The kernel xstate area can be in standard or compacted format;
it is always in standard format for user mode. When XSAVES is
enabled, the kernel uses the compacted format and it is necessary
to use a separate fpu_user_xstate_size for signal/ptrace frames.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
[ Rebased the patch and cleaned up the naming. ]
Signed-off-by: NYu-cheng Yu <yu-cheng.yu@intel.com>
Reviewed-by: NDave Hansen <dave.hansen@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8756ec34dabddfc727cda5743195eb81e8caf91c.1463760376.git.yu-cheng.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Leonid Shatz noticed that the SDM interpretation of the following
recent commit:

  394db20c ("x86/fpu: Disable AVX when eagerfpu is off")

... is incorrect and that the original behavior of the FPU code was correct.

Because AVX is not stated in CR0 TS bit description, it was mistakenly
believed to be not supported for lazy context switch. This turns out
to be false:

  Intel Software Developer's Manual Vol. 3A, Sec. 2.5 Control Registers:

   'TS Task Switched bit (bit 3 of CR0) -- Allows the saving of the x87 FPU/
    MMX/SSE/SSE2/SSE3/SSSE3/SSE4 context on a task switch to be delayed until
    an x87 FPU/MMX/SSE/SSE2/SSE3/SSSE3/SSE4 instruction is actually executed
    by the new task.'

  Intel Software Developer's Manual Vol. 2A, Sec. 2.4 Instruction Exception
  Specification:

   'AVX instructions refer to exceptions by classes that include #NM
    "Device Not Available" exception for lazy context switch.'

So revert the commit.
Reported-by: NLeonid Shatz <leonid.shatz@ravellosystems.com>
Signed-off-by: NYu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457569734-3785-1-git-send-email-yu-cheng.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The protection keys register (PKRU) is saved and restored using
xsave.  Define the data structure that we will use to access it
inside the xsave buffer.

Note that we also have to widen the printk of the xsave feature
masks since this is feature 0x200 and we only did two characters
before.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210204.56DF8F7B@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When "eagerfpu=off" is given as a command-line input, the kernel
should disable AVX support.

The Task Switched bit used for lazy context switching does not
support AVX. If AVX is enabled without eagerfpu context
switching, one task's AVX state could become corrupted or leak
to other tasks. This is a bug and has bad security implications.

This only affects systems that have AVX/AVX2/AVX512 and this
issue will be found only when one actually uses AVX/AVX2/AVX512
_AND_ does eagerfpu=off.

Reference: Intel Software Developer's Manual Vol. 3A

Sec. 2.5 Control Registers:
TS Task Switched bit (bit 3 of CR0) -- Allows the saving of the
x87 FPU/ MMX/SSE/SSE2/SSE3/SSSE3/SSE4 context on a task switch
to be delayed until an x87 FPU/MMX/SSE/SSE2/SSE3/SSSE3/SSE4
instruction is actually executed by the new task.

Sec. 13.4.1 Using the TS Flag to Control the Saving of the X87
FPU and SSE State
When the TS flag is set, the processor monitors the instruction
stream for x87 FPU, MMX, SSE instructions. When the processor
detects one of these instructions, it raises a
device-not-available exeception (#NM) prior to executing the
instruction.
Signed-off-by: NYu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1452119094-7252-5-git-send-email-yu-cheng.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

There are two concepts that have some confusing naming:
 1. Extended State Component numbers (currently called
    XFEATURE_BIT_*)
 2. Extended State Component masks (currently called XSTATE_*)

The numbers are (currently) from 0-9.  State component 3 is the
bounds registers for MPX, for instance.

But when we want to enable "state component 3", we go set a bit
in XCR0.  The bit we set is 1<<3.  We can check to see if a
state component feature is enabled by looking at its bit.

The current 'xfeature_bit's are at best xfeature bit _numbers_.
Calling them bits is at best inconsistent with ending the enum
list with 'XFEATURES_NR_MAX'.

This patch renames the enum to be 'xfeature'.  These also
happen to be what the Intel documentation calls a "state
component".

We also want to differentiate these from the "XSTATE_*" macros.
The "XSTATE_*" macros are a mask, and we rename them to match.

These macros are reasonably widely used so this patch is a
wee bit big, but this really is just a rename.

The only non-mechanical part of this is the

	s/XSTATE_EXTEND_MASK/XFEATURE_MASK_EXTEND/

We need a better name for it, but that's another patch.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233126.38653250@viggo.jf.intel.com
[ Ported to v4.3-rc1. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

When we want to _completely_ disable XSAVE support as far as
the kernel is concerned, we have a big set of feature flags
to clear.  We currently only do this in cases where the user
asks for it to be disabled, but we are about to expand the
places where we do it to handle errors too.

