Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 03 5月, 2017 1 次提交
  3. 25 4月, 2017 1 次提交
  5. 20 4月, 2017 1 次提交
    • H
      f2fs: introduce async IPU policy · 04485987
      由 Hou Pengyang 提交于 
      This patch introduces an ASYNC IPU policy.

Under senario of large # of async updating(e.g. log writing in Android),
disk would be seriously fragmented, and higher frequent gc would be triggered.

This patch uses IPU to rewrite the async update writting, since async is
NOT sensitive to io latency.
Signed-off-by: NHou Pengyang <houpengyang@huawei.com>
      04485987
  7. 13 4月, 2017 1 次提交
  9. 11 4月, 2017 1 次提交
  11. 25 3月, 2017 1 次提交
  13. 22 3月, 2017 13 次提交
  15. 03 3月, 2017 1 次提交
    • D
      statx: Add a system call to make enhanced file info available · a528d35e
      由 David Howells 提交于 
      Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.

The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode.  This change is propagated to the vfs_getattr*()
function.

Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.

========
OVERVIEW
========

The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.

A number of requests were gathered for features to be included.  The
following have been included:

 (1) Make the fields a consistent size on all arches and make them large.

 (2) Spare space, request flags and information flags are provided for
     future expansion.

 (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
     __s64).

 (4) Creation time: The SMB protocol carries the creation time, which could
     be exported by Samba, which will in turn help CIFS make use of
     FS-Cache as that can be used for coherency data (stx_btime).

     This is also specified in NFSv4 as a recommended attribute and could
     be exported by NFSD [Steve French].

 (5) Lightweight stat: Ask for just those details of interest, and allow a
     netfs (such as NFS) to approximate anything not of interest, possibly
     without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
     Dilger] (AT_STATX_DONT_SYNC).

 (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
     its cached attributes are up to date [Trond Myklebust]
     (AT_STATX_FORCE_SYNC).

And the following have been left out for future extension:

 (7) Data version number: Could be used by userspace NFS servers [Aneesh
     Kumar].

     Can also be used to modify fill_post_wcc() in NFSD which retrieves
     i_version directly, but has just called vfs_getattr().  It could get
     it from the kstat struct if it used vfs_xgetattr() instead.

     (There's disagreement on the exact semantics of a single field, since
     not all filesystems do this the same way).

 (8) BSD stat compatibility: Including more fields from the BSD stat such
     as creation time (st_btime) and inode generation number (st_gen)
     [Jeremy Allison, Bernd Schubert].

 (9) Inode generation number: Useful for FUSE and userspace NFS servers
     [Bernd Schubert].

     (This was asked for but later deemed unnecessary with the
     open-by-handle capability available and caused disagreement as to
     whether it's a security hole or not).

(10) Extra coherency data may be useful in making backups [Andreas Dilger].

     (No particular data were offered, but things like last backup
     timestamp, the data version number and the DOS archive bit would come
     into this category).

(11) Allow the filesystem to indicate what it can/cannot provide: A
     filesystem can now say it doesn't support a standard stat feature if
     that isn't available, so if, for instance, inode numbers or UIDs don't
     exist or are fabricated locally...

     (This requires a separate system call - I have an fsinfo() call idea
     for this).

(12) Store a 16-byte volume ID in the superblock that can be returned in
     struct xstat [Steve French].

     (Deferred to fsinfo).

(13) Include granularity fields in the time data to indicate the
     granularity of each of the times (NFSv4 time_delta) [Steve French].

     (Deferred to fsinfo).

(14) FS_IOC_GETFLAGS value.  These could be translated to BSD's st_flags.
     Note that the Linux IOC flags are a mess and filesystems such as Ext4
     define flags that aren't in linux/fs.h, so translation in the kernel
     may be a necessity (or, possibly, we provide the filesystem type too).

     (Some attributes are made available in stx_attributes, but the general
     feeling was that the IOC flags were to ext[234]-specific and shouldn't
     be exposed through statx this way).

(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
     Michael Kerrisk].

     (Deferred, probably to fsinfo.  Finding out if there's an ACL or
     seclabal might require extra filesystem operations).

