The warning output in trace_recursive_lock uses %d for a long when
it should be %ld.

[ Impact: fix compile warning ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes
an 'u32' to save the actually length for events which data size > 28.

This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA.

[ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ]
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <49F13189.3090000@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

On boot up, to save memory, ftrace allocates the minimum buffer
which is two pages. Ftrace also goes through a series of tests
(when configured) on boot up. These tests can fill up a page within
a single interrupt.

The ring buffer also has a WARN_ON when it detects that the buffer was
completely filled within a single commit (other commits are allowed to
be nested).

Combine the small buffer on start up, with the tests that can fill more
than a single page within an interrupt, this can trigger the WARN_ON.

This patch makes the WARN_ON only happen when the ring buffer consists
of more than two pages.

[ Impact: prevent false WARN_ON in ftrace startup tests ]
Reported-by: NIngo Molnar <mingo@elte.hu>
LKML-Reference: <20090421094616.GA14561@elte.hu>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Althought using the irq level (hardirq_count, softirq_count and in_nmi)
was nice to detect bad recursion right away, but since the counters are
not atomically updated with respect to the interrupts, the function tracer
might trigger the test from an interrupt handler before the hardirq_count
is updated. This will trigger a false warning.

This patch converts the recursive detection to a simple counter.
If the depth is greater than 16 then the recursive detection will trigger.
16 is more than enough for any nested interrupts.

[ Impact: fix false positive trace recursion detection ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The ring_buffer_event_discard is not tied to ring_buffer_lock_reserve.
It can be called inside or outside the reserve/commit. Even if it
is called inside the reserve/commit the commit part must also be called.

Only ring_buffer_discard_commit can be used as a replacement for
ring_buffer_unlock_commit.

This patch removes the trace_recursive_unlock from ring_buffer_event_discard
since it would be the wrong place to do so.

[Impact: prevent breakage in trace recursive testing ]

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The recursive tests to detect same level recursion in the ring buffers
did not account for the hard/softirq_counts to be shifted. Thus the
numbers could be larger than then mask to be tested.

This patch includes the shift for the calculation of the irq depth.

[ Impact: stop false positives in trace recursion detection ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The pair of helpers trace_recursive_lock() and trace_recursive_unlock()
have been introduced recently to provide generic tracing recursion
protection.

They are used in a symetric way:

 - trace_recursive_lock() on buffer reserve
 - trace_recursive_unlock() on buffer commit

However sometimes, we don't commit but discard on entry
to the buffer, ie: in case of filter checking.

Then we must also unlock the recursion protection on discard time,
otherwise the tracing gets definitely deactivated and a warning
is raised spuriously, such as:

