Replace hard-coded waiting loops in sata_sil24 to ata_wait_register().
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Replace ahci_poll_register() with ata_wait_register().
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

As waiting for some register bits to change seems to be a common
operation shared by some controllers, implement helper function
ata_wait_register().  This function also takes care of register write
flushing.

Note that the condition is inverted, the wait is over when the masked
value does NOT match @val.  As we're waiting for bits to change, this
test is more powerful and allows the function to be used in more
places.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Improve softreset error message.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

sil24_softreset calculated timeout by adding ATA_TMOUT_BOOT * HZ to
jiffies; however, as ATA_TMOUT_BOOT is already in jiffies, multiplying
by HZ makes the value way off.  Fix it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Make reset methods complain loud when they fail.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

@verbose was added to ata_reset_fn_t because AHCI complained during
probing if no device was attached to the port.  However, muting
failure message isn't the correct approach.  Reset methods are
responsible for detecting no device condition and finishing
successfully.  Now that AHCI softreset is fixed, kill @verbose.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Make setting CBL type responsibility of probeinit.  This allows using
only ap->cbl == ATA_CBL_SATA test in all other parts.  Without this,
ata_down_sata_spd_limit() doesn't work during probe reset.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Conflicts:

	drivers/scsi/libata-scsi.c
	include/linux/libata.h

Commit e56d0903

   [PATCH] RCU signal handling

made this BUG_ON() unsafe. This code runs under ->siglock,
while switch_exec_pids() takes tasklist_lock.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  kconfig: fix typo in change count initialization
  kconfig: recenter menuconfig
  kconfig: revert conf behaviour change
  kconfig: fix default value for choice input
  kbuild: fix NULL dereference in scripts/mod/modpost.c
  kbuild: fix mode of checkstack.pl and other files.
  kbuild: rebuild initramfs if content of initramfs changes
  kbuild: properly pass options to hostcc when doing make O=..
  kbuild: modules_install for external modules must not remove existing modules
  kbuild: fix make dir/
  ver_linux: don't print reiser4progs version if none found
  kbuild: mips: fix sed regexp to generate asm-offset.h
  kbuild: fix building single targets with make O=.. single-target
  kbuild: use relative path to -I
  kbuild: fix unneeded rebuilds in drivers/net/chelsio after moving source tree
  kbuild: fix unneeded rebuilds in drivers/media/video after moving source tree
  kbuild: fix garbled text in modules.txt

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Prefetch mmap_sem in ia64_do_page_fault()
  [IA64] Failure to resume after INIT in user space
  [IA64] Pass more data to the MCA/INIT notify_die hooks
  [IA64] always map VGA framebuffer UC, even if it supports WB
  [IA64] fix bug in ia64 __mutex_fastpath_trylock
  [IA64] for_each_possible_cpu: ia64
  [IA64] update HP CSR space discovery via ACPI
  [IA64] Wire up new syscalls {set,get}_robust_list
  [IA64] 'msg' may be used uninitialized in xpc_initiate_allocate()
  [IA64] Wire up new syscall sync_file_range()

In vsyscall function do_vgettimeofday(), some functions are declared as
inlined, which is a hint for gcc to compile the function inlined but it
not forced.  Sometimes compiler does not compile the function as
inlined, so here inline is replaced by __always_inline prefix.

It does not happen in gcc compiler actually, but it possibly happens.
Signed-off-by: Nbibo mao <bibo.mao@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Surprising that it still worked at all with this - yes it was
tested.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Nobody should pass NULL here. Could in theory make it a BUG,
but the NULL pointer oops will do as well.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It's not actually needed and would break non power of two number
of cores.

Follows similar earlier x86-64 patch.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Commit c818a181 didn't do the expected
thing.  This fix will remove the additional sync(cpuid) before RDTSC on
Intel platforms..
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As pointed out by Linus it is useless now because entry.S should
handle it correctly in all cases.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When nolapic was passed or the local APIC was disabled
for another reason ACPI would still parse the IO-APICs
until these were explicitely disabled with noapic.

Usually this resulted in a non booting configuration unless
"nolapic noapic" was used.

I also disabled the local APIC parsing in this case, although
that's only cosmetic (suppresses a few printks)

This hopefully makes nolapic work in all cases.

Cc: Len Brown <len.brown@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] vfs: add splice_write and splice_read to documentation
  [PATCH] Remove sys_ prefix of new syscalls from __NR_sys_*
  [PATCH] splice: warning fix
  [PATCH] another round of fs/pipe.c cleanups
  [PATCH] splice: comment styles
  [PATCH] splice: add Ingo as addition copyright holder
  [PATCH] splice: unlikely() optimizations
  [PATCH] splice: speedups and optimizations
  [PATCH] pipe.c/fifo.c code cleanups
  [PATCH] get rid of the PIPE_*() macros
  [PATCH] splice: speedup __generic_file_splice_read
  [PATCH] splice: add direct fd <-> fd splicing support
  [PATCH] splice: add optional input and output offsets
  [PATCH] introduce a "kernel-internal pipe object" abstraction
  [PATCH] splice: be smarter about calling do_page_cache_readahead()
  [PATCH] splice: optimize the splice buffer mapping
  [PATCH] splice: cleanup __generic_file_splice_read()
  [PATCH] splice: only call wake_up_interruptible() when we really have to
  [PATCH] splice: potential !page dereference
  [PATCH] splice: mark the io page as accessed