(16) Femtosecond-resolution timestamps [Dave Chinner].

     (A __reserved field has been left in the statx_timestamp struct for
     this - if there proves to be a need).

(17) A set multiple attributes syscall to go with this.

===============
NEW SYSTEM CALL
===============

The new system call is:

	int ret = statx(int dfd,
			const char *filename,
			unsigned int flags,
			unsigned int mask,
			struct statx *buffer);

The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat().  There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags.  There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.

Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):

 (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
     respect.

 (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
     its attributes with the server - which might require data writeback to
     occur to get the timestamps correct.

 (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
     network filesystem.  The resulting values should be considered
     approximate.

mask is a bitmask indicating the fields in struct statx that are of
interest to the caller.  The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat().  It should be noted that asking for
more information may entail extra I/O operations.

buffer points to the destination for the data.  This must be 256 bytes in
size.

======================
MAIN ATTRIBUTES RECORD
======================

The following structures are defined in which to return the main attribute
set:

	struct statx_timestamp {
		__s64	tv_sec;
		__s32	tv_nsec;
		__s32	__reserved;
	};

	struct statx {
		__u32	stx_mask;
		__u32	stx_blksize;
		__u64	stx_attributes;
		__u32	stx_nlink;
		__u32	stx_uid;
		__u32	stx_gid;
		__u16	stx_mode;
		__u16	__spare0[1];
		__u64	stx_ino;
		__u64	stx_size;
		__u64	stx_blocks;
		__u64	__spare1[1];
		struct statx_timestamp	stx_atime;
		struct statx_timestamp	stx_btime;
		struct statx_timestamp	stx_ctime;
		struct statx_timestamp	stx_mtime;
		__u32	stx_rdev_major;
		__u32	stx_rdev_minor;
		__u32	stx_dev_major;
		__u32	stx_dev_minor;
		__u64	__spare2[14];
	};

The defined bits in request_mask and stx_mask are:

	STATX_TYPE		Want/got stx_mode & S_IFMT
	STATX_MODE		Want/got stx_mode & ~S_IFMT
	STATX_NLINK		Want/got stx_nlink
	STATX_UID		Want/got stx_uid
	STATX_GID		Want/got stx_gid
	STATX_ATIME		Want/got stx_atime{,_ns}
	STATX_MTIME		Want/got stx_mtime{,_ns}
	STATX_CTIME		Want/got stx_ctime{,_ns}
	STATX_INO		Want/got stx_ino
	STATX_SIZE		Want/got stx_size
	STATX_BLOCKS		Want/got stx_blocks
	STATX_BASIC_STATS	[The stuff in the normal stat struct]
	STATX_BTIME		Want/got stx_btime{,_ns}
	STATX_ALL		[All currently available stuff]

stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.

Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution.  Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.

The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does.  The following
attributes map to FS_*_FL flags and are the same numerical value:

	STATX_ATTR_COMPRESSED		File is compressed by the fs
	STATX_ATTR_IMMUTABLE		File is marked immutable
	STATX_ATTR_APPEND		File is append-only
	STATX_ATTR_NODUMP		File is not to be dumped
	STATX_ATTR_ENCRYPTED		File requires key to decrypt in fs

Within the kernel, the supported flags are listed by:

	KSTAT_ATTR_FS_IOC_FLAGS

[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]

New flags include:

	STATX_ATTR_AUTOMOUNT		Object is an automount trigger

These are for the use of GUI tools that might want to mark files specially,
depending on what they are.

Fields in struct statx come in a number of classes:

 (0) stx_dev_*, stx_blksize.

     These are local system information and are always available.

 (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
     stx_size, stx_blocks.

     These will be returned whether the caller asks for them or not.  The
     corresponding bits in stx_mask will be set to indicate whether they
     actually have valid values.

     If the caller didn't ask for them, then they may be approximated.  For
     example, NFS won't waste any time updating them from the server,
     unless as a byproduct of updating something requested.

     If the values don't actually exist for the underlying object (such as
     UID or GID on a DOS file), then the bit won't be set in the stx_mask,
     even if the caller asked for the value.  In such a case, the returned
     value will be a fabrication.

