Currently swsusp saves the contents of highmem pages by copying them to the
normal zone which is quite inefficient (eg.  it requires two normal pages
to be used for saving one highmem page).  This may be improved by using
highmem for saving the contents of saveable highmem pages.

Namely, during the suspend phase of the suspend-resume cycle we try to
allocate as many free highmem pages as there are saveable highmem pages.
If there are not enough highmem image pages to store the contents of all of
the saveable highmem pages, some of them will be stored in the "normal"
memory.  Next, we allocate as many free "normal" pages as needed to store
the (remaining) image data.  We use a memory bitmap to mark the allocated
free pages (ie.  highmem as well as "normal" image pages).

Now, we use another memory bitmap to mark all of the saveable pages
(highmem as well as "normal") and the contents of the saveable pages are
copied into the image pages.  Then, the second bitmap is used to save the
pfns corresponding to the saveable pages and the first one is used to save
their data.

During the resume phase the pfns of the pages that were saveable during the
suspend are loaded from the image and used to mark the "unsafe" page
frames.  Next, we try to allocate as many free highmem page frames as to
load all of the image data that had been in the highmem before the suspend
and we allocate so many free "normal" page frames that the total number of
allocated free pages (highmem and "normal") is equal to the size of the
image.  While doing this we have to make sure that there will be some extra
free "normal" and "safe" page frames for two lists of PBEs constructed
later.

Now, the image data are loaded, if possible, into their "original" page
frames.  The image data that cannot be written into their "original" page
frames are loaded into "safe" page frames and their "original" kernel
virtual addresses, as well as the addresses of the "safe" pages containing
their copies, are stored in one of two lists of PBEs.

One list of PBEs is for the copies of "normal" suspend pages (ie.  "normal"
pages that were saveable during the suspend) and it is used in the same way
as previously (ie.  by the architecture-dependent parts of swsusp).  The
other list of PBEs is for the copies of highmem suspend pages.  The pages
in this list are restored (in a reversible way) right before the
arch-dependent code is called.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make swsusp use memory bitmaps to store its internal information during the
resume phase of the suspend-resume cycle.

If the pfns of saveable pages are saved during the suspend phase instead of
the kernel virtual addresses of these pages, we can use them during the resume
phase directly to set the corresponding bits in a memory bitmap.  Then, this
bitmap is used to mark the page frames corresponding to the pages that were
saveable before the suspend (aka "unsafe" page frames).

Next, we allocate as many page frames as needed to store the entire suspend
image and make sure that there will be some extra free "safe" page frames for
the list of PBEs constructed later.  Subsequently, the image is loaded and, if
possible, the data loaded from it are written into their "original" page
frames (ie.  the ones they had occupied before the suspend).

The image data that cannot be written into their "original" page frames are
loaded into "safe" page frames and their "original" kernel virtual addresses,
as well as the addresses of the "safe" pages containing their copies, are
stored in a list of PBEs.  Finally, the list of PBEs is used to copy the
remaining image data into their "original" page frames (this is done
atomically, by the architecture-dependent parts of swsusp).
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove some things that are no longer used or defined elsewhere from suspend.h
and make the inline version of software_suspend() return the right error code.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The current suspend code has to be run on one CPU, so we use the CPU
hotplug to take the non-boot CPUs offline on SMP machines.  However, we
should also make sure that these CPUs will not be enabled by someone else
after we have disabled them.

The functions disable_nonboot_cpus() and enable_nonboot_cpus() are moved to
kernel/cpu.c, because they now refer to some stuff in there that should
better be static.  Also it's better if disable_nonboot_cpus() returns an
error instead of panicking if something goes wrong, and
enable_nonboot_cpus() has no reason to panic(), because the CPUs may have
been enabled by the userland before it tries to take them online.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This reverts commits

  3e3318de [PATCH] swsusp: x86_64 mark special saveable/unsaveable pages
  b6370d96 [PATCH] swsusp: i386 mark special saveable/unsaveable pages
  ce4ab001 [PATCH] swsusp: add architecture special saveable pages support

because not only do they apparently cause page faults on x86, the
infrastructure doesn't compile on powerpc.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

1. Add architecture specific pages save/restore support.  Next two patches
   will use this to save/restore 'ACPI NVS' pages.

