Add ctr(blowfish) speed test to receive results for blowfish x86_64 assembly
patch.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Rename blowfish to blowfish_generic so that assembler versions of blowfish
cipher can autoload. Module alias 'blowfish' is added.

Also fix checkpatch warnings.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Patch splits up the blowfish crypto routine into a common part (key setup)
which will be used by blowfish crypto modules (x86_64 assembly and generic-c).

Also fixes errors/warnings reported by checkpatch.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

As cryptd is depeneded on by other algorithms such as aesni-intel,
it needs to be registered before them.  When everything is built
as modules, this occurs naturally.  However, for this to work when
they are built-in, we need to use subsys_initcall in cryptd.
Tested-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

On Tue, Aug 16, 2011 at 03:22:34PM +1000, Stephen Rothwell wrote:
>
> After merging the final tree, today's linux-next build (powerpc
> allyesconfig) produced this warning:
>
> In file included from security/integrity/ima/../integrity.h:16:0,
>                  from security/integrity/ima/ima.h:27,
>                  from security/integrity/ima/ima_policy.c:20:
> include/crypto/sha.h:86:10: warning: 'struct shash_desc' declared inside parameter list
> include/crypto/sha.h:86:10: warning: its scope is only this definition or declaration, which is probably not what you want
>
> Introduced by commit 7c390170 ("crypto: sha1 - export sha1_update for
> reuse").  I guess you need to include crypto/hash.h in crypto/sha.h.

This patch fixes this by providing a declaration for struct shash_desc.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix a get/put_cpu() imbalance in the error case when qp == NULL
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This is an assembler implementation of the SHA1 algorithm using the
Supplemental SSE3 (SSSE3) instructions or, when available, the
Advanced Vector Extensions (AVX).

Testing with the tcrypt module shows the raw hash performance is up to
2.3 times faster than the C implementation, using 8k data blocks on a
Core 2 Duo T5500. For the smalest data set (16 byte) it is still 25%
faster.

Since this implementation uses SSE/YMM registers it cannot safely be
used in every situation, e.g. while an IRQ interrupts a kernel thread.
The implementation falls back to the generic SHA1 variant, if using
the SSE/YMM registers is not possible.

With this algorithm I was able to increase the throughput of a single
IPsec link from 344 Mbit/s to 464 Mbit/s on a Core 2 Quad CPU using
the SSSE3 variant -- a speedup of +34.8%.

Saving and restoring SSE/YMM state might make the actual throughput
fluctuate when there are FPU intensive userland applications running.
For example, meassuring the performance using iperf2 directly on the
machine under test gives wobbling numbers because iperf2 uses the FPU
for each packet to check if the reporting interval has expired (in the
above test I got min/max/avg: 402/484/464 MBit/s).

Using this algorithm on a IPsec gateway gives much more reasonable and
stable numbers, albeit not as high as in the directly connected case.
Here is the result from an RFC 2544 test run with a EXFO Packet Blazer
FTB-8510:

 frame size    sha1-generic     sha1-ssse3    delta
    64 byte     37.5 MBit/s    37.5 MBit/s     0.0%
   128 byte     56.3 MBit/s    62.5 MBit/s   +11.0%
   256 byte     87.5 MBit/s   100.0 MBit/s   +14.3%
   512 byte    131.3 MBit/s   150.0 MBit/s   +14.2%
  1024 byte    162.5 MBit/s   193.8 MBit/s   +19.3%
  1280 byte    175.0 MBit/s   212.5 MBit/s   +21.4%
  1420 byte    175.0 MBit/s   218.7 MBit/s   +25.0%
  1518 byte    150.0 MBit/s   181.2 MBit/s   +20.8%

The throughput for the largest frame size is lower than for the
previous size because the IP packets need to be fragmented in this
case to make there way through the IPsec tunnel.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Cc: Maxim Locktyukhin <maxim.locktyukhin@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Export the update function as crypto_sha1_update() to not have the need
to reimplement the same algorithm for each SHA-1 implementation. This
way the generic SHA-1 implementation can be used as fallback for other
implementations that fail to run under certain circumstances, like the
need for an FPU context while executing in IRQ context.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The completion callback will free the request so we must remove it from
the completion list before calling the callback.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Allow the crypto engines to be matched from device tree bindings.