     Note that there are instances where the type might not be valid, for
     instance Windows reparse points.

 (2) stx_rdev_*.

     This will be set only if stx_mode indicates we're looking at a
     blockdev or a chardev, otherwise will be 0.

 (3) stx_btime.

     Similar to (1), except this will be set to 0 if it doesn't exist.

=======
TESTING
=======

The following test program can be used to test the statx system call:

	samples/statx/test-statx.c

Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.

Here's some example output.  Firstly, an NFS directory that crosses to
another FSID.  Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.

	[root@andromeda ~]# /tmp/test-statx -A /warthog/data
	statx(/warthog/data) = 0
	results=7ff
	  Size: 4096            Blocks: 8          IO Block: 1048576  directory
	Device: 00:26           Inode: 1703937     Links: 125
	Access: (3777/drwxrwxrwx)  Uid:     0   Gid:  4041
	Access: 2016-11-24 09:02:12.219699527+0000
	Modify: 2016-11-17 10:44:36.225653653+0000
	Change: 2016-11-17 10:44:36.225653653+0000
	Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)

Secondly, the result of automounting on that directory.

	[root@andromeda ~]# /tmp/test-statx /warthog/data
	statx(/warthog/data) = 0
	results=7ff
	  Size: 4096            Blocks: 8          IO Block: 1048576  directory
	Device: 00:27           Inode: 2           Links: 125
	Access: (3777/drwxrwxrwx)  Uid:     0   Gid:  4041
	Access: 2016-11-24 09:02:12.219699527+0000
	Modify: 2016-11-17 10:44:36.225653653+0000
	Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      a528d35e
  17. 28 2月, 2017 2 次提交
  19. 25 2月, 2017 1 次提交
  21. 24 2月, 2017 2 次提交
    • C
      f2fs: change recovery policy of xattr node block · d260081c
      由 Chao Yu 提交于 
      Currently, if we call fsync after updating the xattr date belongs to the
file, f2fs needs to trigger checkpoint to keep xattr data consistent. But,
this policy cause low performance as checkpoint will block most foreground
operations and cause unneeded and unrelated IOs around checkpoint.

This patch will reuse regular file recovery policy for xattr node block,
so, we change to write xattr node block tagged with fsync flag to warm
area instead of cold area, and during recovery, we search warm node chain
for fsynced xattr block, and do the recovery.

So, for below application IO pattern, performance can be improved
obviously:
- touch file
- create/update/delete xattr entry in file
- fsync file
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      d260081c
    • J
      f2fs: avoid out-of-order execution of atomic writes · e7c75ab0
      由 Jaegeuk Kim 提交于 
      We need to flush data writes before flushing last node block writes by using
FUA with PREFLUSH. We don't need to guarantee precedent node writes since if
those are not written, we can't reach to the last node block when scanning
node block chain during roll-forward recovery.
Afterwards f2fs_wait_on_page_writeback guarantees all the IO submission to
disk, which builds a valid node block chain.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      e7c75ab0
  23. 23 2月, 2017 2 次提交
  25. 29 1月, 2017 2 次提交
    • J
      f2fs: drop exist_data for inline_data when truncated to 0 · bb95d9ab
      由 Jaegeuk Kim 提交于 
      A test program gets the SEEK_DATA with two values between
a new created file and the exist file on f2fs filesystem.

F2FS filesystem,  (the first "test1" is a new file)
SEEK_DATA size != 0 (offset = 8192)
SEEK_DATA size != 0 (offset = 4096)

PNFS filesystem, (the first "test1" is a new file)
SEEK_DATA size != 0 (offset = 4096)
SEEK_DATA size != 0 (offset = 4096)

int main(int argc, char **argv)
{
        char *filename = argv[1];
        int offset = 1, i = 0, fd = -1;

        if (argc < 2) {
                printf("Usage: %s f2fsfilename\n", argv[0]);
                return -1;
        }

