The perfect solution for psr_exit is the hardware tracking the changes and
doing the psr exit by itself. This scenario works for HSW and BDW with some
environments like Gnome and Wayland.

However there are many other scenarios that this isn't true. Mainly one right
now is KDE users on HSW and BDW with PSR on. User would miss many screen
updates. For instances any key typed could be seen only when mouse cursor is
moved. So this patch introduces the ability of trigger PSR exit on kernel side
on some common cases that.

Most of the cases are coverred by psr_exit at set_domain. The remaining cases
are coverred by triggering it at set_domain, busy_ioctl, sw_finish and
mark_busy.

The downside here might be reducing the residency time on the cases this
already work very wall like Gnome environment. But so far let's get focused
on fixinge issues sio PSR couild be used for everybody and we could even
get it enabled by default. Later we can add some alternatives to choose the
level of PSR efficiency over boot flag of even over crtc property.

v2: remove exit from connector_dpms. Daniel pointed this is the wrong way and
also this isn't needed for BDW and HSW anyway.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Early revs didn't have PPGTT support, so disable there.

v2: add debug msg when disabling on early stepping
v3: enable on other B3 packages as well (untested) (Ville)

References: https://bugs.freedesktop.org/show_bug.cgi?id=79669
References: https://bugs.freedesktop.org/show_bug.cgi?id=79670Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

CHECK   linux/drivers/gpu/drm/i915/i915_gem_execbuffer.c
linux/drivers/gpu/drm/i915/i915_gem_execbuffer.c:1529:47: warning: incorrect type in initializer (different address spaces)
linux/drivers/gpu/drm/i915/i915_gem_execbuffer.c:1529:47:    expected struct drm_i915_gem_exec_object2 *user_exec_list
linux/drivers/gpu/drm/i915/i915_gem_execbuffer.c:1529:47:    got void [noderef] <asn:1>*
linux/drivers/gpu/drm/i915/i915_gem_execbuffer.c:1533:61: warning: incorrect type in argument 1 (different address spaces)
linux/drivers/gpu/drm/i915/i915_gem_execbuffer.c:1533:61:    expected void [noderef] <asn:1>*dst
linux/drivers/gpu/drm/i915/i915_gem_execbuffer.c:1533:61:    got unsigned long long *<noident>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Knowing the device stepping may be crucial in analyzing problems. Since
we always ask bug reporters for dmegs with drm.debug=0xe (or something)
it would be nice if the PCI revision is already included in the dump.
Avoids having to ask for lspci output as well.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

obj->framebuffer_references isn't an atomic_t so the decrement needs to
be protected by some lock. struct_mutex seems like the appropriate lock
here, and we may already take it for the obj unref anyway.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On the current structure HSW doesn't support PSR with sprites enabled
but sprites can be enabled after PSR was enabled what would cause
user to miss screen updates.

v2: move it to update_plane.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Broadwell has a PSR per transcoder, where DDIA supports
link disable and link standby modes while other
transcoders only support link standby.
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When link is in stand by and PSR exit is triggered by a primary or sprite
plane flip this mode allows only one single updated frame to be send to
display than get back to PSR immediately.
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Also do not cache aux info. That info could be related to another panel.
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Being more conservative by enabling PSR only on psr_enable function.
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Let's be more conservative and protect platforms that don't
support PSR from unecessary interactions.
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The DRM core will translate calls to legacy cursor ioctls into universal
cursor calls automatically, so there's no need to maintain the legacy
cursor support.  This greatly simplifies the transition since we don't
have to handle reference counting differently depending on which cursor
interface was called.

The aim here is to transition to the universal plane interface with
minimal code change.  There's a lot of cleanup that can be done (e.g.,
using state stored in crtc->cursor->fb rather than intel_crtc) that is
left to future patches.

v4:
 - Drop drm_gem_object_unreference() that is no longer needed now that
   we receive the GEM obj directly rather than looking up the ID.
v3:
 - Pass cursor obj to intel_crtc_cursor_set_obj() if cursor fb changes,
   even if 'visible' is false.  intel_crtc_cursor_set_obj() will notice
   that the cursor isn't visible and disable it properly, but we still
   need to get intel_crtc->cursor_addr set properly so that we behave
   properly if the cursor becomes visible again in the future without
   changing the cursor buffer (noted by Chris Wilson and verified
   via i-g-t kms_cursor_crc).
 - s/drm_plane_init/drm_universal_plane_init/.  Due to type
   compatibility between enum and bool, everything actually works
   correctly with the wrong init call, except for the type of plane that
   gets exposed to userspace (it shows up as type 'primary' rather than
   type 'cursor').
v2:
 - Remove duplicate dimension checks on cursor
 - Drop explicit cursor disable from crtc destroy (fb & plane
   destruction will take care of that now)
 - Use DRM plane helper to check update parameters

Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Refactor cursor buffer setting such that the code to actually update the
cursor lives in a new function, intel_crtc_cursor_set_obj(), and takes
a GEM object as a parameter.  The existing legacy cursor ioctl handler,
intel_crtc_cursor_set() will now perform the userspace handle lookup and
then call this new function.

