- 28 11月, 2011 9 次提交
-
-
由 Neal Cardwell 提交于
Allow callers to decide whether an ACK is a duplicate ACK. This is a prerequisite to allowing fastretrans_alert to be called from new contexts, such as the no_queue and old_ack code paths, from which we have extra info that tells us whether an ACK is a dupack. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
When using vlan 0 and UP 0, vlan header wasn't placed. Signed-off-by: NAmir Vadai <amirv@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
Device must be in promiscuous mode or DMAC must be same as the host MAC, or else packet will be dropped by the HW rx filtering. Signed-off-by: NAmir Vadai <amirv@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oren Duer 提交于
There are 2 capability bits for WOL, one for each port. WOL handlers were looking only on the second bit, regardless of the port. Signed-off-by: NOren Duer <oren@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
Moving to regular Completion Queue implementation (not collapsed) Completion for each transmitted packet is written to new entry. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
the MLX4_EN_WOL_DO_MODIFY flag which is defined through enum targets bit 63, this triggers a "cast truncate bits from constant value (8000000000000000 becomes 0)" warning from sparse, fix that by using define instead of enum. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Using RSS which takes into account UDP headers is controlled by a module param, fix the setting of the HW RSS context to align with that scheme. So far it was uncoditionally allowing hashing on the UDP headers. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Towards adding RSS support for IB drivers/application who use the mlx4 HW, make the RSS related definitions global and change the mlx4_en driver to use them. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Move the "ISDN4Linux interface" message from device registration, where it is emitted for each device, to driver registration, where it is emitted only once, for consistency with the CAPI variant. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 11月, 2011 31 次提交
-
-
由 David S. Miller 提交于
Documentation/networking/ifenslave.c: In function ‘if_getconfig’: Documentation/networking/ifenslave.c:508:14: warning: variable ‘mtu’ set but not used [-Wunused-but-set-variable] Documentation/networking/ifenslave.c:508:6: warning: variable ‘metric’ set but not used [-Wunused-but-set-variable] The purpose of this function is to simply print out the values it probes, so... Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Signed-off-by: NChas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rick Jones 提交于
Tx_fifo_errors are tracked in start_xmit_ for virtio_net, but not reported in the tallies returned by virtnet_stats(). Return them as the rx "sub-stats" rx_length_errors and rx_frame_errors are. Signed-off-by: NRick Jones <rick.jones2@hp.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
rx_msg is defined to have a 1 entry array at the end, so gcc warns: drivers/net/wireless/ray_cs.c: In function ‘rx_authenticate’: drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2439:15: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2452:16: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2453:18: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/ray_cs.c:2453:32: warning: array subscript is above array bounds [-Warray-bounds] Use a zero length array and rename to "ray_rx_msg" to make sure we hit all of the necessary cases. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
drivers/net/wireless/airo.c: In function ‘encapsulate’: drivers/net/wireless/airo.c:1421:15: warning: array subscript is above array bounds [-Warray-bounds] drivers/net/wireless/airo.c: In function ‘decapsulate’: drivers/net/wireless/airo.c:1509:16: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Dooks 提交于
Add ethtool EEPROM read/write support using the eeprom_93cx6 library instead of open-coding the functions. Depends on eeprom_93cx6 driver getting EEPROM write support. Signed-off-by: NBen Dooks <ben@simtec.co.uk> Signed-off-by: NSimtec Linux Team <linux@simtec.co.uk> [sboyd@codeaurora.org: Removed previous eeprom implementation] Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tristram Ha 提交于
When device is off it is under power saving mode. Changing the MAC address in that situation will result in the device not communicating as the first write to the MAC address register is not executed. Signed-off-by: NTristram Ha <Tristram.Ha@micrel.com> [ben@simtec.co.uk: cleaned up header] Signed-off-by: NBen Dooks <ben@simtec.co.uk> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Dooks 提交于
Add support for reading the MAC address from the system registers if there is an EEPROM present. This involves caching the KS_CCR register for later use (will also be useful for ETHTOOL support) and adding a print to say that there is an EEPROM present. Signed-off-by: NBen Dooks <ben@simtec.co.uk> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Dooks 提交于
Add support for writing data to EEPROM. Signed-off-by: NBen Dooks <ben@simtec.co.uk> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Linux Kernel <linux-kernel@vger.kernel.org> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Dooks 提交于
Some devices need to know if the data is to be output or read, so add a data direction into the eeprom structure to tell the driver whether the data line should be driven. The user in this case is the Micrel KS8851 which has a direction control for the EEPROM data line and thus needs to know whether to drive it (writing) or to tristate it for receiving. Signed-off-by: NBen Dooks <ben@simtec.co.uk> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
When non power of two MSIX vectors are given to driver, some RX queues are not utilized. Program RSS table in such a way that all queues are utilized. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
This new hash key gives better distribution of packets across RX queues. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Detect error in Lancer by polling a HW register and recover from this error if it is recoverable. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
When TX queues are created again after error recovery, netif_set_real_num_tx_queues() is invoked to update number of real TX queues created. rtnl lock needs to be held when invoking this routine. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
SR-IOV implementation is Lancer has changed in following ways - 1)PF driver assigns one MAC addresses for VF using COMMON_SET_IFACE_MAC_LIST. 2)VF driver queries its MAC address using COMMON_GET_IFACE_MAC_LIST command and assigns it to its interface. Signed-off-by: NMammatha Edhala <mammatha.edhala@emulex.com> Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
This file is now unused and should have been removed by commit 7c899432 ("bonding, ipv4, ipv6, vlan: Handle NETDEV_BONDING_FAILOVER like NETDEV_NOTIFY_PEERS"). Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Change the kconfig types to tristate and adjust the condition for declaring net_device::dsa_ptr to allow for this. Adjust the makefile so that if NET_DSA_MV88E6123_61_65=y and NET_DSA_MV88E6131=m or vice versa then both drivers are built-in. We could leave these options as bool and make NET_DSA_MV88E6XXX a user-selected option, but that would break existing configurations. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
These drivers share a lot of code, so if we make them modular they should be built into the same module. Therefore, link them together and merge their respective module init and exit functions. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
These files have circular dependencies, so if we make DSA modular then they must be built into the same module. Therefore, link them together and merge their respective module init and exit functions. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
eth_type_trans() will use these functions if DSA is enabled, which blocks building DSA as a module. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Conflicts: net/ipv4/inet_diag.c
-
由 Ben Hutchings 提交于
commit 88491d81 ("drivers/net: Kconfig & Makefile cleanup") changed the type of these options to bool, but they select code that could (and still can) be built as modules. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
The pmtu informations on the inetpeer are visible for output and input routes. On packet forwarding, we might propagate a learned pmtu to the sender. As we update the pmtu informations of the inetpeer on demand, the original sender of the forwarded packets might never notice when the pmtu to that inetpeer increases. So use the mtu of the outgoing device on packet forwarding instead of the pmtu to the final destination. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
We move all mtu handling from dst_mtu() down to the protocol layer. So each protocol can implement the mtu handling in a different manner. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
We plan to invoke the dst_opt->default_mtu() method unconditioally from dst_mtu(). So rename the method to dst_opt->mtu() to match the name with the new meaning. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
As it is, we return null as the default mtu of blackhole routes. This may lead to a propagation of a bogus pmtu if the default_mtu method of a blackhole route is invoked. So return dst->dev->mtu as the default mtu instead. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
-