Mainline commit d4f7e650 attempts to delay
the dlm_thread from sending the drop ref message if the lockres is being
migrated. The problem is that we make the dlm_thread wait for the migration
to complete. This causes a deadlock as dlm_thread also participates in the
lockres migration process.

A better fix for the original oss bugzilla#1012 is in testing.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Acked-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

In __ocfs2_mark_extent_written, when we meet with the situation
of c_split_covers_rec, the old solution just replace the extent
record and forget to access and dirty the buffer_head. This will
cause a problem when the unwritten extent is in an extent block.
So access and dirty it.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: try committing transaction before returning ENOSPC
  Btrfs: add better -ENOSPC handling

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  xen/blkfront: use blk_rq_map_sg to generate ring entries
  block: reduce stack footprint of blk_recount_segments()
  cciss: shorten 30s timeout on controller reset
  block: add documentation for register_blkdev()
  block: fix bogus gcc warning for uninitialized var usage

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix 64bit __copy_tofrom_user() regression
  powerpc: Fix 64bit memcpy() regression
  powerpc: Fix load/store float double alignment handler

It needs to happen before any firewire driver actually registers itself,
and that was previously handled by having the Makefile list the core
ieee1394 files before the drivers.

But now there are firewire drivers in drivers/media, and the Makefile
games aren't enough.  So just make ieee1394_init happen earlier in the
init sequence, the way all other bus layers already do.
Reported-and-tested-by: NIngo Molnar <mingo@elte.hu>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Henrik Kurelid <henrik@kurelid.se>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Ben Backx <ben@bbackx.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On occasion, the request will apparently have more segments than we
fit into the ring. Jens says:

> The second problem is that the block layer then appears to create one
> too many segments, but from the dump it has rq->nr_phys_segments ==
> BLKIF_MAX_SEGMENTS_PER_REQUEST. I suspect the latter is due to
> xen-blkfront not handling the merging on its own. It should check that
> the new page doesn't form part of the previous page. The
> rq_for_each_segment() iterates all single bits in the request, not dma
> segments. The "easiest" way to do this is to call blk_rq_map_sg() and
> then iterate the mapped sg list. That will give you what you are
> looking for.

> Here's a test patch, compiles but otherwise untested. I spent more
> time figuring out how to enable XEN than to code it up, so YMMV!
> Probably the sg list wants to be put inside the ring and only
> initialized on allocation, then you can get rid of the sg on stack and
> sg_init_table() loop call in the function. I'll leave that, and the
> testing, to you.

[Moved sg array into info structure, and initialize once. -J]
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

blk_recalc_rq_segments() requires a request structure passed in, which
we don't have from blk_recount_segments(). So the latter allocates one on
the stack, using > 400 bytes of stack for that. This can cause us to spill
over one page of stack from ext4 at least:

 0)     4560     400   blk_recount_segments+0x43/0x62
 1)     4160      32   bio_phys_segments+0x1c/0x24
 2)     4128      32   blk_rq_bio_prep+0x2a/0xf9
 3)     4096      32   init_request_from_bio+0xf9/0xfe
 4)     4064     112   __make_request+0x33c/0x3f6
 5)     3952     144   generic_make_request+0x2d1/0x321
 6)     3808      64   submit_bio+0xb9/0xc3
 7)     3744      48   submit_bh+0xea/0x10e
 8)     3696     368   ext4_mb_init_cache+0x257/0xa6a [ext4]
 9)     3328     288   ext4_mb_regular_allocator+0x421/0xcd9 [ext4]
10)     3040     160   ext4_mb_new_blocks+0x211/0x4b4 [ext4]
11)     2880     336   ext4_ext_get_blocks+0xb61/0xd45 [ext4]
12)     2544      96   ext4_get_blocks_wrap+0xf2/0x200 [ext4]
13)     2448      80   ext4_da_get_block_write+0x6e/0x16b [ext4]
14)     2368     352   mpage_da_map_blocks+0x7e/0x4b3 [ext4]
15)     2016     352   ext4_da_writepages+0x2ce/0x43c [ext4]
16)     1664      32   do_writepages+0x2d/0x3c
17)     1632     144   __writeback_single_inode+0x162/0x2cd
18)     1488      96   generic_sync_sb_inodes+0x1e3/0x32b
19)     1392      16   sync_sb_inodes+0xe/0x10
20)     1376      48   writeback_inodes+0x69/0xb3
21)     1328     208   balance_dirty_pages_ratelimited_nr+0x187/0x2f9
22)     1120     224   generic_file_buffered_write+0x1d4/0x2c4
23)      896     176   __generic_file_aio_write_nolock+0x35f/0x393
24)      720      80   generic_file_aio_write+0x6c/0xc8
25)      640      80   ext4_file_write+0xa9/0x137 [ext4]
26)      560     320   do_sync_write+0xf0/0x137
27)      240      48   vfs_write+0xb3/0x13c
28)      192      64   sys_write+0x4c/0x74
29)      128     128   system_call_fastpath+0x16/0x1b

