This patch adds support for HMC resource and profile cmds for X722
firmware.

Change-ID: Icc332101f38ab15d1bfa167823100eb4f6822f7e
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes byte ordering problems found when enabling this feature
support. Without this patch, the feature will not work correctly. This
patch fixes the definitions to have the correct byte order.

Change-ID: Ic7489fbcbe2195df7be62ff5e359201b827cefe6
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch refactors tail bump check.

Change-ID: Ide0e19171d67d90cb2b06b8dcd4fa791ae120160
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The PF driver tells us the link speed, so do something with that
information. Add link speed to log messages, and report speed through
ethtool.

Change-Id: I279dc9540cc5203376406050a3e8d67e128d5882
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Replace calls to create_singlethread_workqueue instead with alloc_workqueue
as is style with other Intel drivers. This provides more control over
workqueue creation, and allows explicit setting of the desired mode of
operation. It also makes it more obvious that driver name constant is
passed to a format "%s".

Change-ID: I6192b44caf5140336cd54c5b350d51c73b541fdb
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

A previous refactor added support to store user configuration for VSIs,
so that extra VSIs such as for VMDq can use this information when
configuring. Unfortunately the i40e_vsi_config_rss function was missed
in this refactor, and the values were being ignored. Fix this by
checking for the fields and using those instead of always using the
default values.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

X722 hardware requires using the admin queue to configure RSS. This
function was previously re-written in commit e69ff813 ("i40e: rework
the functions to configure RSS with similar parameters").
However, the previous refactor did not work correctly for a few reasons

(a) it does not check whether seed is NULL before using it, resulting in
a NULL pointer dereference

[  402.954721] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  402.955568] IP: [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e]
[  402.956402] PGD ad610067 PUD accc0067 PMD 0
[  402.957235] Oops: 0000 [#1] SMP
[  402.958064] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_filter ebtable_
broute bridge stp llc ebtable_nat ebtables ip6table_mangle ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv
6 ip6table_security ip6table_filter ip6_tables iptable_mangle iptable_raw iptable_nat nf_conntrack_ipv4_ nf_defrag_ipv4_ nf_nat_ip
v4_ nf_nat nf_conntrack iptable_security intel_rapl i86_kg_temp_thermal coretemp kvm_intel kvm irqbypass crct10dif_clMl crc32_
pclMl ghash_clMlni_intel iTCO_wdt iTCO_vendor_support shpchp sb_edac dcdbas pcspkr joydev ipmi_devintf wmi edac_core ipmi_ssif
 acpi_ad acpi_ower_meter ipmi_si ipmi_msghandler mei_me nfsd lpc_ich mei ioatdma tpm_tis auth_rpcgss tpm nfs_acl lockd grace s
unrpc ifs nngag200 i2c_algo_bit drm_kms_helper ttm drm iigbe bnx2x i40e dca mdio ptp pps_core libcrc32c fjes crc32c_intel
[  402.965563] CPU: 22 PID: 2461 Conm: ethtool Not tainted 4.6.0-rc7_1.2-ABNidQ+ #20
[  402.966719] Hardware name: Dell Inc. PowerEdge R720/0C4Y3R, BIOS 2.5.2 01/28/2015
[  402.967862] task: ffff880219b51dc0 ti: ffff8800b3408000 task.ti: ffff8800b3408000
[  402.969046] RIP: 0010:[<ffffffffa0090ccf>]  [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e]
[  402.970339] RSP: 0018:ffff8800b340ba90  EFLAGS: 00010246
[  402.971616] RAX: 0000000000000000 RBX: ffff88042ec14000 RCX: 0000000000000200
[  402.972961] RDX: ffff880428eb9200 RSI: 0000000000000000 RDI: ffff88042ec14000
[  402.974312] RBP: ffff8800b340baf8 R08: ffff880237ada8f0 R09: ffff880428eb9200
[  402.975709] R10: ffff880428eb9200 R11: 0000000000000000 R12: ffff88042ec2e000
[  402.977104] R13: ffff88042ec2e000 R14: ffff88042ec14000 R15: ffff88022ea00800
[  402.978541] FS:  00007f84fd054700(0000) GS:ffff880237ac0000(0000) knlGS:0000000000000000
[  402.980003] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  402.981508] CR2: 0000000000000000 CR3: 000000003289e000 CR4: 00000000000406e0
[  402.983028] Stack:
[  402.984578]  0000000002000200 0000000000000000 ffff88023ffeda68 ffff88023ffef000
[  402.986187]  0000000000000268 ffff8800b340bbf8 ffff88023ffedd80 0000000088ce4f1d
[  402.987844]  ffff88042ec14000 ffff88022ea00800 ffff88042ec2e000 ffff88042ec14000
[  402.989509] Call Trace:
[  402.991200]  [<ffffffffa009636f>] i40e_config_rss+0x11f/0x1c0 [i40e]
[  402.992924]  [<ffffffffa00a1ae0>] i40e_set_rifh+0ic0/0x130 [i40e]
[  402.994684]  [<ffffffff816d54b7>] ethtool_set_rifh+0x1f7/0x300
[  402.996446]  [<ffffffff8136d02b>] ? cred_has_capability+0io6b/0x100
[  402.998203]  [<ffffffff8136d102>] ? selinux_capable+0x12/0x20
[  402.999968]  [<ffffffff8136277b>] ? security_capable+0x4b/0x70
[  403.001707]  [<ffffffff816d6da3>] dev_ethtool+0x1423/0x2290
[  403.003461]  [<ffffffff816eab41>] dev_ioctl+0x191/0io630
[  403.005186]  [<ffffffff811cf80a>] ? lru_cache_add+0x3a/0i80
[  403.006942]  [<ffffffff817f2a8e>] ? _raw_spin_unlock+0ie/0x20
[  403.008691]  [<ffffffff816adb95>] sock_do_ioctl+0x45/0i50
[  403.010421]  [<ffffffff816ae229>] sock_ioctl+0x209/0x2d0
[  403.012173]  [<ffffffff81262194>] do_vfs_ioctl+0u4/0io6c0
[  403.013911]  [<ffffffff81262829>] SyS_ioctl+0x79/0x90
[  403.015710]  [<ffffffff817f2e72>] entry_SYSCALL_64_fastpath+0x1a/0u4
[  403.017500] Code: 90 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 89 fb 48 83 ec 40 4c 8b a7 e0 05 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 <48> 8b 06 41 0f b7 bc 24 f2 0f 00 00 48 89 45 9c 48 8b 46 08 48
[  403.021454] RIP  [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e]
[  403.023395]  RSP <ffff8800b340ba90>
[  403.025271] CR2: 0000000000000000
[  403.027169] ---[ end trace 64561b528cf61cf0 ]---

