- 02 7月, 2007 2 次提交
-
-
由 Richard Purdie 提交于
The PXA CKEN changes broken syspend/resume on the pxa27x. This patch corrects the problem and fixes another couple of bad references. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Randy Dunlap 提交于
Fix section mismatch warnings: WARNING: sound/built-in.o(.exit.text+0x3ad): Section mismatch: reference to .init.text: (between 'sb_exit' and 'unload_uart6850') WARNING: sound/built-in.o(.exit.text+0x753): Section mismatch: reference to .init.text: (between 'snd_mts64_module_exit' and 'snd_portman_module_exit') Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 6月, 2007 2 次提交
-
-
由 Randy Dunlap 提交于
Change __devexit to __devexit_p: sound/isa/opl3sa2.c:956: error: expected expression before '__attribute__' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Cannot mix const and __initdata: sound/pci/ice1712/prodigy192.c:708: error: ak4114_controls causes a section type conflict Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 6月, 2007 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The old snd-powermac driver has some serious refcounting issues when initialisation fails, which is the case on all new machines with a layout-id since those are handled by the new snd-aoa driver. Some of those bugs seem to have been under the radar for some time (like double pci_dev_put), but one was actually added in 2.6.22 with Stephen attempt at teaching refcounting to the driver which didn't do it at all. This patch fixes both, thus removing all sort of kref errors that would happen if that driver gets loaded on a G5 machine or a recent PowerBook due to OF nodes left around with a 0 refcount. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 01 6月, 2007 1 次提交
-
-
由 Yoann Padioleau 提交于
I have made a tool to parse the kernel that does not pre-process the source. That means that my parser tries to parse all the code, including code in the #else branch or code that is not often compiled because the driver is not very used (or not used at all). So, my parser sometimes reports parse error not originally detected by gcc. Here is my (first) patch. [akpm@linux-foundation.org: fix amd8111e.c] Signed-off-by: NYoann Padioleau <padator@wanadoo.fr> Acked-by: NMatthew Wilcox <matthew@wil.cx> Acked-by: NWim Van Sebroeck <wim@iguana.be> Acked-by: NDavid Woodhouse <dwmw2@infradead.org> Acked-by: NJeff Garzik <jeff@garzik.org> Acked-by: NJames Bottomley <James.Bottomley@steeleye.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 5月, 2007 13 次提交
-
-
由 Takashi Iwai 提交于
STAC922x provides the capture boost level up to 4, but actually it works only up to 2. Since the range of the mixer is automatically defined from amp-capability bits, we need to override the value beforehand. snd_hda_override_amp_caps() is introduced for this purpose. The function patch_stac922x() calls this for NID 0x12 (Mux Capture Volume). This should fix another recording problem on Intel Macs. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
The recent fix for STAC92xx surround outputs broke the input pin setting for shared line-in and mic jacks. This patch fixes the breakage. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Steve Longerbeam 提交于
Fix pin default configs for speaker associations and sequence for Gateway MX6453 machine with STAC925x codecs. Signed-off-by: NSteve Longerbeam <stevel@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Tobin Davis 提交于
This patch adds the MSI K9N Ultra system to the realtek patch. Signed-off-by: NTobin Davis <tdavis@dsl-only.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Daniel T Chen 提交于
Tested and verified in #alsa/Freenode on Tuesday, May 29, 2007. Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: crimsun@Box.ncat.edu Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Baruch Even 提交于
Add a quirk for MSI S420 (based on a guess work). From: Baruch Even <baruch@ev-en.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Zoltan Devai 提交于
This should fix a spinlock lockup bug on the s3c24xx arch. From: Zoltan Devai <zdevai@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Daniel Drake 提交于
Commit f32610ed added ALC660VD support, but this caused a 2.6.21 regression for some users. The ASUS M2V device is now detected as ALC660VD rather than ALC660/861 but the PCI quirk was not carried over. This patch allows affected users to use audio again. http://bugzilla.kernel.org/show_bug.cgi?id=8273 https://bugs.gentoo.org/show_bug.cgi?id=178243Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Reported by Eric Sesterhenn. Fix the wrong checks of extra voice pointer, which may cause NULL dereferences. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Christian Rothlaender 提交于
This patch adds support for the ASUS A8J Series 56k Modem (Motorola SM56) Signed-off-by: NChristian Rothlaender <christian@rothlaender.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Tobin Davis 提交于
This patch fixes an automute code issue for systems that do not rely on eapd support. Signed-off-by: NTobin Davis <tdavis@dsl-only.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Tobin Davis 提交于
This patch adds more Dell systems and a Panasonic laptop with STAC9200 codecs. Signed-off-by: NTobin Davis <tdavis@dsl-only.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Tobin Davis 提交于
This patch adds support for the Gateway NX860 system. Signed-off-by: NTobin Davis <tdavis@dsl-only.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 22 5月, 2007 1 次提交
-
-
由 Alexey Dobriyan 提交于
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 5月, 2007 8 次提交
-
-
由 Thomas Reitmayr 提交于
This patch makes sure that short USB replies are treated as an error when requesting the value of a certain mixer control. Signed-off-by: NThomas Reitmayr <thomas@devbase.at> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Daniel T Chen 提交于
Included is a patch against current alsa-kernel hg tip adding quirks that Ubuntu Dapper/Edgy/Feisty contains. Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Rene Herman 提交于
isa_register_driver() returns an error if no device is found and it's no fatal error for the drivers with pnp support. Signed-off-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Kailang Yang 提交于
Fixed some platform no sound and Add JD Function for below platform list: Sony(0x104d) 0x9015, 0x900e, 0x1f00 Toshiba(0x1179) DALLAS 0xff00, 0xff01 Targa(0x1462) 0x28fb Asus(0x1043) A7J 0x060d Lenovo(0x17aa) 0x3bfd, 0x2085 MEDION(0x17c0) MD2 0x4071 Signed-off-by: NKailang Yang <kailang@realtek.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Liam Girdwood 提交于