111.119821] ------------[ cut here ]------------
[  111.119829] WARNING: at kernel/trace/ring_buffer.c:1498 ring_buffer_lock_reserve+0x1b7/0x1d0()
[  111.119835] Hardware name: AMILO Li 2727
[  111.119839] Modules linked in:
[  111.119846] Pid: 5731, comm: Xorg Tainted: G        W  2.6.30-rc1 #69
[  111.119851] Call Trace:
[  111.119863]  [<ffffffff8025ce68>] warn_slowpath+0xd8/0x130
[  111.119873]  [<ffffffff8028a30f>] ? __lock_acquire+0x19f/0x1ae0
[  111.119882]  [<ffffffff8028a30f>] ? __lock_acquire+0x19f/0x1ae0
[  111.119891]  [<ffffffff802199b0>] ? native_sched_clock+0x20/0x70
[  111.119899]  [<ffffffff80286dee>] ? put_lock_stats+0xe/0x30
[  111.119906]  [<ffffffff80286eb8>] ? lock_release_holdtime+0xa8/0x150
[  111.119913]  [<ffffffff802c8ae7>] ring_buffer_lock_reserve+0x1b7/0x1d0
[  111.119921]  [<ffffffff802cd110>] trace_buffer_lock_reserve+0x30/0x70
[  111.119930]  [<ffffffff802ce000>] trace_current_buffer_lock_reserve+0x20/0x30
[  111.119939]  [<ffffffff802474e8>] ftrace_raw_event_sched_switch+0x58/0x100
[  111.119948]  [<ffffffff808103b7>] __schedule+0x3a7/0x4cd
[  111.119957]  [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b
[  111.119964]  [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b
[  111.119971]  [<ffffffff80810c08>] schedule+0x18/0x40
[  111.119977]  [<ffffffff80810e09>] preempt_schedule+0x39/0x60
[  111.119985]  [<ffffffff80813bd3>] _read_unlock+0x53/0x60
[  111.119993]  [<ffffffff807259d2>] sock_def_readable+0x72/0x80
[  111.120002]  [<ffffffff807ad5ed>] unix_stream_sendmsg+0x24d/0x3d0
[  111.120011]  [<ffffffff807219a3>] sock_aio_write+0x143/0x160
[  111.120019]  [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b
[  111.120026]  [<ffffffff80721860>] ? sock_aio_write+0x0/0x160
[  111.120033]  [<ffffffff80721860>] ? sock_aio_write+0x0/0x160
[  111.120042]  [<ffffffff8031c283>] do_sync_readv_writev+0xf3/0x140
[  111.120049]  [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b
[  111.120057]  [<ffffffff80276ff0>] ? autoremove_wake_function+0x0/0x40
[  111.120067]  [<ffffffff8045d489>] ? cap_file_permission+0x9/0x10
[  111.120074]  [<ffffffff8045c1e6>] ? security_file_permission+0x16/0x20
[  111.120082]  [<ffffffff8031cab4>] do_readv_writev+0xd4/0x1f0
[  111.120089]  [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b
[  111.120097]  [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b
[  111.120105]  [<ffffffff8031cc18>] vfs_writev+0x48/0x70
[  111.120111]  [<ffffffff8031cd65>] sys_writev+0x55/0xc0
[  111.120119]  [<ffffffff80211e32>] system_call_fastpath+0x16/0x1b
[  111.120125] ---[ end trace 15605f4e98d5ccb5 ]---

[ Impact: fix spurious warning triggering tracing shutdown ]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

In case of tracing recursion detection, we only get the stacktrace.
But the current context may be very useful to debug the issue.

This patch adds the softirq/hardirq/nmi context with the warning
using lockdep context display to have a familiar output.

v2: Use printk_once()
v3: drop {hardirq,softirq}_context which depend on lockdep,
    only keep what is part of current->trace_recursion,
    sufficient to debug the warning source.

[ Impact: print context necessary to debug recursion ]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

The tracing infrastructure allows for recursion. That is, an interrupt
may interrupt the act of tracing an event, and that interrupt may very well
perform its own trace. This is a recursive trace, and is fine to do.

The problem arises when there is a bug, and the utility doing the trace
calls something that recurses back into the tracer. This recursion is not
caused by an external event like an interrupt, but by code that is not
expected to recurse. The result could be a lockup.

This patch adds a bitmask to the task structure that keeps track
of the trace recursion. To find the interrupt depth, the following
algorithm is used:

  level = hardirq_count() + softirq_count() + in_nmi;

Here, level will be the depth of interrutps and softirqs, and even handles
the nmi. Then the corresponding bit is set in the recursion bitmask.
If the bit was already set, we know we had a recursion at the same level
and we warn about it and fail the writing to the buffer.

After the data has been committed to the buffer, we clear the bit.
No atomics are needed. The only races are with interrupts and they reset
the bitmask before returning anywy.

[ Impact: detect same irq level trace recursion ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently, every thing needed to read the binary output from the
ring buffers is available, with the exception of the way the ring
buffers handles itself internally.

This patch creates two special files in the debugfs/tracing/events
directory:

 # cat /debug/tracing/events/header_page
        field: u64 timestamp;   offset:0;       size:8;
        field: local_t commit;  offset:8;       size:8;
        field: char data;       offset:16;      size:4080;

 # cat /debug/tracing/events/header_event
        type        :    2 bits
        len         :    3 bits
        time_delta  :   27 bits
        array       :   32 bits

        padding     : type == 0
        time_extend : type == 1
        data        : type == 3

This is to allow a userspace app to see if the ring buffer format changes
or not.

[ Impact: allow userspace apps to know of ringbuffer format changes ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The ring_buffer_discard_commit is similar to ring_buffer_event_discard
but it can only be done on an event that has yet to be commited.
Unpredictable results can happen otherwise.