        /*
        if (!access(filename, F_OK) || errno != ENOENT) {
                printf("Needs a new file for test, %m\n");
                return -1;
        }*/

        fd = open(filename, O_RDWR | O_CREAT, 0777);
        if (fd < 0) {
                printf("Create test file %s failed, %m\n", filename);
                return -1;
        }

        for (i = 0; i < 20; i++) {
                offset = 1 << i;
                ftruncate(fd, 0);
                lseek(fd, offset, SEEK_SET);
                write(fd, "test", 5);
                /* Get the alloc size by seek data equal zero*/
                if (lseek(fd, 0, SEEK_DATA)) {
                        printf("SEEK_DATA size != 0 (offset = %d)\n", offset);
                        break;
                }
        }

        close(fd);
        return 0;
}
Reported-and-Tested-by: NKinglong Mee <kinglongmee@gmail.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      bb95d9ab
    • J
      f2fs: show the max number of atomic operations · 26a28a0c
      由 Jaegeuk Kim 提交于 
      This patch adds to show the max number of atomic operations which are
conducting concurrently.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      26a28a0c
  27. 13 12月, 2016 1 次提交
  29. 12 12月, 2016 1 次提交
  31. 06 12月, 2016 1 次提交
  33. 30 11月, 2016 1 次提交
    • J
      f2fs: do not activate auto_recovery for fallocated i_size · 26787236
      由 Jaegeuk Kim 提交于 
      If a file needs to keep its i_size by fallocate, we need to turn off auto
recovery during roll-forward recovery.

This will resolve the below scenario.

1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 4096" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "falloc -k 4096 4096" -c "fsync"
3. md5sum /mnt/f2fs/file;
4. godown /mnt/f2fs/
5. umount /mnt/f2fs/
6. mount -t f2fs /dev/sdx /mnt/f2fs
7. md5sum /mnt/f2fs/file
Reported-by: NChao Yu <chao@kernel.org>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      26787236
  35. 26 11月, 2016 4 次提交
    • C
      f2fs: fix fdatasync · 281518c6
      由 Chao Yu 提交于 
      For below two cases, we can't guarantee data consistence:

a)
1. xfs_io "pwrite 0 4195328" "fsync"
2. xfs_io "pwrite 4195328 1024" "fdatasync"
3. godown
4. umount & mount
--> isize we updated before fdatasync won't be recovered

b)
1. xfs_io "pwrite -S 0xcc 0 4202496" "fsync"
2. xfs_io "fpunch 4194304 4096" "fdatasync"
3. godown
4. umount & mount
--> dnode we punched before fdatasync won't be recovered

The reason is that normally fdatasync won't be aware of modification
of metadata in file, e.g. isize changing, dnode updating, so in ->fsync
we will skip flushing node pages for above cases, result in making
fdatasynced file being lost during recovery.

Currently we have introduced DIRTY_META global list in sbi for tracking
dirty inode selectively, so in fdatasync we can choose to flush nodes
depend on dirty state of current inode in the list.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      281518c6
    • C
      f2fs: don't wait writeback for datas during checkpoint · 36951b38
      由 Chao Yu 提交于 
      Normally, while committing checkpoint, we will wait on all pages to be
writebacked no matter the page is data or metadata, so in scenario where
there are lots of data IO being submitted with metadata, we may suffer
long latency for waiting writeback during checkpoint.

Indeed, we only care about persistence for pages with metadata, but not
pages with data, as file system consistent are only related to metadate,
so in order to avoid encountering long latency in above scenario, let's
recognize and reference metadata in submitted IOs, wait writeback only
for metadatas.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      36951b38
    • J
      f2fs: avoid BG_GC in f2fs_balance_fs · 7702bdbe
      由 Jaegeuk Kim 提交于 
      If many threads hit has_not_enough_free_secs() in f2fs_balance_fs() at the same
time, all the threads would do FG_GC or BG_GC.
In this critical path, we totally don't need to do BG_GC at all.
Let's avoid that.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      7702bdbe
    • J
      f2fs: use err for f2fs_preallocate_blocks · a7de6086
      由 Jaegeuk Kim 提交于 
      This patch has no functional change.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      a7de6086
  37. 24 11月, 2016 3 次提交