Indicate to check variable location range in error message when we got
failed to find the variable.

Before this patch:

  $ perf probe --add 'generic_perform_write+118 bytes'
  Failed to find the location of bytes at this address.
   Perhaps, it has been optimized out.
    Error: Failed to add events.

After this patch:

  $ perf probe --add 'generic_perform_write+118 bytes'
  Failed to find the location of the 'bytes' variable at this address.
   Perhaps it has been optimized out.
   Use -V with the --range option to show 'bytes' location range.
    Error: Failed to add events.
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1431336304-16863-3-git-send-email-hekuang@huawei.com
[ Improve the error message based on lkml thread ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It is not easy for users to get the accurate byte offset or the line
number where a local variable can be probed.

With '--range' option, local variables in the scope of the probe point
are showed with a byte offset range, and can be added according to this
range information.

For example, there are some variables in the function
generic_perform_write():

  <generic_perform_write@mm/filemap.c:0>
  0  ssize_t generic_perform_write(struct file *file,
  1                                 struct iov_iter *i, loff_t pos)
  2  {
  3          struct address_space *mapping = file->f_mapping;
  4          const struct address_space_operations *a_ops = mapping->a_ops;
  ...
  42                 status = a_ops->write_begin(file, mapping, pos, bytes, flags,
                                               &page, &fsdata);
  44                 if (unlikely(status < 0))

But we fail when we try to probe the variable 'a_ops' at line 42 or 44.

  $ perf probe --add 'generic_perform_write:42 a_ops'
  Failed to find the location of a_ops at this address.
    Perhaps, it has been optimized out.

This is because the source code do not match the assembly, so a variable
may not be available in the source code line where it appears.

After this patch, we can lookup the accurate byte offset range of a
variable, 'INV' indicates that this variable is not valid at the given
point, but available in the scope:

  $ perf probe --vars 'generic_perform_write:42' --range
  Available variables at generic_perform_write:42
    @<generic_perform_write+141>
       [INV] ssize_t written @<generic_perform_write+[324-331]>
       [INV] struct address_space_operations*        a_ops   @<generic_perform_write+[55-61,170-176,223-246]>
       [VAL] (unknown_type)  fsdata  @<generic_perform_write+[70-307,346-411]>
       [VAL] loff_t  pos     @<generic_perform_write+[0-286,286-336,346-411]>
       [VAL] long int        status  @<generic_perform_write+[83-342,346-411]>
       [VAL] long unsigned int       bytes   @<generic_perform_write+[122-311,320-338,346-403,403-411]>
       [VAL] struct address_space*   mapping @<generic_perform_write+[35-344,346-411]>
       [VAL] struct iov_iter*        i       @<generic_perform_write+[0-340,346-411]>
       [VAL] struct page*    page    @<generic_perform_write+[70-307,346-411]>

Then it is more clear for us to add a probe with this variable:

  $ perf probe --add 'generic_perform_write+170 a_ops'
  Added new event:
    probe:generic_perform_write (on generic_perform_write+170 with a_ops)
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1431336304-16863-2-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Use struct strbuf instead of bare char[] to remove the length limitation
of variables in variable_list, so they will not disappear due to
overlength, and make preparation for adding more description for
variables.
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1431336304-16863-1-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

No need to test trace.evlist against NULL twice.
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1431347316-30401-2-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The -T/--thread option is supported only on --stdio mode (at least for
now).  So enforce the tty output if the option was requested.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1431184784-30525-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The 'perf record -s' and 'perf report -T' should be used together to see
per-thread event counts.  Document the relation of these commands.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1431184784-30525-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The last argument to strtok_r doesn't need to be initialized, its just a
placeholder to make this routine reentrant, but gcc doesn't know about
that and complains, breaking the build, fix it by setting it to NULL.

Fixes: 0e111156 ("perf kmem: Print gfp flags in human readable string")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iyyvkbnkrd9g19f6ta9zfkem@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch enables the uncore Memory Controller (IMC) PMU
support for Intel Broadwell-U (Model 61) mobile processors.
The IMC PMU enables measuring memory bandwidth.