The main difference between ring_buffer_discard_commit and
ring_buffer_event_discard is that ring_buffer_discard_commit will try
to free the data in the ring buffer if nothing has addded data
after the reserved event. If something did, then it acts almost the
same as ring_buffer_event_discard followed by a
ring_buffer_unlock_commit.

Note, either ring_buffer_commit_discard and ring_buffer_unlock_commit
can be called on an event, not both.

This commit also exports both discard functions to be usable by
GPL modules.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Most of the tracing files creation follow the same pattern:

ret = debugfs_create_file(...)
if (!ret)
	pr_warning("Couldn't create ... entry\n")

Unify it!
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1238109938-11840-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Impact: prevent possible memory leak

The reader page of the ring buffer is special. Although it points
into the ring buffer, it is not part of the actual buffer. It is
a page used by the reader to swap with a page in the ring buffer.
Once the swap is made, the new reader page is again outside the
buffer.

Even though the reader page points into the buffer, it is really
pointing to residual data. Note, this data is used by the reader.

              reader page
                  |
                  v
       (prev)   +---+    (next)
     +----------|   |----------+
     |          +---+          |
     v                         v
   +---+        +---+        +---+
-->|   |------->|   |------->|   |--->
<--|   |<-------|   |<-------|   |<---
   +---+        +---+        +---+

     ^            ^            ^
      \           |            /
       ------- Buffer---------

If we perform a list_del_init() on the reader page we will actually remove
the last page the reader swapped with and not the reader page itself.
This will cause that page to not be freed, and thus is a memory leak.

Luckily, the only user of the ring buffer so far is ftrace. And ftrace
will not free its ring buffer after it allocates it. There is no current
possible memory leak. But once there are other users, or if ftrace
dynamically creates and frees its ring buffer, then this would be a
memory leak.

This patch fixes the leak for future cases.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard
events from the ring buffer, for the event-filtering mechanism
introduced in a subsequent patch.

I did the initial version but thanks to Steven Rostedt for adding
the parts that actually made it work. ;-)
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: remove a section warning

CONFIG_DEBUG_SECTION_MISMATCH raises the following warning on -tip:

  WARNING: kernel/trace/built-in.o(.text+0x5bc5): Section mismatch in
  reference from the function ring_buffer_alloc() to the function
  .cpuinit.text:rb_cpu_notify()
  The function ring_buffer_alloc() references
  the function __cpuinit rb_cpu_notify().

This is actually harmless. The code in the ring buffer don't build
rb_cpu_notify and other cpu hotplug stuffs when !CONFIG_HOTPLUG_CPU
so we have no risk to reference freed memory here (it would even
be harmless if we unconditionally build it because register_cpu_notifier
would do nothing when !CONFIG_HOTPLUG_CPU.

But since ring_buffer_alloc() can be called everytime, we don't want it
to be annotated with __cpuinit so we drop the __cpuinit from
rb_cpu_notify.

This is not a waste of memory because it is only defined and used on
CONFIG_HOTPLUG_CPU.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237606416-22268-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix warning with irqsoff tracer

The ring buffer allocates its buffers on pre-smp time (early_initcall).
It means that, at first, only the boot cpu buffer is allocated and
the ring-buffer cpumask only has the boot cpu set (cpu_online_mask).

Later, the secondary cpu will show up and the ring-buffer will be notified
about this event: the appropriate buffer will be allocated and the cpumask
will be updated.

Unfortunately, if !CONFIG_CPU_HOTPLUG, the ring-buffer will not be
notified about the secondary cpus, meaning that the cpumask will have
only the cpu boot set, and only one cpu buffer allocated.

We fix that by using cpu_possible_mask if !CONFIG_CPU_HOTPLUG.

This patch fixes the following warning with irqsoff tracer running:

