- 04 5月, 2007 1 次提交
-
-
由 Pavel Emelianov 提交于
Cleanup of dev_base list use, with the aim to simplify making device list per-namespace. In almost every occasion, use of dev_base variable and dev->next pointer could be easily replaced by for_each_netdev loop. A few most complicated places were converted to using first_netdev()/next_netdev(). Signed-off-by: NPavel Emelianov <xemul@openvz.org> Acked-by: NKirill Korotaev <dev@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 5月, 2007 1 次提交
-
-
由 Patrick McHardy 提交于
Add __dev_getfirstbyhwtype for callers that don't want a reference but some data from the device and thus need to take the rtnl anyway. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 4月, 2007 1 次提交
-
-
由 Rusty Russell 提交于
Herbert Xu conviced me that a new flag was overkill; every driver currently overrides get_stats, so we might as well make the internal one the default. If someone did fail to set get_stats, they would now get all 0 stats instead of "No statistics available". Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 4月, 2007 2 次提交
-
-
由 Johannes Berg 提交于
This patch cleans up the call paths from the core code into wext. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This patch moves dev/core/wireless.c to net/wireless/wext.c. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2007 22 次提交
-
-
由 Herbert Xu 提交于
Now that Patrick has added the code to deal with GSO in netfilter, we no longer need the crutch that computes partial checksums just before transmission. This patch turns this into a warning again. If this goes OK, we can then turn it into a BUG_ON and remove the gso_send_check cruft. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Morton 提交于
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Borislav Petkov 提交于
Correct the function name in the comments supplied with register_netdev() Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
It isn't any faster to test a boolean global variable than do a simple check for empty list. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Switch ingress queueing back to use ingress_lock. qdisc_lock_tree now locks both the ingress and egress qdiscs on the device. All changes to data that might be used on both ingress and egress needs to be protected by using qdisc_lock_tree instead of manually taking dev->queue_lock. Additionally the qdisc stats_lock needs to be initialized to ingress_lock for ingress qdiscs. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Change the bridging hook to be simple function with return value rather than modifying the skb argument. This could generate better code and is cleaner. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
-
由 Herbert Xu 提交于
The skb transport pointer is currently used to specify the start of the checksum region for transmit checksum offload. Unfortunately, the same pointer is also used during receive side processing. This creates a problem when we want to retransmit a received packet with partial checksums since the skb transport pointer would be overwritten. This patch solves this problem by creating a new 16-bit csum_start offset value to replace the skb transport header for the purpose of checksums. This offset is calculated from skb->head so that it does not have to change when skb->data changes. No extra space is required since csum_offset itself fits within a 16-bit word so we can use the other 16 bits for csum_start. For backwards compatibility, just before we push a packet with partial checksums off into the device driver, we set the skb transport header to what it would have been under the old scheme. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rusty Russell 提交于
Network drivers which keep stats allocate their own stats structure then write a get_stats() function to return them. It would be nice if this were done by default. 1) Add a new "stats" field to "struct net_device". 2) Add a new feature field to say "this driver uses the internal one" 3) Have a default "get_stats" which returns NULL if that feature not set. 4) Change callers to check result of get_stats call for NULL, not if ->get_stats is set. This should not break backwards compatibility with older drivers, yet allow modern drivers to shed some boilerplate code. Lightly tested: works for a modified lguest network driver. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Renaming skb->h to skb->transport_header, skb->nh to skb->network_header and skb->mac to skb->mac_header, to match the names of the associated helpers (skb[_[re]set]_{transport,network,mac}_header). Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the places where we need a pointer to the transport header, it is still legal to touch skb->h.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the quite common 'skb->h.raw - skb->data' sequence. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the common, open coded 'skb->h.raw = skb->data' operation, so that we can later turn skb->h.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple cases: skb->h.raw = skb->data; skb->h.raw = {skb_push|[__]skb_pull}() The next ones will handle the slightly more "complex" cases. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Show what protocols are bound to what packet types in /proc/net/ptype Uses kallsyms to decode function pointers if possible. Example: Type Device Function ALL eth1 packet_rcv_spkt+0x0 0800 ip_rcv+0x0 0806 arp_rcv+0x0 86dd :ipv6:ipv6_rcv+0x0 Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The seq_file operations stuff can be marked constant to get it out of dirty cache. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
