_info protorype
  um: add missing declaration of 'getrlimit()' and friends
  net : enable tx time stamping in the vde driver.
  hostfs: fix a not needed double check

Pull input updates from Dmitry Torokhov:
 "Except for the largish change to the ALPS driver adding "Dolphin V1"
  support and Wacom getting a new signature of yet another device, the
  rest are straightforward driver fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: mms114 - Fix regulator enable and disable paths
  Input: ads7864 - check return value of regulator enable
  Input: tc3589x-keypad - fix keymap size
  Input: wacom - add support for 0x10d
  Input: ALPS - update documentation for recent touchpad driver mods
  Input: ALPS - add "Dolphin V1" touchpad support
  Input: ALPS - remove unused argument to alps_enter_command_mode()
  Input: cypress_ps2 - fix trackpadi found in Dell XPS12