[  169.317794] WARNING: at kernel/trace/trace.c:466 update_max_tr_single+0xcc/0xf3()
[  169.318002] Hardware name: AMILO Li 2727
[  169.318002] Modules linked in:
[  169.318002] Pid: 5624, comm: bash Not tainted 2.6.29-rc8-tip-02636-g6aafa6c #11
[  169.318002] Call Trace:
[  169.318002]  [<ffffffff81036182>] warn_slowpath+0xea/0x13d
[  169.318002]  [<ffffffff8100b9d6>] ? ftrace_call+0x5/0x2b
[  169.318002]  [<ffffffff8100b9d6>] ? ftrace_call+0x5/0x2b
[  169.318002]  [<ffffffff8100b9d1>] ? ftrace_call+0x0/0x2b
[  169.318002]  [<ffffffff8101ef10>] ? ftrace_modify_code+0xa9/0x108
[  169.318002]  [<ffffffff8106e27f>] ? trace_hardirqs_off+0x25/0x27
[  169.318002]  [<ffffffff8149afe7>] ? _spin_unlock_irqrestore+0x1f/0x2d
[  169.318002]  [<ffffffff81064f52>] ? ring_buffer_reset_cpu+0xf6/0xfb
[  169.318002]  [<ffffffff8106637c>] ? ring_buffer_reset+0x36/0x48
[  169.318002]  [<ffffffff8106aeda>] update_max_tr_single+0xcc/0xf3
[  169.318002]  [<ffffffff8100bc17>] ? sysret_check+0x22/0x5d
[  169.318002]  [<ffffffff8106e3ea>] stop_critical_timing+0x142/0x204
[  169.318002]  [<ffffffff8106e4cf>] trace_hardirqs_on_caller+0x23/0x25
[  169.318002]  [<ffffffff8149ac28>] trace_hardirqs_on_thunk+0x3a/0x3c
[  169.318002]  [<ffffffff8100bc17>] ? sysret_check+0x22/0x5d
[  169.318002] ---[ end trace db76cbf775a750cf ]---

Because this tracer may try to swap two cpu ring buffers for an
unregistered cpu on the ring buffer.

This patch might also fix a fair loss of traces due to unallocated buffers
for secondary cpus.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-b: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237470453-5427-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds a new function called ring_buffer_set_clock that
allows a tracer to assign its own clock source to the buffer.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

In a private email conversation I explained how the ring buffer
page worked by using silly ASCII art. Ingo suggested that I add
that to the comments of the code.

Here it is.
Requested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: speed up and remove possible races

The get_online_cpus was added to the ring buffer because the original
design would free the ring buffer on a CPU that was being taken
off line. The final design kept the ring buffer around even when the
CPU was taken off line. This is to allow a user to still read the
information on that ring buffer.

Most of the get_online_cpus are no longer needed since the ring buffer will
not disappear from the use cases.
Reported-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

The hotplug code in the ring buffers is for use with CPU hotplug,
not generic hotplug.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: save on memory

Currently, a ring buffer was allocated for each "possible_cpus". On
some systems, this is the same as NR_CPUS. Thus, if a system defined
NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless
ring buffers taking up space. With a default buffer of 3 megs, this
could be quite drastic.

This patch changes the ring buffer code to only allocate ring buffers
for online CPUs.  If a CPU goes off line, we do not free the buffer.
This is because the user may still have trace data in that buffer
that they would like to look at.

Perhaps in the future we could add code to delete a ring buffer if
the CPU is offline and the ring buffer becomes empty.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: cleanup

All file_operations structures should be constant. No one is going to
change them.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

If a partial ring_buffer_page_read happens, then some of the
incremental timestamps may be lost. This patch writes the
recent timestamp into the page that is passed back to the caller.

A partial ring_buffer_page_read is where the full page would not
be written back to the user, and instead, just part of the page
is copied to the user. A full page would be a page swap with the
ring buffer and the timestamps would be correct.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: dont leave holes in read buffer page

The ring_buffer_read_page swaps a given page with the reader page
of the ring buffer, if certain conditions are set:

 1) requested length is big enough to hold entire page data

 2) a writer is not currently on the page

 3) the page is not partially consumed.

Instead of swapping with the supplied page. It copies the data to
the supplied page instead. But currently the data is copied in the
same offset as the source page. This causes a hole at the start
of the reader page. This complicates the use of this function.
Instead, it should copy the data at the beginning of the function
and update the index fields accordingly.

Other small clean ups are also done in this patch.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: fix to possible alignment problems on some archs.