For Eric, mark packet type and network device watermarks as read mostly. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the places where we need a pointer to the mac header, it is still legal to touch skb->mac.raw directly if just adding to, subtracting from or setting it to another layer header. This one also converts some more cases to skb_reset_mac_header() that my regex missed as it had no spaces before nor after '=', ugh. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the common, open coded 'skb->mac.raw = skb->data' operation, so that we can later turn skb->mac.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Several functions are marked inline or forced inline, but it would be better to let the compiler decide. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We currently use a special structure (struct skb_timeval) and plain 'struct timeval' to store packet timestamps in sk_buffs and struct sock. This has some drawbacks : - Fixed resolution of micro second. - Waste of space on 64bit platforms where sizeof(struct timeval)=16 I suggest using ktime_t that is a nice abstraction of high resolution time services, currently capable of nanosecond resolution. As sizeof(ktime_t) is 8 bytes, using ktime_t in 'struct sock' permits a 8 byte shrink of this structure on 64bit architectures. Some other structures also benefit from this size reduction (struct ipq in ipv4/ip_fragment.c, struct frag_queue in ipv6/reassembly.c, ...) Once this ktime infrastructure adopted, we can more easily provide nanosecond resolution on top of it. (ioctl SIOCGSTAMPNS and/or SO_TIMESTAMPNS/SCM_TIMESTAMPNS) Note : this patch includes a bug correction in compat_sock_get_timestamp() where a "err = 0;" was missing (so this syscall returned -ENOENT instead of 0) Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> CC: Stephen Hemminger <shemminger@linux-foundation.org> CC: John find <linux.kernel@free.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 4月, 2007 1 次提交
-
-
由 Eric W. Biederman 提交于
The generic networking code ensures that no two networking devices have the same name, so there is no time except when sysfs has implementation bugs that device_rename when called from dev_change_name will fail. The current error handling for errors from device_rename in dev_change_name is wrong and results in an unusable and unrecoverable network device if device_rename is happens to return an error. This patch removes the buggy error handling. Which confines the mess when device_rename hits a problem to sysfs, instead of propagating it the rest of the network stack. Making linux a little more robust. Without this patch you can observe what happens when sysfs has a bug when CONFIG_SYSFS_DEPRECATED is not set and you attempt to rename a real network device to a name like (broken_parity_status, device, modalias, power, resource2, subsystem_vendor, class, driver, irq, msi_bus, resource, subsystem, uevent, config, enable, local_cpus, numa_node, resource0, subsystem_device, vendor) Greg has a patch that fixes the sysfs bugs but he doesn't trust it for a 2.6.21 timeframe. This patch which just ignores errors should be safe and it keeps the system from going completely wacky. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 3月, 2007 1 次提交
-
-
由 Patrick McHardy 提交于
The input_device pointer is not refcounted, which means the device may disappear while packets are queued, causing a crash when ifb passes packets with a stale skb->dev pointer to netif_rx(). Fix by storing the interface index instead and do a lookup where neccessary. Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 3月, 2007 1 次提交
-
-
由 Patrick McHardy 提交于
Ingress queueing uses a seperate lock for serializing enqueue operations, but fails to properly protect itself against concurrent changes to the qdisc tree. Use queue_lock for now since the real fix it quite intrusive. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 2月, 2007 1 次提交
-
-
由 Arjan van de Ven 提交于
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 2月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2007 1 次提交
-
-
由 Stephen Hemminger 提交于
There was no real useful information from the unregister_netdevice() return code, the only error occurred in a situation that was a driver bug. So change it to a void function. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 2月, 2007 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This lets the network core have the ability to handle suspend/resume issues, if it wants to. Thanks to Frederik Deweerdt <frederik.deweerdt@gmail.com> for the arm driver fixes. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 08 12月, 2006 1 次提交
-
-
由 Ingo Molnar 提交于
There was lots of #ifdef noise in the kernel due to hotcpu_notifier(fn, prio) not correctly marking 'fn' as used in the !HOTPLUG_CPU case, and thus generating compiler warnings of unused symbols, hence forcing people to add #ifdefs. the compiler can skip truly unused functions just fine: text data bss dec hex filename 1624412 728710 3674856 6027978 5bfaca vmlinux.before 1624412 728710 3674856 6027978 5bfaca vmlinux.after [akpm@osdl.org: topology.c fix] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 03 12月, 2006 4 次提交
-
-
由 Al Viro 提交于
... into anonymous union of __wsum and __u32 (csum and csum_offset resp.) Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
This patch contains the scheduled removal of the frame diverter. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 12月, 2006 1 次提交
-
-
由 Stephen Hemminger 提交于
This bit of old backwards compatibility cruft can be removed in 2.6.20. If there is still an device that calls register_netdev() with a zero or blank name, it will get -EINVAL from register_netdevice(). Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-