This refactoring is in preparation for the universal plane cursor
support where we'll want to update the cursor with an actual GEM buffer
object (obtained via drm_framebuffer) rather than a userspace handle.

v2:  Drop obvious kerneldoc and replace with note about function's
     reference consumption
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Universal plane support had placeholders for cursor planes, but didn't
actually do anything with them.  Save the cursor plane reference inside
the crtc and update the cursor plane parameter from void* to drm_plane.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To disable a plane, userspace passes in an framebuffer id of 0. This
causes us to pass CRTC == NULL to setplane_internal, who promptly
deferences it to grab the struct drm_device. Oops.

[ 1296.467327] BUG: unable to handle kernel NULL pointer dereference at   (null)
[ 1296.467332] IP: [<c134dc51>] setplane_internal+0x11/0x280
[ 1296.467338] *pde = 00000000
[ 1296.467341] Oops: 0000 [#1] SMP
[ 1296.467344] Modules linked in: ccm bnep bluetooth snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_codec_generic snd_hda_intel arc4 iwldvm snd_hda_controller snd_hda_codec mac80211 snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer iwlwifi sdhci_pci snd cfg80211 x86_pkg_temp_thermal hp_wmi sdhci sparse_keymap mmc_core crc32c_intel rfkill microcode hp_accel lpc_ich lis3lv02d wmi mfd_core serio_raw input_polldev soundcore e1000e ptp pps_core
[ 1296.467367] CPU: 1 PID: 672 Comm: Xorg Tainted: G        W     3.15.0-rc8+ #351
[ 1296.467369] Hardware name: Hewlett-Packard HP ProBook 6360b/1620, BIOS 68SCF Ver. B.42 12/29/2010
[ 1296.467371] task: f423b5c0 ti: c2332000 task.ti: c2332000
[ 1296.467374] EIP: 0060:[<c134dc51>] EFLAGS: 00013286 CPU: 1
[ 1296.467376] EIP is at setplane_internal+0x11/0x280
[ 1296.467378] EAX: 00000000 EBX: c2333e90 ECX: 00000000 EDX: f3165600
[ 1296.467380] ESI: f430f400 EDI: 00000000 EBP: c2333e14 ESP: c2333dd4
[ 1296.467382]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 1296.467384] CR0: 80050033 CR2: 00000000 CR3: 00159000 CR4: 000407d0
[ 1296.467385] Stack:
[ 1296.467387]  000200da 00000002 c2333de8 c15dc4a0 f430f400 c2333e00 c134c54f eeeeeeee
[ 1296.467391]  f430f400 00000007 f416b480 c2333e14 00000000 c2333e90 f430f400 00000000
[ 1296.467396]  c2333e4c c1350aed 00000000 00000000 00000000 00000000 00000000 00000000
[ 1296.467400] Call Trace:
[ 1296.467406]  [<c15dc4a0>] ? mutex_lock+0x10/0x28
[ 1296.467408]  [<c134c54f>] ? _object_find+0x5f/0x90
[ 1296.467413]  [<c1350aed>] drm_mode_setplane+0x10d/0x1f0
[ 1296.467416]  [<c13509e0>] ? drm_mode_getplane+0x100/0x100
[ 1296.467420]  [<c1342e4d>] drm_ioctl+0x1bd/0x4f0
[ 1296.467423]  [<c13509e0>] ? drm_mode_getplane+0x100/0x100
[ 1296.467427]  [<c111c023>] ? handle_mm_fault+0x5d3/0xb30
[ 1296.467431]  [<c1118f31>] ? tlb_finish_mmu+0x11/0x40
[ 1296.467435]  [<c1342c90>] ? drm_ioctl_flags+0x40/0x40
[ 1296.467438]  [<c11593d2>] do_vfs_ioctl+0x2f2/0x4d0
[ 1296.467443]  [<c1226512>] ? inode_has_perm.isra.32+0x32/0x40
[ 1296.467446]  [<c122662f>] ? file_has_perm+0x7f/0x90
[ 1296.467449]  [<c1226fec>] ? selinux_file_ioctl+0x4c/0xf0
[ 1296.467452]  [<c1159610>] SyS_ioctl+0x60/0x90
[ 1296.467456]  [<c15e578c>] sysenter_do_call+0x12/0x22
[ 1296.467457] Code: 3f cf ff eb dd ba 3f 00 00 00 b8 d9 c9 7f c1 e8 e6 3f cf ff eb d9 8d 74 26 00 55 89 e5 57 56 53 83 ec 34 66 66 66 66 90 89 45 f0 <8b> 00 85 c9 89 d6 89 cb 89 45 ec 0f 84 16 01 00 00 8b 45 f0 e8
[ 1296.467485] EIP: [<c134dc51>] setplane_internal+0x11/0x280 SS:ESP 0068:c2