To use with perf:
$ perf stat -a -I 1000 -e
uncore_imc/data_reads/,uncore_imc/data_writes/ sleep 10
Tested-by: NSonny Rao <sonnyrao@chromium.org>
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kan.liang@intel.com
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/20150423065642.GA4890@thinkpadSigned-off-by: NIngo Molnar <mingo@kernel.org>

Conflicts:
	tools/perf/builtin-kmem.c
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This patch enables RAPL counters (energy consumption counters)
support for Intel Broadwell-U processors (Model 61):

To use:

  $ perf stat -a -I 1000 -e power/energy-cores/,power/energy-pkg/,power/energy-ram/ sleep 10
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jacob.jun.pan@linux.intel.com
Cc: kan.liang@intel.com
Cc: peterz@infradead.org
Cc: sonnyrao@chromium.org
Link: http://lkml.kernel.org/r/20150423070709.GA4970@thinkpadSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  - 'perf probe' improvements: (Masami Hiramatsu)

    - Support glob wildcards for function name
    - Support $params special probe argument: Collect all function arguments
    - Make --line checks validate C-style function name.
    - Add --no-inlines option to avoid searching inline functions

  - Introduce new 'perf bench futex' benchmark: 'wake-parallel', to
    measure parallel waker threads generating contention for kernel
    locks (hb->lock). (Davidlohr Bueso)

Bug fixes:

  - Improve 'perf top' to survive much longer on high core count machines,
    more work needed to refcount more data structures besides 'struct thread'
    and fix more races. (Arnaldo Carvalho de Melo)

Infrastructure changes:

  - Move barrier.h mb/rmb/wmb API from tools/perf/ to kernel like tools/arch/
    hierarchy. (Arnaldo Carvalho de Melo)

  - Borrow atomic.h from the kernel, initially the x86 implementations
    with a fallback to gcc intrinsics for the other arches, all the kernel
    like framework in place for doing arch specific implementations,
    preferrably cloning what is in the kernel to the greater extent
    possible. (Arnaldo Carvalho de Melo)

  - Protect the 'struct thread' lifetime with a reference counter,
    and protect data structures that contains its instances with
    a mutex. (Arnaldo Carvalho de Melo

  - Disable libdw DWARF unwind when built with NO_DWARF (Naveen N. Rao)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

We get a linker error if we try to build with NO_DWARF since we build
util/unwind-libdw.c, but do not include -ldw
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1430306131-6780-1-git-send-email-naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Support glob wildcards for function name when adding new probes. This
will allow us to build caches of function-entry level information with
$params.

e.g.
  ----
  # perf probe --no-inlines --add 'kmalloc* $params'
  Added new events:
    probe:kmalloc_slab   (on kmalloc* with $params)
    probe:kmalloc_large_node (on kmalloc* with $params)
    probe:kmalloc_order_trace (on kmalloc* with $params)

  You can now use it in all perf tools, such as:

        perf record -e probe:kmalloc_order_trace -aR sleep 1

  # perf probe --list
    probe:kmalloc_large_node (on kmalloc_large_node@mm/slub.c with size flags node)
    probe:kmalloc_order_trace (on kmalloc_order_trace@mm/slub.c with size flags order)
    probe:kmalloc_slab   (on kmalloc_slab@mm/slab_common.c with size flags)
  ----
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150508010335.24812.19972.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add --no-inlines(--inlines) option to avoid searching inline functions.

Searching all functions which matches glob pattern can take a long time
and find a lot of inline functions.

With this option perf-probe searches target on the non-inlined
functions.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150508010333.24812.86568.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Introduce probe_conf global configuration parameters for probe-event and
probe-finder, and removes related parameters from APIs.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150508010330.24812.21095.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Use perf_probe_event.target field for the target binary instead of
passing it as an argument.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150508010328.24812.67887.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Wrap futex_wait around a loop and catch for EINTR.

Either a spurious wakeup occurred or a signal interrupted is, either way
we need to block again.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Link: http://lkml.kernel.org/r/1431110280-20231-2-git-send-email-dave@stgolabs.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The futex-wake benchmark only measures wakeups done within a single
process. While this has value in its own, it does not really generate
any hb->lock contention.

A new benchmark 'wake-parallel' is added, by extending the futex-wake
code such that we can measure parallel waker threads. The program output
shows the avg per-thread latency in order to complete its share of
wakeups:

Run summary [PID 13474]: blocking on 512 threads (at [private] futex 0xa88668), 8 threads waking up 64 at a time.