Split the segment counting out into a __blk_recalc_rq_segments() helper
to avoid allocating an onstack request just for checking the physical
segment count.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

If reset_devices is set for kexec, then cciss will delay 30 seconds
since the old 5i controller _may_ need that long to recover. Replace
the long sleep with incremental sleep and tests to reduce the 30 seconds
to worst case for 5i, so that other controllers will proceed quickly.
Reviewed-by: NMike Miller <mike.miller@hp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Add documentation for register_blkdev() function and for the parameters.
Signed-off-by: NMárton Németh <nm127@freemail.hu>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Newer gcc throw this warning:

        fs/bio.c: In function ?bio_alloc_bioset?:
        fs/bio.c:305: warning: ?p? may be used uninitialized in this function

since it cannot figure out that 'p' is only ever used if 'bs' is non-NULL.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This fixes a regression introduced by commit
a4e22f02 ("powerpc: Update 64bit
__copy_tofrom_user() using CPU_FTR_UNALIGNED_LD_STD").

The same bug that existed in the 64bit memcpy() also exists here so fix
it here too. The fix is the same as that applied to memcpy() with the
addition of fixes for the exception handling code required for
__copy_tofrom_user().

This stops us reading beyond the end of the source region we were told
to copy.
Signed-off-by: NMark Nelson <markn@au1.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This fixes a regression introduced by commit
25d6e2d7 ("powerpc: Update 64bit memcpy()
using CPU_FTR_UNALIGNED_LD_STD").

This commit allowed CPUs that have the CPU_FTR_UNALIGNED_LD_STD CPU
feature bit present to do the memcpy() with unaligned load doubles. But,
along with this came a bug where our final load double would read bytes
beyond a page boundary and into the next (unmapped) page. This was caught
by enabling CONFIG_DEBUG_PAGEALLOC,

The fix was to read only the number of bytes that we need to store rather
than reading a full 8-byte doubleword and storing only a portion of that.

In order to minimise the amount of existing code touched we use the
original do_tail for the src_unaligned case.

Below is an example of the regression, as reported by Sachin Sant:

Unable to handle kernel paging request for data at address 0xc00000003f380000
Faulting instruction address: 0xc000000000039574
cpu 0x1: Vector: 300 (Data Access) at [c00000003baf3020]
    pc: c000000000039574: .memcpy+0x74/0x244
    lr: d00000000244916c: .ext3_xattr_get+0x288/0x2f4 [ext3]
    sp: c00000003baf32a0
   msr: 8000000000009032
   dar: c00000003f380000
 dsisr: 40000000
  current = 0xc00000003e54b010
  paca    = 0xc000000000a53680
    pid   = 1840, comm = readahead
enter ? for help
[link register   ] d00000000244916c .ext3_xattr_get+0x288/0x2f4 [ext3]
[c00000003baf32a0] d000000002449104 .ext3_xattr_get+0x220/0x2f4 [ext3]
(unreliab
le)
[c00000003baf3390] d00000000244a6e8 .ext3_xattr_security_get+0x40/0x5c [ext3]
[c00000003baf3400] c000000000148154 .generic_getxattr+0x74/0x9c
[c00000003baf34a0] c000000000333400 .inode_doinit_with_dentry+0x1c4/0x678
[c00000003baf3560] c00000000032c6b0 .security_d_instantiate+0x50/0x68
[c00000003baf35e0] c00000000013c818 .d_instantiate+0x78/0x9c
[c00000003baf3680] c00000000013ced0 .d_splice_alias+0xf0/0x120
[c00000003baf3720] d00000000243e05c .ext3_lookup+0xec/0x134 [ext3]
[c00000003baf37c0] c000000000131e74 .do_lookup+0x110/0x260
[c00000003baf3880] c000000000134ed0 .__link_path_walk+0xa98/0x1010
[c00000003baf3970] c0000000001354a0 .path_walk+0x58/0xc4
[c00000003baf3a20] c000000000135720 .do_path_lookup+0x138/0x1e4
[c00000003baf3ad0] c00000000013645c .path_lookup_open+0x6c/0xc8
[c00000003baf3b70] c000000000136780 .do_filp_open+0xcc/0x874
[c00000003baf3d10] c0000000001251e0 .do_sys_open+0x80/0x140
[c00000003baf3dc0] c00000000016aaec .compat_sys_open+0x24/0x38
[c00000003baf3e30] c00000000000855c syscall_exit+0x0/0x40
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When we introduced VSX, we changed the way FPRs are stored in the
thread_struct.  Unfortunately we missed the load/store float double
alignment handler code when updating how we access FPRs in the
thread_struct.