Cc: devicetree-discuss@lists.ozlabs.org
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

For using the device tree probing we use a connection ID for the
clk_get() operation.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use a platform ID table and a single platform_driver.  It's neater and
makes the device tree addition easier and more consistent.  Rename the
match values to be inline with what they'll be in the device tree
bindings.  There aren't any current in-tree users of the existing device
names.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When loading aes via the module alias, a padlock module failing to
load due to missing hardware is not particularly notable.  With
v2.6.27-rc1~1107^2~14 (crypto: padlock - Make module loading quieter
when hardware isn't available, 2008-07-03), the padlock-aes module
suppresses the relevant messages when the "quiet" flag is in use; but
better to suppress this particular message completely, since the
administrator can already distinguish such errors by the absence of a
message indicating initialization failing or succeeding.

This avoids occasional messages in syslog of the form

	padlock_aes: VIA PadLock not detected.
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

exit_mm() sets ->mm == NULL then it does mmput()->exit_mmap() which
frees the memory.

However select_bad_process() checks ->mm != NULL before TIF_MEMDIE,
so it continues to kill other tasks even if we have the oom-killed
task freeing its memory.

Change select_bad_process() to check ->mm after TIF_MEMDIE, but skip
the tasks which have already passed exit_notify() to ensure a zombie
with TIF_MEMDIE set can't block oom-killer. Alternatively we could
probably clear TIF_MEMDIE after exit_mmap().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (23 commits)
  regulator: Improve WM831x DVS VSEL selection algorithm
  regulator: Bootstrap wm831x DVS VSEL value from ON VSEL if not already set
  regulator: Set up GPIO for WM831x VSEL before enabling VSEL mode
  regulator: Add EPEs to the MODULE_ALIAS() for wm831x-dcdc
  regulator: Fix WM831x DCDC DVS VSEL bootstrapping
  regulator: Fix WM831x regulator ID lookups for multiple WM831xs
  regulator: Fix argument format type errors in error prints
  regulator: Fix memory leak in set_machine_constraints() error paths
  regulator: Make core more chatty about some errors
  regulator: tps65910: Fix array access out of bounds bug
  regulator: tps65910: Add missing breaks in switch/case
  regulator: tps65910: Fix a memory leak in tps65910_probe error path
  regulator: TWL: Remove entry of RES_ID for 6030 macros
  ASoC: tlv320aic3x: Add correct hw registers to Line1 cross connect muxes
  regulator: Add basic per consumer debugfs
  regulator: Add rdev_crit() macro
  regulator: Refactor supply implementation to work as regular consumers
  regulator: Include the device name in the microamps_requested_ file
  regulator: Increase the limit on sysfs file names
  regulator: Properly register dummy regulator driver
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (60 commits)
  ext4: prevent memory leaks from ext4_mb_init_backend() on error path
  ext4: use EXT4_BAD_INO for buddy cache to avoid colliding with valid inode #
  ext4: use ext4_msg() instead of printk in mballoc
  ext4: use ext4_kvzalloc()/ext4_kvmalloc() for s_group_desc and s_group_info
  ext4: introduce ext4_kvmalloc(), ext4_kzalloc(), and ext4_kvfree()
  ext4: use the correct error exit path in ext4_init_inode_table()
  ext4: add missing kfree() on error return path in add_new_gdb()
  ext4: change umode_t in tracepoint headers to be an explicit __u16
  ext4: fix races in ext4_sync_parent()
  ext4: Fix overflow caused by missing cast in ext4_fallocate()
  ext4: add action of moving index in ext4_ext_rm_idx for Punch Hole
  ext4: simplify parameters of reserve_backup_gdb()
  ext4: simplify parameters of add_new_gdb()
  ext4: remove lock_buffer in bclean() and setup_new_group_blocks()
  ext4: simplify journal handling in setup_new_group_blocks()
  ext4: let setup_new_group_blocks() set multiple bits at a time
  ext4: fix a typo in ext4_group_extend()
  ext4: let ext4_group_add_blocks() handle 0 blocks quickly
  ext4: let ext4_group_add_blocks() return an error code
  ext4: rename ext4_add_groupblocks() to ext4_group_add_blocks()
  ...