[Run 1]: Avg per-thread latency (waking 64/512 threads) in 0.6230 ms (+-15.31%)
[Run 2]: Avg per-thread latency (waking 64/512 threads) in 0.5175 ms (+-29.95%)
[Run 3]: Avg per-thread latency (waking 64/512 threads) in 0.7578 ms (+-18.03%)
[Run 4]: Avg per-thread latency (waking 64/512 threads) in 0.8944 ms (+-12.54%)
[Run 5]: Avg per-thread latency (waking 64/512 threads) in 1.1204 ms (+-23.85%)
Avg per-thread latency (waking 64/512 threads) in 0.7826 ms (+-9.91%)

Naturally, different combinations of numbers of blocking and waker
threads will exhibit different information.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Link: http://lkml.kernel.org/r/1431110280-20231-1-git-send-email-dave@stgolabs.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.

That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.

So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.

I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".

The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fixing bugs in 'perf top' where the used thread unsafe 'struct thread'
refcount implementation was falling apart because we really use two
threads.
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hil2hol294u5ntcuof4jhmn6@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Uses the arch/x86/ kernel code for x86_64/i386, fallbacking to a gcc
intrinsics implementation that has been tested in at least sparc64.

Will be used for reference counting in tools/perf.
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-knfpjowhgyh6x4z0kfuk389j@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.

The parisc stuff was just using the asm-generic/barrier.h, no need to
introduce a tools/arch/parisc/ tree just yet.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tfas9bs1gje0hfsvhqgrosd6@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jwcs4r1lo0ld8a4ricbe0zug@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-c5a8m8lbjuy0agep6giykxbz@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lp68dspbtjcwbpzd7x5c6zp5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cgfhreaejd7ohitdjccu9k2o@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4op0qdukegrdumyefz4icxk0@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vs2plxuph0ne3zcupijgjy9z@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f0d04b9x63grt30nahpw9ei0@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6xqb97k782wqp1r3v6jqayki@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

From the kernel's include/asm-generic/barrier.h, will be used by the
sh barrier.h implementation.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-emjznw0rjsmfyx2wfixss1gv@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To make it generally accessible by other tools/ projects, also will be
used in the tools/arch/*/include/asm/barrier.h files that are being
introduced now.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qnjdqwu3vcnt14vqmr6wu788@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zv4x77074resrkl4ayzf5e7d@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pk6f5x9vh8k2ebzhh9uj5wo2@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.

Other aches will follow, each in a cset.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vy6bqmsvm6puibpay2cy4wid@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

$params is similar to $vars but matches only function parameters not
local variables.

Thus, this is useful for tracing function parameter changing or tracing
function call with parameters.

Testing it:

 # perf probe tcp_sendmsg '$params'
 Added new event:
  probe:tcp_sendmsg    (on tcp_sendmsg with $params)

 You can now use it in all perf tools, such as:

	perf record -e probe:tcp_sendmsg -aR sleep 1

 # perf probe -l
  probe:tcp_sendmsg    (on tcp_sendmsg@acme/git/linux/net/ipv4/tcp.c with iocb sk msg size)
 # perf record -a -e probe:*
 press some random letters to generate TCP (sshd) traffic...

 ^C[ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.223 MB perf.data (6 samples) ]

 # perf script
   sshd 6385 [2] 3.907529: probe:tcp_sendmsg: iocb=0xffff8800ac4cfe70 sk=0xffff88042196c140 msg=0xffff8800ac4cfda8 size=0x24
   sshd 6385 [2] 4.138973: probe:tcp_sendmsg: iocb=0xffff8800ac4cfe70 sk=0xffff88042196c140 msg=0xffff8800ac4cfda8 size=0x24
   sshd 6385 [2] 4.378966: probe:tcp_sendmsg: iocb=0xffff8800ac4cfe70 sk=0xffff88042196c140 msg=0xffff8800ac4cfda8 size=0x24
   sshd 6385 [2] 4.603681: probe:tcp_sendmsg: iocb=0xffff8800ac4cfe70 sk=0xffff88042196c140 msg=0xffff8800ac4cfda8 size=0x24
   sshd 6385 [2] 4.818455: probe:tcp_sendmsg: iocb=0xffff8800ac4cfe70 sk=0xffff88042196c140 msg=0xffff8800ac4cfda8 size=0x24
   sshd 6385 [2] 5.043603: probe:tcp_sendmsg: iocb=0xffff8800ac4cfe70 sk=0xffff88042196c140 msg=0xffff8800ac4cfda8 size=0x24
 # cat /sys/kernel/debug/tracing/events/probe/tcp_sendmsg/format
 name: tcp_sendmsg
 ID: 1927
 format:
   field:unsigned short common_type;	offset:0;	size:2;	signed:0;
   field:unsigned char common_flags;	offset:2;	size:1;	signed:0;
   field:unsigned char common_preempt_count;	offset:3;	size:1;	signed:0;
   field:int common_pid;	offset:4;	size:4;	signed:1;