Below fixes this and merges the little/big endian case.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: emu10k1 - Fix digital/analog switch on audigy2 ZS
  ALSA: hda - Quirk for Acer Aspire 6530G
  ALSA: hda - add another MacBook Pro 3,1 SSID
  ALSA: fix excessive background noise introduced by OSS emulation rate shrink
  ALSA: aw2: do not grab every saa7146 based device
  ALSA: hda - Fix parse of init_verbs sysfs entry
  ALSA: pcxhr.h replace signed one-bit bitfields

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Don't go beyond iosapic_intr_info's arraysize
  [IA64] Do not go beyond ARRAY_SIZE of unw.hash
  [IA64] enable setting DMAR on by default

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] pata_legacy: for VLB 32bit PIO don't try tricks with slop
  [libata] pata_amd: program FIFO
  sata_mv: fix SoC interrupt breakage
  pata_it821x: resume from hibernation fails with RAID volume

These devices are generally used with ATA anyway and it seems that some
ATAPI will need us to issue the right number of words.  Therefore as we
can't switch mid burst on VLB devices we should only use 32bit I/O for
suitable block sizes.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

With 32bit PIO we can use the posted write buffers, but only for 32bit I/O
cycles.  This means we must disable the FIFO for ATAPI where a final 16bit
cycle may occur.

Rework the FIFO logic so that we disable the FIFO then selectively
re-enable it when we set the timings on AMD devices.  Also fix a case
where we scribbled on PCI config 0x41 of Nvidia chips when we shouldn't.
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

For some reason, sata_mv doesn't clear interrupt status during init
when it's running on an SoC host adapter.  If the bootloader has
touched the SATA controller before starting Linux, Linux can end up
enabling the SATA interrupt with events pending, which will cause the
interrupt to be marked as spurious and then be disabled, which then
breaks all further accesses to the controller.

This patch makes the SoC path clear interrupt status on init like in
the non-SoC case.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NMark Lord <mlord@pobox.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Hibernation didn't work for me since I started to use IT8212 controller.
I did some debugging (booting with no_console_suspend init=/bin/sh).

Found that resume fails (2.6.28) with "serial number mismatch 'some
garbage' != 'some other garbage'" and "revalidation failed" messages.
That's because the controller firmware fills different serial number in
the IDENTIFY every boot.

The patch below fixes the resume simply clearing the serial number.  The
proper fix would be probably to fill in the serial number of the RAID
volume instead.  I assume that there must be something like that stored on
the drives but I don't know where.

Fix resume on pata_it821x RAID volume by clearing the serial number in
IDENTIFY data, which is otherwise different on each boot.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: fix refcounting in device drivers
  ide-cd: document capacity hack
  it821x: remove dead URL
  atiixp: fix missing parentheses
  amd74xx: device/vendor confusion
  ide: ide.c 'clear' fix, update "ide=nodma" documentation

Each time I exit Firefox, /proc/meminfo's Committed_AS goes down almost
400 kB: OVERCOMMIT_NEVER would be allowing overcommits it should
prohibit.

Commit fc8744ad "Stop playing silly
games with the VM_ACCOUNT flag" changed shmem_file_setup() to set the
shmem file's VM_ACCOUNT flag according to VM_NORESERVE not being set in
the vma flags; but did so only _after_ the shmem_acct_size(flags, size)
call which is expected to pre-account a shared anonymous object.

It's all clearer if we switch shmem.c over to use VM_NORESERVE
throughout in place of !VM_ACCOUNT.

But I very nearly sent in a patch which mistakenly removed the
accounting from tmpfs files: shmem_get_inode()'s memset was good for not
setting VM_ACCOUNT, but now it needs to set VM_NORESERVE.