2. Allow reserved pages 'nosave'.  This could avoid save/restore BIOS
   reserved pages.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Nigel Cunningham <nigel@suspend2.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Fix compilation problem in PM headers.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

kernel/power/power.h:49: error: static declaration of 'pm_prepare_console' follows non-static declaration
include/linux/suspend.h:46: error: previous declaration of 'pm_prepare_console' was here
kernel/power/power.h:50: error: static declaration of 'pm_restore_console' follows non-static declaration
include/linux/suspend.h:47: error: previous declaration of 'pm_restore_console' was here
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch makes swsusp free only as much memory as needed to complete the
suspend and not as much as possible.   In the most of cases this should speed
up the suspend and make the system much more responsive after resume,
especially if a GUI (eg.  X Windows) is used.

If needed, the old behavior (ie to free as much memory as possible during
suspend) can be restored by unsetting FAST_FREE in power.h
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch introduces the swap map structure that can be used by swsusp for
keeping tracks of data pages written to the swap.   The structure itself is
described in a comment within the patch.

The overall idea is to reduce the amount of metadata written to the swap and
to write and read the image pages sequentially, in a file-alike way.  This
makes the swap-handling part of swsusp fairly independent of its
snapshot-handling part and will hopefully allow us to completely separate
these two parts in the future.

This patch is needed to remove the suspend image size limit imposed by the
limited size of the swsusp_info structure, which is essential for x86-64
systems with more than 512 MB of RAM.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following patch makes swsusp use the PG_nosave and PG_nosave_free flags to
mark pages that should be freed in case of an error during resume.

This allows us to simplify the code and to use swsusp_free() in all of the
swsusp's resume error paths, which makes them actually work.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following patch moves the functionality of swsusp related to creating and
handling the snapshot of memory to a separate file, snapshot.c

This should enable us to untangle the code in the future and eventually to
implement some parts of swsusp.c in the user space.

The patch does not change the code.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following patch makes swsusp avoid the possible temporary corruption
of page translation tables during resume on x86-64.  This is achieved by
creating a copy of the relevant page tables that will not be modified by
swsusp and can be safely used by it on resume.

The problem is that during resume on x86-64 swsusp may temporarily
corrupt the page tables used for the direct mapping of RAM.  If that
happens, a page fault occurs and cannot be handled properly, which leads
to the solid hang of the affected system.  This leads to the loss of the
system's state from before suspend and may result in the loss of data or
the corruption of filesystems, so it is a serious issue.  Also, it
appears to happen quite often (for me, as often as 50% of the time).

The problem is related to the fact that (at least) one of the PMD
entries used in the direct memory mapping (starting at PAGE_OFFSET)
points to a page table the physical address of which is much greater
than the physical address of the PMD entry itself.  Moreover,
unfortunately, the physical address of the page table before suspend
(i.e.  the one stored in the suspend image) happens to be different to
the physical address of the corresponding page table used during resume
(i.e.  the one that is valid right before swsusp_arch_resume() in
arch/x86_64/kernel/suspend_asm.S is executed).  Thus while the image is
restored, the "offending" PMD entry gets overwritten, so it does not
point to the right physical address any more (i.e.  there's no page
table at the address pointed to by it, because it points to the address
the page table has been at during suspend).  Consequently, if the PMD
entry is used later on, and it _is_ used in the process of copying the
image pages, a page fault occurs, but it cannot be handled in the normal
way and the system hangs.

In principle we can call create_resume_mapping() from
swsusp_arch_resume() (ie.  from suspend_asm.S), but then the memory
allocations in create_resume_mapping(), resume_pud_mapping(), and
resume_pmd_mapping() must be made carefully so that we use _only_
NosaveFree pages in them (the other pages are overwritten by the loop in
swsusp_arch_resume()).  Additionally, we are in atomic context at that
time, so we cannot use GFP_KERNEL.  Moreover, if one of the allocations
fails, we should free all of the allocated pages, so we need to trace
them somehow.

All of this is done in the appended patch, except that the functions
populating the page tables are located in arch/x86_64/kernel/suspend.c
rather than in init.c.  It may be done in a more elegan way in the
future, with the help of some swsusp patches that are in the works now.

[AK: move some externs into headers, renamed a function]
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Using CPU hotplug to support suspend/resume SMP.  Both S3 and S4 use
disable/enable_nonboot_cpus API.  The S4 part is based on Pavel's original S4
SMP patch.

Signed-off-by: Li Shaohua<shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!