Since the arrays are declared as in_urbs[N_IN_URB]
and out_urbs[N_OUT_URB], both for loops go one
over the end of the array. This fixes coverity id #555.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-Off-By: NMatthias Urlichs <smurf@smurf.noris.de>
Signed-Off-By: NLinus Torvalds <torvalds@osdl.org>

Since the visual STATIC_PSEUDOCOLOR has a read-only colormap, use logos
with 16 colors only since these logos use the console palette.  This has a
higher likelihood that the logo will display correctly.
Signed-of-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Bugzilla Bug 6299:

A pixel size of 8 bits produces wrong logo colors in x86_64.

The driver has 2 methods for setting the color map, using the protected
mode interface provided by the video BIOS and directly writing to the VGA
registers.  The former is not supported in x86_64 and the latter is enabled
only in i386.

Fix by enabling the latter method in x86_64 only if supported by the BIOS.
If both methods are unsupported, change the visual of vesafb to
STATIC_PSEUDOCOLOR.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sparc32 lacks vga.h, so lots of fbdev drivers won't compile.  There are no
sparc32 systems with PCI slots, so it's a bit moot.

The patch gives sparc32 a copy of the sparc64 vga.h.  It fixes sparc32
allmodconfig without mucking up fbdev Kconfig and gives us wider compile
coverage.

Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: N"David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Heaps of build errors - disable it to keep sparc32 allmodconfig happy.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix an obvious of-by-one error spotted by the Coverity checker.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Keep unused openowners around for at least one lease period, to avoid the need
for as many open confirmations and to allow handing out more delegations.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It's very easy for the server to DOS itself by just giving out too many
delegations.

For now we just solve the problem with a dumb hard limit.  Eventually we'll
want a smarter policy.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We should be shutting down rpciod for the callback channel when we shut down
the server.

Also note that we do rpciod_up() and create the callback client *before*
setting cb_set--the cb_set only determines whether the initial null was
succesful.  So cb_set is not a reliable determiner of whether we need to clean
up, only cb_client is.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some obvious cleanup.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We need to make sure the laundromat work doesn't reschedule itself just when
we try to cancel it.  Also, we shouldn't be waiting for it to finish running
while holding the state lock, as that's a potential deadlock.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Every caller of svc_take_page ignores its return value and assumes it
succeeded.  So just WARN() instead of returning an ignored error.  This would
have saved some time debugging a recent nfsd4 problem.

If there are still failure cases here, then the result is probably that we
overwrite an earlier part of the reply while xdr-encoding.

While the corrupted reply is a nasty bug, it would be worse to panic here and
create the possibility of a remote DOS; hence WARN() instead of BUG().
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: Ingo Oeser <ioe-lkml@rameria.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We're using svc_take_page here to get another page for the tail in case one
wasn't already allocated.  But there isn't always guaranteed to be another
page available.

Also fix a typo that made us check the tail buffer for space when we meant to
be checking the head buffer.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix corruption on readdir encoding with 64k pages.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In v4 we grab an extra page just for the padding of returned data.  The
formula that the rpc server uses to allocate pages for the response doesn't
take into account this extra page.

Instead of adjusting those formulae, we adopt the same solution as v2 and v3,
and put the "tail" data in the same page as the "head" data.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since nfsd_setuser() is already called from any operation that uses the
current filehandle (because it's called from fh_verify), there's no reason to
call it from putrootfh.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In addition to setting the processes filesystem id's, nfsd_setuser also
modifies the value of the rq_cred which stores the id's that originally came
from the rpc call, for example to reflect root squashing.

There's no real reason to do that--the only case where rqstp->rq_cred is
actually used later on is in the NFSv4 SETCLIENTID/SETCLIENTID_CONFIRM
operations, and there the results are the opposite of what we want--those two
operations don't deal with the filesystem at all, they only record the
credentials used with the rpc call for later reference (so that we may require
the same credentials be used on later operations), and the credentials
shouldn't vary just because there was or wasn't a previous operation in the
compound that referred to some export

This fixes a bug which caused mounts from Solaris clients to fail.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Export a directory that does not exist:
	exportfs -orw,fsid=0,insecure,no_subtree_check client:/home/NFS4

Try to mount from client with nfs4. Mount hangs (I'm not sure why -
that's another issue).

While client is hung, back on server

	mkdir /home/NFS4

The server panics in dput.  I traced the problem back to svc_export_parse()
calling path_release() even though path_lookup() failed (it happens to fill in
the nameidata structure with a negative dentry - so the test after out:
succeeds).

After patching, an recreating the problem, the client mount still takes some
time before finally exiting with a message "couldn't read superblock".

Here is a simple patch to resolve this issue:
Signed-off-by: NFrank Filz <ffilzlnx@us.ibm.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>