Move ipack header files to include/linux/ directory where they belong.
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The ipack subsystem is cleaned up enough to now move out of the staging
tree, and into drivers/ipack.

Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Cc: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adapt the copyright clause to CERN guidelines, as it has the copyright over
them.
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert to MT-B because Synaptics touch devices are capable
of tracking identifiable fingers.
Signed-off-by: NAlexandra Chin <alexandra.chin@tw.synaptics.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The code is checkpatch clean, and the logic and flow looks good to me,
so I don't think there's anything left to do here.

Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Cc: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

as CONFIG_HOTPLUG is always enabled now, just remove the #ifdef logic in
the ipack core for it if was disabled.

Cc:Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Cc: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

with the last detached port state file remaining, usbip reports error on
attaching. So clean up the state files on detaching.
Signed-off-by: NHarvey Yang <harvey.huawei.yang@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Inspect the return value of register_netdev() in the driver probe routine and
return -ENODEV in case of error.
Signed-off-by: NKumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new helpers in the step 3 tests of {ai,ao}_cmdtest().
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Inspect the return value of register_netdev() in the driver probe routine and
return -ENODEV in case of error.
Signed-off-by: NKumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following errors and warnings fixed.
- ERROR: code indent should use tabs where possible
- WARNING: please, no spaces at the start of a line
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warning fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warning fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following error fixed.
- ERROR: "foo ** bar" should be "foo **bar"
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following errors fixed.
- ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following errors fixed.
- ERROR: space prohibited after that '!' (ctx:BxW)
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warnings fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following error fixed.
- ERROR: "foo ** bar" should be "foo **bar"
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warnings fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warnings fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warnings fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following errors fixed.
- ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warnings fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warning fixed.
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following error fixed.
- ERROR: do not initialise statics to 0 or NULL
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The following warnings fixed.
- WARNING: braces {} are not necessary for any arm of this statement
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: NYAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_LINE6_USB_DUMP_MIDI is no longer used by the code and therefore
no longer plays a role in CONFIG_LINE6_USB_DUMP_ANY.
Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA amidi(1) and aseqdump(1) can be used to dump MIDI instead of
manually dumping MIDI messages in the driver.  The advantage of using
these existing tools is that can be used at run-time rather than
compile-time.
Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_LINE6_USB_DUMP_CTRL is no longer used by the code and therefore
no longer plays a role in CONFIG_LINE6_USB_DUMP_ANY.
Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The usbmon feature should be used instead of manually dumping control
URBs.  There are a few advantages to using usbmon:

 * Can be turned on/off at runtime
 * Provides full USB-level traffic
 * tcpdump and wireshark support for powerful analysis
 * No driver-specific code is required
Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The TIOCGSOFTCAR and TIOCSSOFTCAR ioctls are handled by the tty layer
so the dgrp driver shouldn't try to deal with them itself.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Apart from the somewhat unnecessary `BUG_ON()` calls,
`comedi_pci_auto_config()` and `comedi_usb_auto_config()` are just
one-line wrappers around `comedi_auto_config()`, and
`comedi_pci_auto_unconfig()` and `comedi_usb_auto_unconfig()` are just
one-line wrappers around `comedi_auto_unconfig()`.  Convert them to
inline functions and remove the `BUG_ON()` calls.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

No comedi drivers set the `attach_pci()` or `attach_usb()` handlers in
their `struct comedi_driver` any longer as they have all been replaced
with an `auto_attach()` handler.  Also, no code calls the `attach_pci()`
or `attach_usb()` handlers any longer.  Remove them from `struct
comedi_driver`.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

`comedi_auto_config()` just calls internal function
`comedi_auto_config_helper()`, passing it a wrapper function
`comedi_auto_config_wrapper()` to handle the specifics of checking and
calling the low-level comedi driver's `auto_attach()` handler.

Since there are no other callers of `comedi_auto_config_helper()` or
`comedi_auto_config_wrapper()`, combine everything into the single
exported function `comedi_auto_config()`.

Change the ordering of the check for existence of the low-level comedi
driver's `auto_attach()` handler and the allocation of the comedi minor
device number.  This means the log message warning of the absence of the
handler now has to be refer to the hardware device instead of the
not-yet-allocated comedi device.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need for `comedi_pci_auto_config()` and
`comedi_usb_auto_config()` to check that `driver->auto_attach` is
non-null before calling `comedi_auto_attach()` as this check is done by
`comedi_auto_config()` itself (actually by
`comedi_auto_config_wrapper()`).  Remove the unnecessary checks.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

All the Comedi drivers that call `comedi_usb_auto_config()` have
replaced the `attach_usb()` handler in their `struct comedi_driver` with
a `auto_attach()` handler, so there is no need to check for the
existence of the `attach_usb()` handler any more.  Remove this check and
the code that calls it.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

All the Comedi drivers that call `comedi_pci_auto_config()` have
replaced the `attach_pci()` handler in their `struct comedi_driver` with
a `auto_attach()` handler, so there is no need to check for the
existence of the `attach_pci()` handler any more.  Remove this check and
the code that calls it.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>