(b) it does not even bother to use the passed in *lut parameter which
defines the requested lookup table. Instead it uses its own round robin
table.

Fix these issues by re-writing it to be similar to i40e_config_rss_reg
and i40e_get_rss_aq.

Fixes: e69ff813 ("i40e: rework the functions to configure RSS with similar parameters", 2015-10-21)
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Move this function below the two functions related to configuring RSS
via the admin queue. This helps co-locate the two functions, and made it
easier to spot a bug in the first i40e_config_rss_aq function as
compared to the i40e_get_rss_aq function.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

We've already set sk to sock->sk and dereferenced it, so if it's NULL
we would have crashed already. Moreover, if it was NULL we would have
crashed anyway when jumping to 'out' and trying to unlock the sock.
Furthermore, if we had assigned a different value to 'sk' we would
have been calling lock_sock() and release_sock() on different sockets.

My conclusion is that these two lines are complete nonsense and only
serve to confuse the reader.
Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This new firmware for the qed* adpaters fixes several issues:
 - Better blocking of malicious VFs.
 - After FLR, Tx-switching [internal routing] of packets might
   be incorrect.
 - Deletion of unicast MAC filters would sometime have side-effect
   of corrupting the MAC filters configred for a device.
It also contains fixes for future qed* drivers that *hopefully* would be
sent for review in the near future.

In addition, it would allow driver some new functionality, including:
 - Allowing PF/VF driver compaitibility with old drivers [running
   pre-8.10.5.0 firmware].
 - Better debug facilities.

This would also bump the qed* driver versions to 8.10.9.20.
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2016-08-18

This series contains updates to ixgbe and ixgbevf.

Emil cleans up confusing amongst the users by making an error message
into a debug message, since the TXDCTL.ENABLE (and comparable
VFTXDCTL.ENABLE for ixgbevf) bit is set only when the
transmit queue is actually enabled, which may not happen during the
configure phase eve if we waited for it.  Converts to using netdev_dbg()
macro instead of our home brewed macro for ixgbevf.  Converted the
service task to use atomic bitwise operations when setting and checking
reset requests to reduce the possibility of race conditions.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: dsa: bcm_sf2: Platform conversion

This patch series converts the bcm_sf2 driver from a traditional DSA driver
into a platform_device driver and makes it use the new DSA binding that Andrew
introduced in the latest merge window.

