Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

This reverts commit 308ab70c.

It breaks my FC6 test box.  /dev/pts is not mounted.  dmesg says

SELinux: mount invalid.  Same superblock, different security settings
for (dev devpts, type devpts)

Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NEric Paris <eparis@redhat.com>

Not considering sub filesystem has the following limitation. Support
for SELinux in FUSE is dependent on the particular userspace
filesystem, which is identified by the subtype. For e.g, GlusterFS,
a FUSE based filesystem supports SELinux (by mounting and processing
FUSE requests in different threads, avoiding the mount time
deadlock), whereas other FUSE based filesystems (identified by a
different subtype) have the mount time deadlock.

By considering the subtype of the filesytem in the SELinux policies,
allows us to specify a filesystem subtype, in the following way:

fs_use_xattr fuse.glusterfs gen_context(system_u:object_r:fs_t,s0);

This way not all FUSE filesystems are put in the same bucket and
subjected to the limitations of the other subtypes.
Signed-off-by: NAnand Avati <avati@redhat.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

The original implementation of the Smack IPv6 port based
local controls works most of the time using a sockaddr as
a temporary variable, but not always as it overflows in
some circumstances. The correct data is a sockaddr_in6.
A struct sockaddr isn't as large as a struct sockaddr_in6.
There would need to be casting one way or the other. This
patch gets it the right way.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

Currently the packet class in SELinux is not checked if there are no
SECMARK rules in the security or mangle netfilter tables.  Some systems
prefer that packets are always checked, for example, to protect the system
should the netfilter rules fail to load or if the nefilter rules
were maliciously flushed.

Add the always_check_network policy capability which, when enabled, treats
SECMARK as enabled, even if there are no netfilter SECMARK rules and
treats peer labeling as enabled, even if there is no Netlabel or
labeled IPSEC configuration.

Includes definition of "redhat1" SELinux policy capability, which
exists in the SELinux userpace library, to keep ordering correct.

The SELinux userpace portion of this was merged last year, but this kernel
change fell on the floor.
Signed-off-by: NChris PeBenito <cpebenito@tresys.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

When the BUG() macro is disabled at compile time it can cause some
problems in the SELinux netnode code: invalid return codes and
uninitialized variables.  This patch fixes this by making sure we take
some corrective action after the BUG() macro.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

Use a helper to determine if a superblock should have the seclabel flag
rather than doing it in the function.  I'm going to use this in the
security server as well.
Signed-off-by: NEric Paris <eparis@redhat.com>

Rather than passing pointers to memory locations, strings, and other
stuff just give up on the separation and give security_fs_use the
superblock.  It just makes the code easier to read (even if not easier to
reuse on some other OS)
Signed-off-by: NEric Paris <eparis@redhat.com>

Instead of having special code around the 'non-mount' seclabel mount option
just handle it like the mount options.
Signed-off-by: NEric Paris <eparis@redhat.com>

We only have 6 options, so char is good enough, but use a short as that
packs nicely.  This shrinks the superblock_security_struct just a little
bit.
Signed-off-by: NEric Paris <eparis@redhat.com>

Just to make it clear that we have mount time options and flags,
separate them.  Since I decided to move the non-mount options above
above 0x10, we need a short instead of a char.  (x86 padding says
this takes up no additional space as we have a 3byte whole in the
structure)
Signed-off-by: NEric Paris <eparis@redhat.com>

Currently we set the initialize and seclabel flag in one place.  Do some
unrelated printk then we unset the seclabel flag.  Eww.  Instead do the flag
twiddling in one place in the code not seperated by unrelated printk.  Also
don't set and unset the seclabel flag.  Only set it if we need to.
Signed-off-by: NEric Paris <eparis@redhat.com>

Just a flag rename as we prepare to make it not so special.
Signed-off-by: NEric Paris <eparis@redhat.com>

We had this random hard coded value of '8' in the code (I put it there)
for the number of bits to check for mount options.  This is stupid.  Instead
use the #define we already have which tells us the number of mount
options.
Signed-off-by: NEric Paris <eparis@redhat.com>