Move the code in to xstate.c, and put it in the xstate.h
header.  We will use it in the next patch too.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233124.EA9A70E5@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The MPX code appears is calling a low-level FPU function
(copy_fpregs_to_fpstate()).  This function is not able to
be called in all contexts, although it is safe to call
directly in some cases.

Although probably correct, the current code is ugly and
potentially error-prone.  So, add a wrapper that calls
the (slightly) higher-level fpu__save() (which is preempt-
safe) and also ensures that we even *have* an FPU context
(in the case that this was called when in lazy FPU mode).

Ingo had this to say about the details about when we need
preemption disabled:

> it's indeed generally unsafe to access/copy FPU registers with preemption enabled,
> for two reasons:
>
>   - on older systems that use FSAVE the instruction destroys FPU register
>     contents, which has to be handled carefully
>
>   - even on newer systems if we copy to FPU registers (which this code doesn't)
>     then we don't want a context switch to occur in the middle of it, because a
>     context switch will write to the fpstate, potentially overwriting our new data
>     with old FPU state.
>
> But it's safe to access FPU registers with preemption enabled in a couple of
> special cases:
>
>   - potentially destructively saving FPU registers: the signal handling code does
>     this in copy_fpstate_to_sigframe(), because it can rely on the signal restore
>     side to restore the original FPU state.
>
>   - reading FPU registers on modern systems: we don't do this anywhere at the
>     moment, mostly to keep symmetry with older systems where FSAVE is
>     destructive.
>
>   - initializing FPU registers on modern systems: fpu__clear() does this. Here
>     it's safe because we don't copy from the fpstate.
>
>   - directly writing FPU registers from user-space memory (!). We do this in
>     fpu__restore_sig(), and it's safe because neither context switches nor
>     irq-handler FPU use can corrupt the source context of the copy (which is
>     user-space memory).
>
> Note that the MPX code's current use of copy_fpregs_to_fpstate() was safe I think,
> because:
>
>  - MPX is predicated on eagerfpu, so the destructive F[N]SAVE instruction won't be
>    used.
>
>  - the code was only reading FPU registers, and was doing it only in places that
>    guaranteed that an FPU state was already active (i.e. didn't do it in
>    kthreads)
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave@sr71.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/20150607183700.AA881696@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

All the other register<-> memory copying functions are defined
in fpu/internal.h, so move the xstate variants there too.

Beyond being more consistent, this also allows FPU debugging
checks to be added to them. (Because they can now use the
macros defined in fpu/internal.h.)

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

While looking at xstate.h it took me some time to realize that
'xstate_fault' uses 'err' as a silent parameter. This is not
obvious at the call site, at all.

Make it an explicit macro argument, so that the syntactic
connection is easier to see. Also explain xstate_fault()
a bit.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

So call setup_xstate_comp() from the xstate init code, not
from the generic fpu__init_system() code.

This allows us to remove the protytype from xstate.h as well.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Use these consistent names:

    struct fregs_state           # was: i387_fsave_struct
    struct fxregs_state          # was: i387_fxsave_struct
    struct swregs_state          # was: i387_soft_struct
    struct xregs_state           # was: xsave_struct
    union  fpregs_state          # was: thread_xstate

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Standardize the naming of the various functions that copy register
content in specific FPU context formats:

  copy_fxregs_to_kernel()         # was: fpu_fxsave()
  copy_xregs_to_kernel()          # was: xsave_state()

  copy_kernel_to_fregs()          # was: frstor_checking()
  copy_kernel_to_fxregs()         # was: fxrstor_checking()
  copy_kernel_to_xregs()          # was: fpu_xrstor_checking()
  copy_kernel_to_xregs_booting()  # was: xrstor_state_booting()

  copy_fregs_to_user()            # was: fsave_user()
  copy_fxregs_to_user()           # was: fxsave_user()
  copy_xregs_to_user()            # was: xsave_user()

  copy_user_to_fregs()            # was: frstor_user()
  copy_user_to_fxregs()           # was: fxrstor_user()
  copy_user_to_xregs()            # was: xrestore_user()
  copy_user_to_fpregs_zeroing()   # was: restore_user_xstate()

Eliminate fpu_xrstor_checking(), because it was just a wrapper.

No change in functionality.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

So the handling of init_xstate_ctx has a layering violation: both
'struct xsave_struct' and 'union thread_xstate' have a
'struct i387_fxsave_struct' member:

   xsave_struct::i387
   thread_xstate::fxsave

The handling of init_xstate_ctx is generic, it is used on all
CPUs, with or without XSAVE instruction. So it's confusing how
the generic code passes around and handles an XSAVE specific
format.

What we really want is for init_xstate_ctx to be a proper
fpstate and we use its ::fxsave and ::xsave members, as
appropriate.