Fixes regression from
commit b02fd7fd8a541c3d590bfdda23365a927b507ceb
Author: Matt Roper <matthew.d.roper@intel.com>
Date:   Tue Jun 10 08:28:10 2014 -0700

    drm: Support legacy cursor ioctls via universal planes when possible (v4)

While at it move the plane parameter to the first position in
setplane_internal since that's the main object we're manipulating.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Pallavi G<pallavi.g@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
[danvet: Add note about parameter reordering.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If drivers support universal planes and have registered a cursor plane
with the DRM core, we should use that universal plane support when
handling legacy cursor ioctls.  Drivers that transition to universal
planes won't have to maintain separate legacy ioctl handling; drivers
that don't transition to universal planes will continue to operate
without any change to behavior.

Note that there's a bit of a mismatch between the legacy cursor ioctls
and the universal plane API's --- legacy ioctl's use driver buffer
handles directly whereas the universal plane API takes drm_framebuffers.
Since there's no way to recover the driver handle from a
drm_framebuffer, we can implement legacy ioctl's in terms of universal
plane interfaces, but cannot implement universal plane interfaces in
terms of legacy ioctls.  Specifically, there's no way to create a
general cursor helper in the way we previously created a primary plane
helper.

It's important to land this patch before any patches that add universal
cursor support to individual drivers so that drivers don't have to worry
about juggling two different styles of reference counting for cursor
buffers when userspace mixes and matches legacy and universal cursor
calls.  With this patch, a driver that switches to universal cursor
support may assume that all cursor buffers are wrapped in a
drm_framebuffer and can rely on framebuffer reference counting for all
cursor operations.

v4:
 - Add comments pointing out setplane_internal's reference-eating
   semantics.
v3:
 - Drop drm_mode_rmfb() call that is no longer needed now that we're
   using setplane_internal(), which takes care of deref'ing the
   appropriate framebuffer.
v2:
 - Use new add_framebuffer_internal() function to create framebuffer
   rather than trying to call directly into the ioctl interface and
   look up the handle returned.
 - Use new setplane_internal() function to update the cursor plane
   rather than calling through the ioctl interface.  Note that since
   we're no longer looking up an fb_id, no extra reference will be
   taken here.
 - Grab extra reference to fb under lock in !BO case to avoid issues
   where racing userspace could cause the fb to be destroyed out from
   under us after we grab the fb pointer.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Refactor DRM setplane code into a new setplane_internal() function that
takes DRM objects directly as parameters rather than looking them up by
ID.  We'll use this in a future patch when we implement legacy cursor
ioctls on top of the universal plane interface.

v3:
 - Move integer overflow checking from setplane_internal to setplane
   ioctl.  The upcoming legacy cursor support via universal planes needs
   to maintain current cursor ioctl semantics and not return error for
   these extreme values (found via intel-gpu-tools kms_cursor_crc test).
v2:
 - Allow planes to be disabled without a valid crtc again (and add
   mention of this to setplane's kerneldoc, since it doesn't seem to be
   mentioned anywhere else).
 - Reformat some parameter line wrap
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Refactor DRM framebuffer creation into a new function that returns a
struct drm_framebuffer directly.  The upcoming universal cursor support
will want to create framebuffers internally to wrap cursor buffers, so
we want to be able to share that framebuffer creation with the
drm_mode_addfb2 ioctl handler.

v2: Take struct drm_mode_fb_cmd2 parameter directly rather than void*
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Correct a merge mishap in commit e4443e45.

Wa*:chv belongs in cherryview_enable_rps, not gen8_enable_rps.
Signed-off-by: NTom O'Rourke <Tom.O'Rourke@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These do not exist anymore.

Spotted while reading through intel_ringbuffer.c
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Inserting additional PTEs has no side-effect for us as the pfn are fixed
for the entire time the object is resident in the global GTT. The
downside is that we pay the entire cost of faulting the object upon the
first hit, for which we in return receive the benefit of removing the
per-page faulting overhead.