Instead of just hard coding a value, use the enum to out benefit.
Signed-off-by: NEric Paris <eparis@redhat.com>

We check if the fsname is proc and if so set the proc superblock security
struct flag.  We then check if the flag is set and use the string 'proc'
for the fsname instead of just using the fsname.  What's the point?  It's
always proc...  Get rid of the useless conditional.
Signed-off-by: NEric Paris <eparis@redhat.com>

The /sys/fs/selinux/policy file is not valid on big endian systems like
ppc64 or s390.  Let's see why:

static int hashtab_cnt(void *key, void *data, void *ptr)
{
	int *cnt = ptr;
	*cnt = *cnt + 1;

	return 0;
}

static int range_write(struct policydb *p, void *fp)
{
	size_t nel;
[...]
	/* count the number of entries in the hashtab */
	nel = 0;
	rc = hashtab_map(p->range_tr, hashtab_cnt, &nel);
	if (rc)
		return rc;
	buf[0] = cpu_to_le32(nel);
	rc = put_entry(buf, sizeof(u32), 1, fp);

So size_t is 64 bits.  But then we pass a pointer to it as we do to
hashtab_cnt.  hashtab_cnt thinks it is a 32 bit int and only deals with
the first 4 bytes.  On x86_64 which is little endian, those first 4
bytes and the least significant, so this works out fine.  On ppc64/s390
those first 4 bytes of memory are the high order bits.  So at the end of
the call to hashtab_map nel has a HUGE number.  But the least
significant 32 bits are all 0's.

We then pass that 64 bit number to cpu_to_le32() which happily truncates
it to a 32 bit number and does endian swapping.  But the low 32 bits are
all 0's.  So no matter how many entries are in the hashtab, big endian
systems always say there are 0 entries because I screwed up the
counting.

The fix is easy.  Use a 32 bit int, as the hashtab_cnt expects, for nel.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NPaul Moore <pmoore@redhat.com>

rootfs (ramfs) can support setting of security contexts
by userspace due to the vfs fallback behavior of calling
the security module to set the in-core inode state
for security.* attributes when the filesystem does not
provide an xattr handler.  No xattr handler required
as the inodes are pinned in memory and have no backing
store.

This is useful in allowing early userspace to label individual
files within a rootfs while still providing a policy-defined
default via genfs.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

Currently, the ebitmap_node structure has a fixed size of 32 bytes. On
a 32-bit system, the overhead is 8 bytes, leaving 24 bytes for being
used as bitmaps. The overhead ratio is 1/4.

On a 64-bit system, the overhead is 16 bytes. Therefore, only 16 bytes
are left for bitmap purpose and the overhead ratio is 1/2. With a
3.8.2 kernel, a boot-up operation will cause the ebitmap_get_bit()
function to be called about 9 million times. The average number of
ebitmap_node traversal is about 3.7.

This patch increases the size of the ebitmap_node structure to 64
bytes for 64-bit system to keep the overhead ratio at 1/4. This may
also improve performance a little bit by making node to node traversal
less frequent (< 2) as more bits are available in each node.
Signed-off-by: NWaiman Long <Waiman.Long@hp.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

While running the high_systime workload of the AIM7 benchmark on
a 2-socket 12-core Westmere x86-64 machine running 3.10-rc4 kernel
(with HT on), it was found that a pretty sizable amount of time was
spent in the SELinux code. Below was the perf trace of the "perf
record -a -s" of a test run at 1500 users:

  5.04%            ls  [kernel.kallsyms]     [k] ebitmap_get_bit
  1.96%            ls  [kernel.kallsyms]     [k] mls_level_isvalid
  1.95%            ls  [kernel.kallsyms]     [k] find_next_bit

The ebitmap_get_bit() was the hottest function in the perf-report
output.  Both the ebitmap_get_bit() and find_next_bit() functions
were, in fact, called by mls_level_isvalid(). As a result, the
mls_level_isvalid() call consumed 8.95% of the total CPU time of
all the 24 virtual CPUs which is quite a lot. The majority of the
mls_level_isvalid() function invocations come from the socket creation
system call.