Since the xsave_struct::i387 and thread_xstate::fxsave aliases
each other this is not a functional problem.

So implement this, and move init_xstate_ctx to the generic FPU
code in the process.

Also, since init_xstate_ctx is not XSAVE specific anymore,
rename it to init_fpstate, and mark it __read_mostly,
because it's only modified once during bootup, and used
as a reference fpstate later on.

There's no change in functionality.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Only a few places use the regset definitions, so factor them out.

Also fix related header dependency assumptions.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

We'd like to use xsave_state() earlier, but its SYSTEM_BOOTING check
is too imprecise.

The real condition that xsave_state() would like to check is whether
alternative XSAVE instructions were patched into the kernel image
already.

Add such a (read-mostly) debug flag and use it in xsave_state().

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

So xsave.h is an internal header that FPU using drivers commonly include,
to get access to the xstate feature names, amongst other things.

Move these type definitions to fpu/fpu.h to allow simplification
of FPU using driver code.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Transform the xstate masks into an enumerated list of xfeature bits.

This removes the hard coding of XFEATURES_NR_MAX.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

'xsave' is an x86 instruction name to most people - but xsave.h is
about a lot more than just the XSAVE instruction: it includes
definitions and support, both internal and external, related to
xstate and xfeatures support.

As a first step in cleaning up the various xstate uses rename this
header to 'fpu/xstate.h' to better reflect what this header file
is about.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

__save_fpu() has this pattern:

		if (unlikely(system_state == SYSTEM_BOOTING))
			xsave_state_booting(&fpu->state.xsave);
		else
			xsave_state(&fpu->state.xsave);

... but it does not actually get called during system bootup.

So remove the complication and always call xsave_state().

To make sure this assumption is correct, add a WARN_ONCE()
debug check to xsave_state().
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Expand fpu__init_system_xstate() and fpu__init_cpu_xstate() calls
into xsave_init() calls.

(This will allow us to call the proper versions in higher level FPU init code
later on.)

No change in functionality.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Make init_xstate_buf allocated statically at build time.

This structure's maximum size is around 1KB - and it's allocated even on
most modern embedded x86 CPUs which strive for FPU instruction set parity
with desktop and server CPUs, so it's not like we can save much on smaller
systems.

This removes the last bootmem allocation from the FPU init path, allowing
it to be called earlier in the boot sequence.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

There's only 8 xstate bits at the moment, and it's not like we
can support unknown bits - so put xstate_offsets[] and
xstate_sizes[] into static allocation.

This is in preparation to be able to call the FPU init code
earlier, when there's no bootmem available yet.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Code like:

           fpu->state->xsave.xsave_hdr.xstate_bv |= XSTATE_FP;

is an eyesore, because not only is the words 'xsave' and 'state'
are repeated twice times (!), but also because of the 'hdr' and 'bv'
abbreviations that are pretty meaningless at a first glance.

Start cleaning this up by renaming 'xsave_hdr' to 'header'.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

So the 'pcntxt_mask' is a misnomer, it's essentially meaningless to anyone
who doesn't know what it does exactly.

Name it more descriptively as 'xfeatures_mask'.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Move the xsave.h header file to the FPU directory as well.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

It's a pointless wrapper now - use xsave_state().
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

These functions (xsave_state() and xsave_state_booting()) have a 'mask'
argument that is always -1.

Propagate this into the functions instead and eliminate the extra argument.

Does not change the generated code, because these were inlined functions.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

We are going to split init_fpu() so keep only a single prototype, in i387.h.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Commit:

  f31a9f7c ("x86/xsaves: Use xsaves/xrstors to save and restore xsave area")

introduced alternative instructions for XSAVES/XRSTORS and commit:

  adb9d526 ("x86/xsaves: Add xsaves and xrstors support for booting time")

added support for the XSAVES/XRSTORS instructions at boot time.

Unfortunately both failed to properly protect them against faulting:

The 'xstate_fault' macro will use the closest label named '1'
backward and that ends up in the .altinstr_replacement section
rather than in .text. This means that the kernel will never find
in the __ex_table the .text address where this instruction might
fault, leading to serious problems if userspace manages to
trigger the fault.
Signed-off-by: NQuentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: NJamie Iles <jamie.iles@oracle.com>
[ Improved the changelog, fixed some whitespace noise. ]
Acked-by: NBorislav Petkov <bp@alien8.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Cc: Allan Xavier <mr.a.xavier@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: adb9d526 ("x86/xsaves: Add xsaves and xrstors support for booting time")
Fixes: f31a9f7c ("x86/xsaves: Use xsaves/xrstors to save and restore xsave area")
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Expose Intel AVX-512 feature bits to guest. Also add checks for
xcr0 AVX512 related bits according to spec:
http://download-software.intel.com/sites/default/files/managed/71/2e/319433-017.pdfSigned-off-by: NChao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a missing inline annotation on a static function, in order to shut
up a bunch of warnings like:

In file included from arch/x86/crypto/camellia_aesni_avx_glue.c:23:0:
./arch/x86/include/asm/xsave.h:73:12: warning: ‘xsave_state_booting’ defined but not used [-Wunused-function]
 static int xsave_state_booting(struct xsave_struct *fx, u64 mask)
            ^
In file included from arch/x86/crypto/camellia_aesni_avx2_glue.c:23:0:
./arch/x86/include/asm/xsave.h:73:12: warning: ‘xsave_state_booting’ defined but not used [-Wunused-function]
 static int xsave_state_booting(struct xsave_struct *fx, u64 mask)
            ^
...

Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1403000468-30094-1-git-send-email-bp@alien8.deSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The XSAVE instruction family takes a memory argment.  The macros use
(%edi)/(%rdi) as that memory argument - make that clear to the reader.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1401387164-43416-7-git-send-email-fenghua.yu@intel.com

In standard form, each state is saved in the xsave area in fixed offset.
But in compacted form, offset of each saved state only can be calculated during
run time because some xstates may not be enabled and saved.

We define kernel API get_xsave_addr() returns address of a given state saved in a xsave area.

It can be called in kernel to get address of each xstate in xsave area in
either standard format or compacted format.

It's useful when kernel wants to directly access each state in xsave area.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1401387164-43416-17-git-send-email-fenghua.yu@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Since boot_cpu_data and cpu capabilities are not enabled yet during early
booting time, alternative can not be used in some functions to access xsave
area. Therefore, we define two new functions xrstor_state_booting() and
xsave_state_booting() to access xsave area just during early booting time.

xrstor_state_booting restores xstate from xsave area during early booting time.
xsave_state_booting saves xstate to xsave area during early booting time.

The two functions are similar to xrstor_state and xsave_state respectively.
But the two functions don't use alternatives because alternatives are not
enabled when they are called in such early booting time.

xrstor_state_booting is called only by functions defined as __init. So it's
defined as __init and will be removed from memory after booting time. There
is no extra memory cost caused by this function during running time.

But because xsave_state_booting can be called by run-time function __save_fpu(),
it's not defined as __init and will stay in memory during running time although
it will not be called anymore during running time. It is not ideal to
have this function stay in memory during running time. But it's a pretty small
function and the memory cost will be small. By doing in this way, we can
avoid to change a lot of code to just remove this small function and save a
bit memory for running time.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1401387164-43416-13-git-send-email-fenghua.yu@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

We use legacy xsave/xrstor to save and restore standard form of xsave area
in user space context. No xsaveopt or xsaves is used here for two reasons.

First, we don't want to use modified optimization which is implemented in
xsaveopt and xsaves because xrstor/xrstors might track a wrong user space
application.

Secondly, we don't use compacted format of xsave area for backward
compatibility because legacy user space applications only don't understand
the compacted format of the xsave area.

Using standard form of the xsave area may allocate more memory for
user context than compacted form, but preserves compatibility with
legacy applications.  Furthermore, even with holes, the relevant cache
lines don't get touched and thus the performance impact is limited.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1401387164-43416-11-git-send-email-fenghua.yu@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

If xsaves is eanbled, use xsaves/xrstors for context switch to support
compacted format xsave area to occupy less memory and modified optimization
to improve saving performance.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1401387164-43416-10-git-send-email-fenghua.yu@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

If xsaves is eanbled, use xsaves/xrstors instrucitons to save and restore
xstate. xsaves and xrstors support compacted format, init optimization,
modified optimization, and supervisor states.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1401387164-43416-9-git-send-email-fenghua.yu@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Define a macro to handle fault generated by xsave, xsaveopt, xsaves, xrstor,
and xrstors instructions. It is used in functions like xsave_state() etc.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1401387164-43416-8-git-send-email-fenghua.yu@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Define macros for xsave, xsaveopt, xsaves, xrstor, and xrstors inline
instructions. The instructions will be used for saving and restoring xstate.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1401387164-43416-7-git-send-email-fenghua.yu@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

From 00c920c96127d20d4c3bb790082700ae375c39a0 Mon Sep 17 00:00:00 2001
From: Liu Jinsong <jinsong.liu@intel.com>
Date: Fri, 21 Feb 2014 23:47:18 +0800
Subject: [PATCH] KVM: x86: Fix xsave cpuid exposing bug

EBX of cpuid(0xD, 0) is dynamic per XCR0 features enable/disable.
Bit 63 of XCR0 is reserved for future expansion.
Signed-off-by: NLiu Jinsong <jinsong.liu@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>