Rather than setting that by default, then perhaps clearing it again in
shmem_file_setup(), let's pass it as a flag to shmem_get_inode(): that
allows us to remove the #ifdef CONFIG_SHMEM from shmem_file_setup().
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vi arch/ia64/kernel/iosapic.c +142
static struct iosapic_intr_info {
	...
} iosapic_intr_info[NR_IRQS];

But at line 510 we have:
	for (i = 0; i <= NR_IRQS; i++) {

s/<=/</
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

static struct {

... :114
        unsigned short hash[UNW_HASH_SIZE];

... :2152
	for (index = 0; index <= UNW_HASH_SIZE; ++index) {

This is a bug, isn't it?

s/<=/</
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The previous commit which introduced the DMAR_DEFAULT_ON setting in
drivers/pci/dmar.c neglected to add the ability for ia64 to enable
the IOMMU by default. Rectify that mistake, doh!
Signed-off-by: NKyle McMartin <kyle@redhat.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

During host driver module removal del_gendisk() results in a final
put on drive->gendev and freeing the drive by drive_release_dev().

Convert device drivers from using struct kref to use struct device
so device driver's object holds reference on ->gendev and prevents
drive from prematurely going away.

Also fix ->remove methods to not erroneously drop reference on a
host driver by using only put_device() instead of ide*_put().
Reported-by: NStanislaw Gruszka <stf_xl@wp.pl>
Tested-by: NStanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Just copy the comment from drivers/scsi/sr.c::sr_done()
(from which the capacity hack has been originated).

Cc: Borislav Petkov <petkovbb@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix missing parentheses so PIO/DMA timings for master device on the
second channel are programmed correctly (IOW "8 0 24 16" offset values
should be used instead of the current "8 0 16 16").

[ The bug went unnoticed because after PIO/DMA timings get programmed
  incorrectly for the third device they are overwritten with timings
  for the fourth device and since BIOS should also program timings for
  the third device everything should work fine until suspend/resume
  cycle or user requested transfer mode changes. ]
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
[bart: update patch description]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Device and vendor ids were confused
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Documentation/kernel-parameters.txt
- ide=nodma is no longer valid.

drivers/ide/Kconfig
- The module is ide-core.ko not ide.

drivers/ide/ide.c
- It took me a while to figure out what the arguments %d.%d:%d to nodma
  module parameter ment, so I added a comment to each.
- Added a comment to each of the sscanf lines.
- There is a bug, if j is 0 it would previously clear all the other bits
  except the current device, changed in three different places.
  mask &= (1 << i) should be mask &= ~(1 << i).
Signed-off-by: NDavid Fries <david@fries.net>
[bart: s/disk/device/ in ide.c, beautify patch description]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: convert DRM_ERROR to DRM_DEBUG in phys object pwrite path
  drm/i915: make hw page ioremap use ioremap_wc
  drm: edid revision 0 is valid
  drm: Correct unbalanced drm_vblank_put() during mode setting.
  drm: disable encoders before re-routing them
  drm: Fix ordering of bit fields in EDID structure leading huge vsync values.
  drm: Fix shifts of EDID vsync offset/width fields.
  drm/i915: handle bogus VBT panel timing
  drm/i915: remove PLL debugging messages

* 'for-linus' of git://neil.brown.name/md:
  md: avoid races when stopping resync.
  md/raid10:  Don't call bitmap_cond_end_sync when we are doing recovery.
  md/raid10:  Don't skip more than 1 bitmap-chunk at a time during recovery.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix crashes in jbusmc_print_dimm()

* git://git.infradead.org/iommu-2.6:
  intel-iommu: fix endless "Unknown DMAR structure type" loop
  VT-d: handle Invalidation Queue Error to avoid system hang
  intel-iommu: fix build error with INTR_REMAP=y and DMAR=n

When iwlan runs on IOMMU, IOMMU generates a lot of PTE write faults
because PTE write bit is not set on some of PTE's.  This is because
iwlan driver calls DMA mapping with PCI_DMA_TODEVICE which is read only
in mapping PTE.  But iwlan device actually writes to the mapped page to
update its contents.  This issue is not exposed in swiotlb.  But VT-d
hardware can capture this fault and stop the fault transaction.

The following patch fixes the issue.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Reviewed-by: NBhavesh Davda <bhavesh@vmware.com>
Tested-by: NChris Wright <chrisw@sous-sol.org>
Acked-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This snuck in when I wrote phys object support.
Signed-off-by: NDave Airlie <airlied@redhat.com>