Looking at the mls_level_isvalid() function, it is checking to see
if all the bits set in one of the ebitmap structure are also set in
another one as well as the highest set bit is no bigger than the one
specified by the given policydb data structure. It is doing it in
a bit-by-bit manner. So if the ebitmap structure has many bits set,
the iteration loop will be done many times.

The current code can be rewritten to use a similar algorithm as the
ebitmap_contains() function with an additional check for the
highest set bit. The ebitmap_contains() function was extended to
cover an optional additional check for the highest set bit, and the
mls_level_isvalid() function was modified to call ebitmap_contains().

With that change, the perf trace showed that the used CPU time drop
down to just 0.08% (ebitmap_contains + mls_level_isvalid) of the
total which is about 100X less than before.

  0.07%            ls  [kernel.kallsyms]     [k] ebitmap_contains
  0.05%            ls  [kernel.kallsyms]     [k] ebitmap_get_bit
  0.01%            ls  [kernel.kallsyms]     [k] mls_level_isvalid
  0.01%            ls  [kernel.kallsyms]     [k] find_next_bit

The remaining ebitmap_get_bit() and find_next_bit() functions calls
are made by other kernel routines as the new mls_level_isvalid()
function will not call them anymore.

This patch also improves the high_systime AIM7 benchmark result,
though the improvement is not as impressive as is suggested by the
reduction in CPU time spent in the ebitmap functions. The table below
shows the performance change on the 2-socket x86-64 system (with HT
on) mentioned above.

+--------------+---------------+----------------+-----------------+
|   Workload   | mean % change | mean % change  | mean % change   |
|              | 10-100 users  | 200-1000 users | 1100-2000 users |
+--------------+---------------+----------------+-----------------+
| high_systime |     +0.1%     |     +0.9%      |     +2.6%       |
+--------------+---------------+----------------+-----------------+
Signed-off-by: NWaiman Long <Waiman.Long@hp.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

Remove the BUG_ON() from selinux_skb_xfrm_sid() and propogate the
error code up to the caller.  Also check the return values in the
only caller function, selinux_skb_peerlbl_sid().
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

Remove the unused get_sock_isec() function and do some formatting
fixes.
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

Some basic simplification.
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

Signed-off-by: NPaul Moore <pmoore@redhat.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

Some basic simplification and comment reformatting.
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

Do some basic simplification and comment reformatting.
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

The SELinux labeled IPsec code state management functions have been
long neglected and could use some cleanup and consolidation.
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

The xfrm_state_alloc_security() LSM hook implementation is really a
multiplexed hook with two different behaviors depending on the
arguments passed to it by the caller.  This patch splits the LSM hook
implementation into two new hook implementations, which match the
LSM hooks in the rest of the kernel:

 * xfrm_state_alloc
 * xfrm_state_alloc_acquire

Also included in this patch are the necessary changes to the SELinux
code; no other LSMs are affected.
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

Create a file_path_has_perm() function that is like path_has_perm() but
instead takes a file struct that is the source of both the path and the
inode (rather than getting the inode from the dentry in the path).  This
is then used where appropriate.

This will be useful for situations like unionmount where it will be
possible to have an apparently-negative dentry (eg. a fallthrough) that is
open with the file struct pointing to an inode on the lower fs.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Replace a bunch of file->dentry->d_inode refs with file_inode().

In __fput(), use file->f_inode instead so as not to be affected by any tricks
that file_inode() might grow.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Before modifying an EVM protected extended attribute or any other
metadata included in the HMAC calculation, the existing 'security.evm'
is verified.  This patch adds calls to integrity_audit_msg() to audit
integrity metadata failures.
Reported-by: NSven Vermeulen <sven.vermeulen@siphos.be>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

This patch moves the integrity_audit_msg() function and defintion to
security/integrity/, the parent directory, renames the 'ima_audit'
boot command line option to 'integrity_audit', and fixes the Kconfig
help text to reflect the actual code.