   field:unsigned long __probe_ip;	offset:8;	size:8;	signed:0;
   field:u64 iocb;	offset:16;	size:8;	signed:0;
   field:u64 sk;	offset:24;	size:8;	signed:0;
   field:u64 msg;	offset:32;	size:8;	signed:0;
   field:u64 size;	offset:40;	size:8;	signed:0;

 print fmt: "(%lx) iocb=0x%Lx sk=0x%Lx msg=0x%Lx size=0x%Lx", REC->__probe_ip, REC->iocb, REC->sk, REC->msg, REC->size
 #

 Do some system wide tracing of this probe + write syscalls:

 # perf trace -e write --ev probe:* --filter-pids 6385
  462.612 (0.010 ms): bash/19153 write(fd: 1</dev/pts/1>, buf: 0x7f7556c78000, count: 29               ) = 29
  462.701 (0.027 ms): sshd/19152 write(fd: 3<socket:[63117]>, buf: 0x7f78dd12e160, count: 68           ) ...
  462.701 (        ): probe:tcp_sendmsg:(ffffffff8163db30) iocb=0xffff8803ebec7e70 sk=0xffff88042196ab80 msg=0xffff8803ebec7da8 size=0x44)
  462.710 (0.035 ms): sshd/19152  ... [continued]: write()) = 68
  462.787 (0.009 ms): bash/19153 write(fd: 2</dev/pts/1>, buf: 0x7f7556c77000, count: 22               ) = 22
  462.865 (0.002 ms): sshd/19152 write(fd: 3<socket:[63117]>, buf: 0x7f78dd12e160, count: 68           ) ...
  462.865 (        ): probe:tcp_sendmsg:(ffffffff8163db30) iocb=0xffff8803ebec7e70 sk=0xffff88042196ab80 msg=0xffff8803ebec7da8 size=0x44)
  462.873 (0.010 ms): sshd/19152  ... [continued]: write()) = 68
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150506124653.4961.59806.stgit@localhost.localdomain
[ Add some examples to the changelog message showing how to use it ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Skip the kernel symbols which is out of .text, e.g. the functions
in .inittext. Those are found in debuginfo/kallsyms, but already
freed from memory.

e.g.
  ----
  # perf probe vfs_caches_init
  vfs_caches_init+0 is out of .text, skip it.
  Probe point 'vfs_caches_init' not found.
    Error: Failed to add events.
  ----
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150506124649.4961.56249.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix --line to check valid C-style function name and returns
a semantic error if it is not.

For example, previously, --line doesn't support lazy pattern
but it doesn't recognized as a semantic error.

  ----
  # perf probe -L 'func;return*:0-10'
  Specified source line is not found.
    Error: Failed to show lines.
  ----

With this patch, it is correctly handled as a semantic error.
  ----
  # perf probe -L 'func;return*:0-10'
  Semantic error :'func;return*' is not a valid function name.
  ...
  ----
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150506124647.4961.99473.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix to return 0 when positive value returned from probe command.

At least --vars can returns a positive value if it found a point.
  ----
  # perf probe --vars vfs_read && echo succeeded! || echo failed!
  Available variables at vfs_read
          @<vfs_read+0>
                  char*   buf
                  loff_t* pos
                  size_t  count
                  struct file*    file
  failed!
  ----

This fixes above problem.
  ----
  # perf probe --vars vfs_read && echo succeeded! || echo failed!
  Available variables at vfs_read
          @<vfs_read+0>
                  char*   buf
                  loff_t* pos
                  size_t  count
                  struct file*    file
  succeeded!
  ----
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150506124645.4961.56973.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix to pass O_APPEND by using bit-or with other flags, instead of
passing it as mode.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: hemant@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/20150506124642.4961.97878.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>