Fix up conflict in fs/ext4/inode.c: commit aacfc19c ("fs: simplify
the blockdev_direct_IO prototype") had changed the ext4_ind_direct_IO()
function for the new simplified calling convention, while commit
dae1e52c ("ext4: move ext4_ind_* functions from inode.c to
indirect.c") moved the function to another file.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  xfs: Fix build breakage in xfs_iops.c when CONFIG_FS_POSIX_ACL is not set
  VFS: Reorganise shrink_dcache_for_umount_subtree() after demise of dcache_lock
  VFS: Remove dentry->d_lock locking from shrink_dcache_for_umount_subtree()
  VFS: Remove detached-dentry counter from shrink_dcache_for_umount_subtree()
  switch posix_acl_chmod() to umode_t
  switch posix_acl_from_mode() to umode_t
  switch posix_acl_equiv_mode() to umode_t *
  switch posix_acl_create() to umode_t *
  block: initialise bd_super in bdget()
  vfs: avoid call to inode_lru_list_del() if possible
  vfs: avoid taking inode_hash_lock on pipes and sockets
  vfs: conditionally call inode_wb_list_del()
  VFS: Fix automount for negative autofs dentries
  Btrfs: load the key from the dir item in readdir into a fake dentry
  devtmpfs: missing initialialization in never-hit case
  hppfs: missing include

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (37 commits)
  Improve slave/cyclic DMA engine documentation
  dmaengine: pl08x: handle the rest of enums in pl08x_width
  DMA: PL08x: cleanup selection of burst size
  DMA: PL08x: avoid recalculating cctl at each prepare
  DMA: PL08x: cleanup selection of buswidth
  DMA: PL08x: constify plchan->cd and plat->slave_channels
  DMA: PL08x: separately store source/destination cctl
  DMA: PL08x: separately store source/destination slave address
  DMA: PL08x: clean up LLI debugging
  DMA: PL08x: select LLI bus only once per LLI setup
  DMA: PL08x: remove unused constants
  ARM: mxs-dma: reset after disable channel
  dma: intel_mid_dma: remove redundant pci_set_drvdata calls
  dma: mxs-dma: fix unterminated platform_device_id table
  dmaengine: pl330: make platform data optional
  dmaengine: imx-sdma: return proper error if kzalloc fails
  pch_dma: Fix CTL register access issue
  dmaengine: mxs-dma: skip request_irq for NO_IRQ
  dmaengine/coh901318: fix slave submission semantics
  dmaengine/ste_dma40: allow memory buswidth/burst to be configured
  ...

Fix trivial whitespace conflict in drivers/dma/mv_xor.c

* 'gpiolib' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Hook up gpiolib support

* 'pstore-efi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  efivars: Introduce PSTORE_EFI_ATTRIBUTES
  efivars: Use string functions in pstore_write
  efivars: introduce utf16_strncmp
  efivars: String functions
  efi: Add support for using efivars as a pstore backend
  pstore: Allow the user to explicitly choose a backend
  pstore: Make "part" unsigned
  pstore: Add extra context for writes and erases
  pstore: Extend API for more flexibility in new backends

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kdb,kgdb: Allow arbitrary kgdb magic knock sequences
  kdb: Remove all references to DOING_KGDB2
  kdb,kgdb: Implement switch and pass buffer from kdb -> gdb
  kdb: cleanup unused variables missed in the original kdb merge

In ext4_mb_init(), if the s_locality_group allocation fails it will
currently cause the allocations made in ext4_mb_init_backend() to
be leaked.  Moving the ext4_mb_init_backend() allocation after the
s_locality_group allocation avoids that problem.
Signed-off-by: NYu Jian <yujian@whamcloud.com>
Signed-off-by: NAndreas Dilger <adilger@whamcloud.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: NYu Jian <yujian@whamcloud.com>
Signed-off-by: NAndreas Dilger <adilger@whamcloud.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The first packet that gdb sends when the kernel is in kdb mode seems
to change with every release of gdb.  Instead of continuing to add
many different gdb packets, change kdb to automatically look for any
thing that looks like a gdb packet.

Example 1 cold start test:
echo g > /proc/sysrq-trigger
$D#44+

Example 2 cold start test:
echo g > /proc/sysrq-trigger
$3#33

The second one should re-enter kdb's shell right away and is purely a
test.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

The DOING_KGDB2 was originally a state variable for one of the two
ways to automatically transition from kdb to kgdb.  Purge all these
variables and just use one single state for the transition.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

When switching from kdb mode to kgdb mode packets were getting lost
depending on the size of the fifo queue of the serial chip.  When gdb
initially connects if it is in kdb mode it should entirely send any
character buffer over to the gdbstub when switching connections.