Changelog:
- Fixed ifdef inclusion of integrity_audit_msg() (Fengguang Wu)
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The existing NFSv4 xattr handlers do not accept xattr calls to the security
namespace. This patch extends these handlers to accept xattrs from the security
namespace in addition to the default NFSv4 ACL namespace.
Acked-by: NJames Morris <james.l.morris@oracle.com>
Signed-off-by: NMatthew N. Dodd <Matthew.Dodd@sparta.com>
Signed-off-by: NMiguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: NPhua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: NKhin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch implements the client transport and handling support for labeled
NFS. The patch adds two functions to encode and decode the security label
recommended attribute which makes use of the LSM hooks added earlier. It also
adds code to grab the label from the file attribute structures and encode the
label to be sent back to the server.
Acked-by: NJames Morris <james.l.morris@oracle.com>
Signed-off-by: NMatthew N. Dodd <Matthew.Dodd@sparta.com>
Signed-off-by: NMiguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: NPhua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: NKhin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: NSteve Dickson <steved@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

There currently doesn't exist a labeling type that is adequate for use with
labeled NFS. Since NFS doesn't really support xattrs we can't use the use xattr
labeling behavior. For this we developed a new labeling type. The native
labeling type is used solely by NFS to ensure NFS inodes are labeled at runtime
by the NFS code instead of relying on the SELinux security server on the client
end.
Acked-by: NEric Paris <eparis@redhat.com>
Acked-by: NJames Morris <james.l.morris@oracle.com>
Signed-off-by: NMatthew N. Dodd <Matthew.Dodd@sparta.com>
Signed-off-by: NMiguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: NPhua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: NKhin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

There is no way to differentiate if a text mount option is passed from user
space or the kernel. A flags field is being added to the
security_sb_set_mnt_opts hook to allow for in kernel security flags to be sent
to the LSM for processing in addition to the text options received from mount.
This patch also updated existing code to fix compilation errors.
Acked-by: NEric Paris <eparis@redhat.com>
Acked-by: NJames Morris <james.l.morris@oracle.com>
Signed-off-by: NDavid P. Quigley <dpquigl@tycho.nsa.gov>
Signed-off-by: NMiguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: NPhua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: NKhin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The interface to request security labels from user space is the xattr
interface. When requesting the security label from an NFS server it is
important to make sure the requested xattr actually is a MAC label. This allows
us to make sure that we get the desired semantics from the attribute instead of
something else such as capabilities or a time based LSM.
Acked-by: NEric Paris <eparis@redhat.com>
Acked-by: NJames Morris <james.l.morris@oracle.com>
Signed-off-by: NMatthew N. Dodd <Matthew.Dodd@sparta.com>
Signed-off-by: NMiguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: NPhua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: NKhin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

There is a time where we need to calculate a context without the
inode having been created yet. To do this we take the negative dentry and
calculate a context based on the process and the parent directory contexts.
Acked-by: NEric Paris <eparis@redhat.com>
Acked-by: NJames Morris <james.l.morris@oracle.com>
Signed-off-by: NMatthew N. Dodd <Matthew.Dodd@sparta.com>
Signed-off-by: NMiguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: NPhua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: NKhin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: NSteve Dickson <steved@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Bug report: https://tizendev.org/bugs/browse/TDIS-3891

The reason is userspace libsmack only use "smackfs/cipso2" long-label interface,
but the code's logical is still for orginal fixed length label. Now update
smack_cipso_apply() to support flexible label (<=256 including tailing '\0')

There is also a bug in kernel/security/smack/smackfs.c:
When smk_set_cipso() parsing the CIPSO setting from userspace, the offset of
CIPSO level should be "strlen(label)+1" instead of "strlen(label)"
Signed-off-by: NPassion,Zhao <passion.zhao@intel.com>

The SELinux labeled IPsec code was improperly handling its reference
counting, dropping a reference on a delete operation instead of on a
free/release operation.
Reported-by: NOndrej Moris <omoris@redhat.com>
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>