Some arch compilers include an NULL char array in the sizeof field.
Since the ring_buffer_event type includes one of these, it is better
to use the "offsetof" instead, to avoid strange bugs on these archs.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

The ring_buffer_read_page was broken if it were to only copy part
of the page. This patch fixes that up as well as adds a parameter
to allow a length field, in order to only copy part of the buffer page.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: fix ring_buffer_read_page

After a page is swapped into the ring buffer, the write field must
also be reset.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: implement new tracing timestamp APIs

Add three trace clock variants, with differing scalability/precision
tradeoffs:

 -   local: CPU-local trace clock
 -  medium: scalable global clock with some jitter
 -  global: globally monotonic, serialized clock

Make the ring-buffer use the local trace clock internally.
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds the tracing_is_on() interface to tell if the ring
buffer is turned on or not.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: clean up

While reviewing the ring buffer code, I thougth I saw a bug with

	if (!__raw_spin_trylock(&cpu_buffer->lock))
		goto out_unlock;

But I forgot that we use a variable "lock_taken" that is set if
the spinlock is taken, and only unlock it if that variable is set.

To avoid further confusion from other reviewers, this patch
renames the label out_unlock with out_reset, which is the more
appropriate name.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

While fixing some bugs in pahole (built-in.o files were not being
processed due to relocation problems) I found out about these packable
structures:

$ pahole --packable kernel/trace/ring_buffer.o  | grep ring
ring_buffer	72	64	8
ring_buffer_per_cpu	112	104	8

If we take a look at the current layout of struct ring_buffer we can see
that we have two 4 bytes holes.

$ pahole -C ring_buffer kernel/trace/ring_buffer.o
struct ring_buffer {
	unsigned int               pages;           /*     0     4 */
	unsigned int               flags;           /*     4     4 */
	int                        cpus;            /*     8     4 */

	/* XXX 4 bytes hole, try to pack */

	cpumask_var_t              cpumask;         /*    16     8 */
	atomic_t                   record_disabled; /*    24     4 */

	/* XXX 4 bytes hole, try to pack */

	struct mutex               mutex;           /*    32    32 */
	/* --- cacheline 1 boundary (64 bytes) --- */
	struct ring_buffer_per_cpu * * buffers;     /*    64     8 */

	/* size: 72, cachelines: 2, members: 7 */
	/* sum members: 64, holes: 2, sum holes: 8 */
	/* last cacheline: 8 bytes */
};

So, if I ask pahole to reorganize it:

$ pahole -C ring_buffer --reorganize kernel/trace/ring_buffer.o

struct ring_buffer {
	unsigned int               pages;           /*     0     4 */
	unsigned int               flags;           /*     4     4 */
	int                        cpus;            /*     8     4 */
	atomic_t                   record_disabled; /*    12     4 */
	cpumask_var_t              cpumask;         /*    16     8 */
	struct mutex               mutex;           /*    24    32 */
	struct ring_buffer_per_cpu * * buffers;     /*    56     8 */
	/* --- cacheline 1 boundary (64 bytes) --- */

	/* size: 64, cachelines: 1, members: 7 */
};   /* saved 8 bytes and 1 cacheline! */

We get it using just one 64 bytes cacheline.

To see what it did:

$ pahole -C ring_buffer --reorganize --show_reorg_steps \
	kernel/trace/ring_buffer.o | grep \/
/* Moving 'record_disabled' from after 'cpumask' to after 'cpus' */
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix these sparse warnings:

  kernel/trace/ring_buffer.c:70:37: warning: incorrect type in argument 2 (different signedness)
  kernel/trace/ring_buffer.c:84:39: warning: incorrect type in argument 2 (different signedness)
  kernel/trace/ring_buffer.c:96:43: warning: incorrect type in argument 2 (different signedness)
  kernel/trace/ring_buffer.c:2475:13: warning: incorrect type in argument 2 (different signedness)
  kernel/trace/ring_buffer.c:2475:13: warning: incorrect type in argument 2 (different signedness)
  kernel/trace/ring_buffer.c:2478:42: warning: incorrect type in argument 2 (different signedness)
  kernel/trace/ring_buffer.c:2478:42: warning: incorrect type in argument 2 (different signedness)
  kernel/trace/ring_buffer.c:2500:40: warning: incorrect type in argument 3 (different signedness)
  kernel/trace/ring_buffer.c:2505:44: warning: incorrect type in argument 2 (different signedness)
  kernel/trace/ring_buffer.c:2507:46: warning: incorrect type in argument 2 (different signedness)
  kernel/trace/trace.c:2130:40: warning: incorrect type in argument 3 (different signedness)
  kernel/trace/trace.c:2280:40: warning: incorrect type in argument 3 (different signedness)
Signed-off-by: NHannes Eder <hannes@hanneseder.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: clean up.