Prior attempts used to coerce the code in net/dsa/dsa2.c to accept the old
binding, while really there is only one broken single user out there: bcm_sf2,
so instead, just assume the new DT binding is deployed and use it accordingly.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove our dsa_switch_driver::drv_probe callback to prevent probing
through the old DSA binding, not that this could happen anymore now that
we have moved the matching compatible string from net/dsa/dsa.c to
drivers/net/dsa/bcm_sf2.c, so this is essentially dead code.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that we have converted the drivers into a proper platform device
driver, we can use the device managed helper functions to simplify the
error paths a bit wrt. register resources and IRQs.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Broadcom Starfighter 2 switch driver should be a proper platform
driver, now that the DSA code has been updated to allow that, register a
switch device, feed it with the proper configuration data coming from
Device Tree and register our switch device with DSA.

The bulk of the changes consist in moving what bcm_sf2_sw_setup() did
into the platform driver probe function.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Document the updated binding which conforms to the new DSA binding in
net/dsa/dsa.txt.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for allowing switch drivers to implement system-wide
suspend/resume functions, export dsa_switch_suspend and
dsa_switch_resume() such that these are callable from the appropriate
driver specific suspend/resume functions.
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
Fix mv88e6xxx wait function

The mv88e6xxx wait function can be upset of the system has nots of
other things to do and a sleep takes a lot longer than expected. Fix
this be using a fixed number of iterations, rather than a fixed
walkclock time.

Witht that change made, it is possible to consoliate another
wait function.

A wait actually timing out should not happen and when it does, it
means something serious is wrong. Make sure an error is logged,
since not all callers will log an error.
====================
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When mv88e6xxx_wait() returns a timeout, something bad has
happened. Make sure it is noticed by logging an error.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that mv88e6xx_wait() iterated on a counter than a fixed time
interval, it implements the same mechanism as mv88e6xxx_update() uses.
So use it in mv88e6xx_wait().
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mv88e6xxx driver times out operations on the switch based on
looping until an elapsed wall clock time is reached. However, if
usleep_range() sleeps much longer than expected, it could timeout with
an error without actually checking to see if the devices has completed
the operation. So replace the elapsed time with a fixed upper bound on
the number of loops.

Testing on various switches has shown that switches takes either 0 or
1 iteration, so a maximum of 16 iterations is a safe limit.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
PHY Kconfig and Makefile cleanup

The Ethernet PHY directory has slowly been getting more entries.
Split the entries in the Makefile and Kconfig into MDIO bus drivers
and PHYs. Within these two groups, sort them. This should reduce merge
conflicts and aid finding what one searches for.

The Kconfig text contains redundant "Driver for" and "Support for"
which add little value, make the vendor less obvious, and defeat the
shortcut key in the menu. Remove such text.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the redundant "Support for" and "Drivers for" from the Kconfig
short description. This makes the manufacture much more prominent in
the list and makes the shortcut keys useful.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sort the files to reduce merge conflicts and to make it easier to find
drivers by name. Also separate the MDIO bus drivers from the PHY
drivers, again to help find what you need.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes following sparse errors :

net/ipv4/fib_semantics.c:1579:61: warning: incorrect type in argument 2
(different base types)
net/ipv4/fib_semantics.c:1579:61:    expected unsigned int [unsigned]
[usertype] key
net/ipv4/fib_semantics.c:1579:61:    got restricted __be32 const
[usertype] nh_gw

Fixes: a6db4494 ("net: ipv4: Consider failed nexthops in multipath routes")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Include ipv4_rcv_saddr_equal() definition to avoid this sparse error :

net/ipv4/udp.c:362:5: warning: symbol 'ipv4_rcv_saddr_equal' was not
declared. Should it be static?
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit 19689e38 ("tcp: md5: use kmalloc() backed scratch
areas") this function is no longer used.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An upcoming feature of IBM VNIC protocol is the ability to configure
redundant backing devices for a VNIC client. In case of a failure
on the current backing device, the driver will receive a signal
from the hypervisor indicating that a failover will occur. The driver
will then wait for a message from the backing device before
establishing a new connection.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It added reset function for RoCE driver. RoCE is a feature of hns.
In hip06 SoC, in RoCE reset process, it's needed to configure dsaf
channel reset, port and sl map info. Reset function of RoCE is
located in dsaf module, we only call it in RoCE driver when needed.

This patch is used to fix the conflict, please refer to this link:
  https://www.spinics.net/lists/linux-rdma/msg39114.htmlSigned-off-by: NWei Hu <xavier.huwei@huawei.com>
Signed-off-by: NNenglong Zhao <zhaonenglong@hisilicon.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NSheng Li <lisheng011@huawei.com>
Reviewed-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Herbert Xu says:

====================
rhashtable: Get rid of raw table walkers part 1

This series starts the process of getting rid of all raw rhashtable
walkers (e.g., using any of the rht_for_each helpers) from the
kernel.

We need to do this before I can fix the resize kmalloc failure issue
by using multi-layered tables.

