Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 08 12月, 2006 1 次提交
  3. 01 12月, 2006 2 次提交
  5. 22 11月, 2006 1 次提交
    • D
      WorkStruct: Pass the work_struct pointer instead of context data · 65f27f38
      由 David Howells 提交于 
      Pass the work_struct pointer to the work function rather than context data.
The work function can use container_of() to work out the data.

For the cases where the container of the work_struct may go away the moment the
pending bit is cleared, it is made possible to defer the release of the
structure by deferring the clearing of the pending bit.

To make this work, an extra flag is introduced into the management side of the
work_struct.  This governs auto-release of the structure upon execution.

Ordinarily, the work queue executor would release the work_struct for further
scheduling or deallocation by clearing the pending bit prior to jumping to the
work function.  This means that, unless the driver makes some guarantee itself
that the work_struct won't go away, the work function may not access anything
else in the work_struct or its container lest they be deallocated..  This is a
problem if the auxiliary data is taken away (as done by the last patch).

However, if the pending bit is *not* cleared before jumping to the work
function, then the work function *may* access the work_struct and its container
with no problems.  But then the work function must itself release the
work_struct by calling work_release().

In most cases, automatic release is fine, so this is the default.  Special
initiators exist for the non-auto-release case (ending in _NAR).
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
      65f27f38
  7. 12 10月, 2006 1 次提交
    • A
      [PATCH] fs/bio.c: tweaks · bf02c082
      由 Andreas Mohr 提交于 
      - Calculate a variable in bvec_alloc_bs() only once needed, not earlier
  (bio.o down from 18408 to 18376 Bytes, 32 Bytes saved, probably due to
  data locality improvements).

- Init variable idx to silence a gcc warning which already existed in the
  unmodified original base file (bvec_alloc_bs() handles idx correctly, so
  there's no need for the warning):

	fs/bio.c: In function `bio_alloc_bioset':
	fs/bio.c:169: warning: `idx' may be used uninitialized in this function
Signed-off-by: NAndreas Mohr <andi@lisas.de>
Acked-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      bf02c082
  9. 01 10月, 2006 2 次提交
  11. 18 6月, 2006 1 次提交
  13. 24 5月, 2006 1 次提交
  15. 27 3月, 2006 3 次提交
  17. 26 3月, 2006 1 次提交
  19. 24 3月, 2006 1 次提交
  21. 23 3月, 2006 1 次提交
  23. 31 1月, 2006 1 次提交
  25. 15 1月, 2006 1 次提交
  27. 09 1月, 2006 1 次提交
  29. 06 1月, 2006 1 次提交
  31. 16 12月, 2005 1 次提交
    • M
      [SCSI] seperate max_sectors from max_hw_sectors · defd94b7
      由 Mike Christie 提交于 
      - export __blk_put_request and blk_execute_rq_nowait
needed for async REQ_BLOCK_PC requests
- seperate max_hw_sectors and max_sectors for block/scsi_ioctl.c and
SG_IO bio.c helpers per Jens's last comments. Since block/scsi_ioctl.c SG_IO was
already testing against max_sectors and SCSI-ml was setting max_sectors and
max_hw_sectors to the same value this does not change any scsi SG_IO behavior. It only
prepares ll_rw_blk.c, scsi_ioctl.c and bio.c for when SCSI-ml begins to set
a valid max_hw_sectors for all LLDs. Today if a LLD does not set it
SCSI-ml sets it to a safe default and some LLDs set it to a artificial low
value to overcome memory and feedback issues.

Note: Since we now cap max_sectors to BLK_DEF_MAX_SECTORS, which is 1024,
drivers that used to call blk_queue_max_sectors with a large value of
max_sectors will now see the fs requests capped to BLK_DEF_MAX_SECTORS.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
      defd94b7
  33. 15 12月, 2005 1 次提交
    • M
      [SCSI] Convert SCSI mid-layer to scsi_execute_async · 6e68af66
      由 Mike Christie 提交于 
      Add scsi helpers to create really-large-requests and convert
scsi-ml to scsi_execute_async().

Per Jens's previous comments, I placed this function in scsi_lib.c.
I made it follow all the queue's limits - I think I did at least :), so
I removed the warning on the function header.

I think the scsi_execute_* functions should eventually take a request_queue
and be placed some place where the dm-multipath hw_handler can use them
if that failover code is going to stay in the kernel. That conversion
patch will be sent in another mail though.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
      6e68af66
  35. 28 10月, 2005 1 次提交
    • A
      [PATCH] gfp_t: fs/* · 27496a8c
      由 Al Viro 提交于 
       - ->releasepage() annotated (s/int/gfp_t), instances updated
 - missing gfp_t in fs/* added
 - fixed misannotation from the original sweep caught by bitwise checks:
   XFS used __nocast both for gfp_t and for flags used by XFS allocator.
   The latter left with unsigned int __nocast; we might want to add a
   different type for those but for now let's leave them alone.  That,
   BTW, is a case when __nocast use had been actively confusing - it had
   been used in the same code for two different and similar types, with
   no way to catch misuses.  Switch of gfp_t to bitwise had caught that
   immediately...

One tricky bit is left alone to be dealt with later - mapping->flags is
a mix of gfp_t and error indications.  Left alone for now.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      27496a8c
  37. 09 10月, 2005 1 次提交
  39. 10 9月, 2005 1 次提交
  41. 08 9月, 2005 1 次提交
  43. 08 8月, 2005 1 次提交
  45. 28 7月, 2005 1 次提交
  47. 08 7月, 2005 1 次提交
  49. 20 6月, 2005 3 次提交
  51. 01 5月, 2005 1 次提交
  53. 17 4月, 2005 1 次提交
    • L
      Linux-2.6.12-rc2 · 1da177e4
      由 Linus Torvalds 提交于 
      Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
      1da177e4