Fix typos in the comments.
Signed-off-by: NWenji Huang <wenji.huang@oracle.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: change API and init bpage when copy

ring_buffer_read_page()/rb_remove_entries() may be called for
a partially consumed page.

Add a parameter for rb_remove_entries() and make it update
cpu_buffer->entries correctly for partially consumed pages.

ring_buffer_read_page() now returns the offset to the next event.

Init the bpage's time_stamp when return value is 0.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: Fix bug

I found several very very curious line.
It's so curious that it may be brought by typing mistake.

When (cpu_buffer->reader_page == cpu_buffer->commit_page):

1) We haven't copied it for bpage is changed:
   bpage = cpu_buffer->reader_page->page;
   memcpy(bpage->data, cpu_buffer->reader_page->page->data + read ... )
2) We need update cpu_buffer->reader_page->read, but
   "cpu_buffer->reader_page += read;" is not right.

[
  This bug was a typo. The commit->reader_page is a page pointer
  and not an index into the page. The line should have been
  commit->reader_page->read += read.  The other changes
  by Lai are nice clean ups to the code.  - SDR
]
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: clean up

Now that a generic in_nmi is available, this patch removes the
special code in the ring_buffer and implements the in_nmi generic
version instead.

With this change, I was also able to rename the "arch_ftrace_nmi_enter"
back to "ftrace_nmi_enter" and remove the code from the ring buffer.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: prevent deadlock in NMI

The ring buffers are not yet totally lockless with writing to
the buffer. When a writer crosses a page, it grabs a per cpu spinlock
to protect against a reader. The spinlocks taken by a writer are not
to protect against other writers, since a writer can only write to
its own per cpu buffer. The spinlocks protect against readers that
can touch any cpu buffer. The writers are made to be reentrant
with the spinlocks disabling interrupts.

The problem arises when an NMI writes to the buffer, and that write
crosses a page boundary. If it grabs a spinlock, it can be racing
with another writer (since disabling interrupts does not protect
against NMIs) or with a reader on the same CPU. Luckily, most of the
users are not reentrant and protects against this issue. But if a
user of the ring buffer becomes reentrant (which is what the ring
buffers do allow), if the NMI also writes to the ring buffer then
we risk the chance of a deadlock.

This patch moves the ftrace_nmi_enter called by nmi_enter() to the
ring buffer code. It replaces the current ftrace_nmi_enter that is
used by arch specific code to arch_ftrace_nmi_enter and updates
the Kconfig to handle it.

When an NMI is called, it will set a per cpu variable in the ring buffer
code and will clear it when the NMI exits. If a write to the ring buffer
crosses page boundaries inside an NMI, a trylock is used on the spin
lock instead. If the spinlock fails to be acquired, then the entry
is discarded.

This bug appeared in the ftrace work in the RT tree, where event tracing
is reentrant. This workaround solved the deadlocks that appeared there.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: API change, cleanup

>From ring_buffer_{lock_reserve,unlock_commit}.

$ codiff /tmp/vmlinux.before /tmp/vmlinux.after
linux-2.6-tip/kernel/trace/trace.c:
  trace_vprintk              |  -14
  trace_graph_return         |  -14
  trace_graph_entry          |  -10
  trace_function             |   -8
  __ftrace_trace_stack       |   -8
  ftrace_trace_userstack     |   -8
  tracing_sched_switch_trace |   -8
  ftrace_trace_special       |  -12
  tracing_sched_wakeup_trace |   -8
 9 functions changed, 90 bytes removed, diff: -90

linux-2.6-tip/block/blktrace.c:
  __blk_add_trace |   -1
 1 function changed, 1 bytes removed, diff: -1

/tmp/vmlinux.after:
 10 functions changed, 91 bytes removed, diff: -91
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NFrédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix bad times of recent resets

The ring buffer needs to reset its timestamps when reseting of the
buffer, otherwise the timestamps are stale and might be used to
calculate times in the buffer causing funny timestamps to appear.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix bad times of recent resets

The ring buffer needs to reset its timestamps when reseting of the
buffer, otherwise the timestamps are stale and might be used to
calculate times in the buffer causing funny timestamps to appear.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>