Previously kdb was zero'ing out the character buffer and this could
lead to gdb failing to connect at all, or a lengthy pause could occur
on the initial connect.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

The BTARGS and BTSYMARG variables do not have any function in the
mainline version of kdb.
Reported-by: NTim Bird <tim.bird@am.sony.com>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  CIFS: Cleanup demupltiplex thread exiting code
  CIFS: Move mid search to a separate function
  CIFS: Move RFC1002 check to a separate function
  CIFS: Simplify socket reading in demultiplex thread
  CIFS: Move buffer allocation to a separate function
  cifs: remove unneeded variable initialization in cifs_reconnect_tcon
  cifs: simplify refcounting for oplock breaks
  cifs: fix compiler warning in CIFSSMBQAllEAs
  cifs: fix name parsing in CIFSSMBQAllEAs
  cifs: don't start signing too early
  cifs: trivial: goto out here is unnecessary
  cifs: advertise the right receive buffer size to the server

* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6:
  gpio_msm: Move Qualcomm MSM v2 gpio driver into drivers
  gpio_msm: Move Qualcomm v6 MSM driver into drivers
  msm: gpio: Fold register defs into C file
  msm: gpiomux: Move public API to public header
  msm: gpio: Remove ifdefs on gpio chip registers
  msm: gpio: Remove chip-specific register definitions
  msm: Remove chip-ifdefs for GPIO io mappings
  msm: gpio: Remove unsupported devices
  gpio: ab8500: fix MODULE_ALIAS for ab8500
  of/gpio: export of_gpio_simple_xlate

* 'for-3.1-rc1' of git://gitorious.org/linux-omap-dss2/linux: (31 commits)
  OMAP: DSS2: HDMI: fix hdmi clock name
  HACK: OMAP: DSS2: clk hack for OMAP2/3
  OMAP: DSS2: DSS: Fix context save/restore
  OMAP: DSS2: DISPC: Fix context save/restore
  OMAP: DSS2: Remove ctx loss count from dss.c
  OMAP: DSS2: Remove unused code from display.c
  OMAP: DSS2: DISPC: remove finegrained clk enables/disables
  OMAP: DSS2: Remove unused opt_clock_available
  OMAP: DSS2: Use PM runtime & HWMOD support
  OMAP: DSS2: Remove CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET
  OMAP: DSS2: Remove core_dump_clocks
  OMAP: DSS2: DPI: remove unneeded SYSCK enable/disable
  OMAP: DSS2: Use omap_pm_get_dev_context_loss_count to get ctx loss count
  OMAP: DSS2: rewrite use of context_loss_count
  OMAP: DSS2: Remove clk optimization at dss init
  OMAP: DSS2: Fix init and unit sequence
  OMAP: DSS2: Clean up probe for DSS & DSI
  OMAP: DSS2: Handle dpll4_m4_ck in dss_get/put_clocks
  OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4
  OMAP: DSS2: DSI: sync when disabling a display
  ...

* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: (39 commits)
  SH: static should be at beginning of declaration
  sh: move CLKDEV_xxx_ID macro to sh_clk.h
  sh: clock-shx3: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7786: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7785: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7757: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7366: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7343: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7722: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7724: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7366: modify I2C clock settings
  sh: clock-sh7343: modify I2C clock settings
  sh: clock-sh7723: modify I2C clock settings
  sh: clock-sh7722: modify I2C clock settings
  sh: clock-sh7724: modify I2C clock settings
  serial: sh-sci: Fix up pretty name printing for port IRQs.
  serial: sh-sci: Kill off per-port enable/disable callbacks.
  serial: sh-sci: Add missing module description/author bits.
  serial: sh-sci: Regtype probing doesn't need to be fatal.
  sh: Tidy up pre-clkdev clk_get() error handling.
  ...

Conflicts:
	drivers/gpio/Kconfig
	drivers/gpio/Makefile

Reviewed-and-Tested-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Reviewed-and-Tested-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Reviewed-and-Tested-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Move reading to separate function and remove csocket variable.

Also change semantic in a little: goto incomplete_rcv only when
we get -EAGAIN (or a familiar error) while reading rfc1002 header.
In this case we don't check for echo timeout when we don't get whole
header at once, as it was before.
Reviewed-and-Tested-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Introduce new helper functions which try kmalloc, and then fall back
to vmalloc if necessary, and use them for allocating and deallocating
s_flex_groups.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>