This patch fixes a bug whereby AC97 bus device data was being clobbered when AC97 codecs using the generic ac97_codec.c driver were being registered. Codecs that didn't use the generic driver were unaffected (e.g. WM9712, WM9713). Changes:- o Add new AC97 codec class for custom (or need bus dev registration) AC97 codecs. o Only register/deregister this custom codec device with the AC97 bus. The generic AC97 driver already does this for generic codec devices. This may be related to bug #3038 :- https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3038Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Liam Girdwood 提交于
This patch fixes a bug whereby the GPL'ed symbol ac97_dai was being declared as static. Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
In some cases, mixer elements return -EINVAL because it couldn't obtain proper amp_cap bits. The patch improves the robustness, trying the amp_cap query again in such a case. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Daniel Drake 提交于
This patch adds the ID for another quickcam microphone, reported by freqmod on ALSA ticket #0003040 I'm going to submit a USB patch separately to provide a macro to simplify these entries, as suggested by Alan Stern. We could switch to using that in future. Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 11 5月, 2007 12 次提交
-
-
由 Steve Longerbeam 提交于
Some verb tables (such as an Asus VT sent by IDT) contain only speaker outs in the default pin configs, and no line-outs. In such a case the speaker sequence numbers have to be used to order the speaker out pins, just as is being done for line-out pins. Then, when speaker-outs are copied to line-outs, the line-outs will be ordered properly. Signed-off-by: NSteve Longerbeam <stevel@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Kailang Yang 提交于
- Added ALC861VD Lenovo support (17aa:3802, 17aa:2066) - Modify alc_subsystem_id Signed-off-by: NKailang Yang <kailang@realtek.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fix the retrival of widget connection list in the generic parser. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
Add a workaround for the ESI M4U that claims to support 32-byte packets but ignores the remaining bytes of packets bigger than four bytes. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
The firmware of the M-Audio USB Uno MIDI Interface has, at least in hardware revision 1.25, a bug that garbles its USB output. When it receives a Note On MIDI message that uses running status, the resulting USB MIDI packet has a wrong CIN (4 instead of 9) and a wrong length (2 bytes, the status byte is still missing). This patch adds a workaround to track the CINs and the MIDI messages of received USB MIDI packets to detect whether a packet with CIN 4 is a correct SysEx packet or a buggy running status packet. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Daniel Drake 提交于
Commit 93c8bf45 modified the USB device matching behaviour to ignore interface class matches if the device class is vendor-specific. This patch adds explicit ID matches for Logitech QuickCam devices, which have a vendor specific device class (but standards-compliant audio interfaces). This fixes a 2.6.20 regression where the audio component of these devices was no longer usable. http://bugs.gentoo.org/show_bug.cgi?id=175715 https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/93822 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3040 Based on a patch from sergiom Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
The AMP mute bit is bit 7. No real influence since no one uses this definition yet, though... Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fix the auto-mute controls of ALC880 uniwill model. Split to two individual functions to handle HP and front-mic mutes. For front-mic mute, use snd_hda_codec_amp_update() to be consistent with mixer. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fix AD1988 SPDIF playback route control for selecting ADC1-3. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Andrew Morton 提交于
I quuestion the testing status of that patch! Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 David Rientjes 提交于
From: David Rientjes <rientjes@google.com> isapnp[] is only used for CONFIG_PNP. If this configuration option is not set, do not declare the array. Cc: Adam Belay <ambx1@neo.rr.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Steve Longerbeam 提交于
* fixed surround playback on stac922x. Pin direction control bits were not being set correctly in stac92xx_set_pinctl(). Specifically it would refuse to set the port as an output if the port was already configured as an input. Last hunk (#8). * fixed an input mux bug on 92xx codecs. When there is more than one possible input calculated for the muxes, the actual mux widget never gets set from its reset default, which is index 0, in the stac9221 case that is port E. So alsamixer/amixer/gnome-mixer report the Mic as being the selected input source, but in fact is something else (line-in port E in stac9221 case). Another problem with this is that if you actually try to set the mux input to 'Mic', nothing happens because *cur_val == idx (see snd_hda_input_mux_put). You have to actually toggle input source to line-in then back to mic to actually set the mux widget. Hunk #7. * fixed some typos in patch_sigmatel.c. Hunk #6. * fix to stac92xx_add_dyn_out_pins() that fixes surround playback on codecs with less that 4 DACs (stac9205 for example). It reads the widget caps cache created by hda_codec to count the total number of analog DACs found. It then uses that to determine whether there will be enough independent DACs available for line/mic switch controls. Hunk #1, #2, and #3. * improvements to stac92xx_auto_fill_dac_nids() to make it more general. This fixes surround playback on some codecs in combination with the fix to stac92xx_add_dyn_out_pins() above. It reads the full connection list now, instead of just the first entry, and then locates an analog DAC in the list. If one is found and it's free, assign it to that line-out. If no free DAC is found for the line-out, return -ENODEV. It also makes sure to actually select the chosen DAC if more than one DAC is input to the pin. Hunks #4, #5. Signed-off-by: NSteve Longerbeam <stevel@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-