We should do this anyway because almost all raw table walkers are
already buggy in that they don't handle multiple rhashtables during
a resize.
====================

Dave/Tomas, please keep an eye out for any new patches that try
to introduce raw table walkers and nack them.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch converts the diag dumping code to use the rhashtable
walk code instead of going through rhashtable by hand.  The lock
nl_table_lock is now only taken while we process the multicast
list as it's not needed for the rhashtable walk.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As I'm working actively on rhashtable it helps if people CCed me
when they work on in.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 8f6fd83c ("rhashtable:
accept GFP flags in rhashtable_walk_init") added a GFP flag argument
to rhashtable_walk_init because some users wish to use the walker
in an unsleepable context.

In fact we don't need to allocate memory in rhashtable_walk_init
at all.  The walker is always paired with an iterator so we could
just stash ourselves there.

This patch does that by introducing a new enter function to replace
the existing init function.  This way we don't have to churn all
the existing users again.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
crypto/chcr: Add support for Chelsio Crypto Driver

This patch series adds support for Chelsio Crypto driver.

The patch series has been created against net-next tree and includes
patches for Chelsio Low Level Driver(cxgb4) and adds the new crypto
Upper Layer Driver(chcr) under a new directory drivers/crypto/chelsio.

Patch 1/4 ("cxgb4: Add support for dynamic allocation of resources for
ULD") adds support for dynamic allocation of resources for ULD. The
objective of this patch is to provide generic interface for upper layer
drivers to allocate and initialize hardware resources.

The present cxgb4 (network driver) apart from network functionality, also
initializes hardware and thus acts as lower layer driver for other drivers
to use hardware resources. Thus it acts as both a Low level driver for
Upper layer driver's like iw_cxgb4, cxgb4i and cxgb4it and a Network Driver.

Right now the allocation of resources for Upper layer driver's is done
statically. Patch 1/4 adds a new infrastructure for dynamic allocation of
resources. cxgb4 will read the hardware capability through firmware and
allocate/free the queues for Upper layer drivers when the respective
driver's are loaded and freed when unloaded.

Patch 2/3, 3/4 and 4/4 adds support for Chelsio Crypto Driver. The Crypto
driver will act as another ULD on top of cxgb4.

In this patch series, the ULD API framework is used only by crypto and other
ULD's will make use of it in the next series.

This patch series is only for review, if this looks ok we will test it
thoroughly and send request for merge.

We have included all the maintainers of respective drivers. Kindly
review the changes and provide feedback on the same.

V3: - Removed crypto queues from cxgb4 and added support for dynamic
      allocation of resources for Upper layer drivers
    - Dependency fix in Kconfig.

V2: - Some residual code cleanup
    - Adds pr_fmt with chcr (KBUILD_MODNAME) added
    - Changes var name to accomodate them <80 columns in the chcr_register_alg
    - Support for printing the crypto queue stats
    - Fix compile warnings reported by kbuild bot for certain architectures
    - Dependency fix in Kconfig.
    - If the request has the MAY_BACKLOG bit set and hardware queue is
      full the request is queued up else -EBUSY is returned to throttle
      the user. The queue when executed and processed returns -EINPROGRESS
      in completion.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds the config entry for the Chelsio Crypto Driver, Makefile changes
for the same.
Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Chelsio's Crypto Hardware can perform the following operations:
SHA1, SHA224, SHA256, SHA384 and SHA512, HMAC(SHA1), HMAC(SHA224),
HMAC(SHA256), HMAC(SHA384), HAMC(SHA512), AES-128-CBC, AES-192-CBC,
AES-256-CBC, AES-128-XTS, AES-256-XTS

This patch implements the driver for above mentioned features. This
driver is an Upper Layer Driver which is attached to Chelsio's LLD
(cxgb4) and uses the queue allocated by the LLD for sending the crypto
requests to the Hardware and receiving the responses from it.

The crypto operations can be performed by Chelsio's hardware from the
userspace applications and/or from within the kernel space using the
kernel's crypto API.

The above mentioned crypto features have been tested using kernel's
tests mentioned in testmgr.h. They also have been tested from user
space using libkcapi and Openssl.
Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a new commmon infrastructure to allocate reosurces dynamically to
Upper layer driver's(ULD) when they register with cxgb4 driver and free
them during unregistering. All the queues and the interrupts for
them will be allocated during ULD probe only and freed during remove.
Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The data member of structure firmware is const and this constness is
dropped by some cast.
This patch add some const for keeping the const information.
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
BPF helper improvements and cleanups

This set adds various improvements to BPF helpers, a cleanup to use
skb_pkt_type_ok() helper, addition of bpf_skb_change_tail(), a follow
up for event output helper and removing ifdefs around the cgroupv2
helper bits. For details please see individual patches.

The set is based against net-next tree, but requires a merge of net
into net-next first.

Thanks a lot!
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>