On an Ivybridge i7-3720qm with 1600MHz DDR3, with 32 fences,
Upload rate for 2 linear surfaces:	8127MiB/s -> 8134MiB/s
Upload rate for 2 tiled surfaces:	8607MiB/s -> 8625MiB/s
Upload rate for 4 linear surfaces:	8127MiB/s -> 8127MiB/s
Upload rate for 4 tiled surfaces:	8611MiB/s -> 8602MiB/s
Upload rate for 8 linear surfaces:	8114MiB/s -> 8124MiB/s
Upload rate for 8 tiled surfaces:	8601MiB/s -> 8603MiB/s
Upload rate for 16 linear surfaces:	8110MiB/s -> 8123MiB/s
Upload rate for 16 tiled surfaces:	8595MiB/s -> 8606MiB/s
Upload rate for 32 linear surfaces:	8104MiB/s -> 8121MiB/s
Upload rate for 32 tiled surfaces:	8589MiB/s -> 8605MiB/s
Upload rate for 64 linear surfaces:	8107MiB/s -> 8121MiB/s
Upload rate for 64 tiled surfaces:	2013MiB/s -> 3017MiB/s
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: "Goel, Akash" <akash.goel@intel.com>
Testcasee: igt/gem_fence_upload/performance
Reviewed-by: NBrad Volkin <bradley.d.volkin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Adding missing Display mmio reg offset.

Credits-to: Laws, Philip <philip.laws@intel.com>
Cc: He, Shuang <shuang.he@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Atm, the forcewake refcount will be incorrectly set to zero during
system suspend if there is any reference held via the
i915_forcewake_user debugfs entry.

Fix this by simply not zeroing the sw counters during suspend and
restoring the original state using them. Note that the only other
places where we zeroed the counters were driver load and unload time,
where it was redundant anyway.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78059Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If the timer putting the last forcewake refcount was pending and we
canceled it, we'll leak the corresponding forcewake and RPM references.

v2:
- do the ptr casting at the caller instead of adding a separate helper
  for this (Chris)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

pipe_name() returns an ascii character.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add Broadwell support to i915_frequency_info
and extend i915_max|min_freq_get|set to (gen >= 6).

v2: generalized support for i915_max|min_freq_get|set (Daniel).
Signed-off-by: NTom O'Rourke <Tom.O'Rourke@intel.com>
Reviewed-by: NJeff McGee <jeff.mcgee@intel.com>
[danvet: Fix checkpatch fail.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Certain DVO chips (ns2501 for example) don't like to be accessed unless
the PLL is running. Simply skip the DVO get_hw_state if the DVO port
is disabled.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Using names initializers when filling out the watermark structs
saves you from having go look up the struct definition every
single time.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that we have a release hook into i915_gem_object_free, we can move
the explicit call to the internal stolen function and hook it up
throught the callback instead.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Otherwise we incur an unsightly WARNING. The mutex locking is a bit
overkill, but it curbs races and eventially we might grow a locking
check in the vblank wait code to make sure the right crtc lock is
held.

This is fallout from

commit 93937071
Author:     Jesse Barnes <jbarnes@virtuousgeek.org>
AuthorDate: Fri Apr 4 16:12:09 2014 -0700

    drm/i915: warn when a vblank wait times out

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79612Tested-by: NGuo Jinxian <jinxianx.guo@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Rebase on top of drm core ww locking changes.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For no reason at all the public docs lack them, and Dave needs them
for his hpd interrupt rework.

Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Replaced ever growing switch for gen version with chained conditionals.
Futre gen's only need to add a new one if they require something different.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NRobert Beckett <robert.beckett@intel.com>
[danvet: Picked from internal tree and white-wash commit message.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Those LUT where defined in the original sprite patch introducing intel_plane,
but were never used.

  commit b840d907
  Author: Jesse Barnes <jbarnes@virtuousgeek.org>
  Date:   Tue Dec 13 13:19:38 2011 -0800

    drm/i915: add SNB and IVB video sprite support v6
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
[danvet: Pimp commit message as suggested by Damien]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Keeping track of the power domains is a bit messy since crtc->active
is currently updated by the platform hooks, but we need to be aware of
which state transition exactly is going on. Maybe we simply need to
shovel all the power domain handling down into platform code to
simplify this. But doing that requires some more auditing since
currently the ->mode_set callbacks still read some random registers
(to e.g. figure out the reference clocks).

Also note that intel_crtc_update_dpms is always call first/last even
for encoders which have their own dpms functions. Hence we really only
need to update this place here.

Being a quick "does it blow up?" run not really tested yet.

v2: Don't do runtime PM in the DPMS hooks for HAS_DDI platforms since
that is stalled. Also add a comment to explain what's going on.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Working for real this time.  i915_ppgtt_info has all sorts of good stuff
in it and X is running nicely on top.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Conceptually, the MIPI registers are addressed by the MIPI transcoder
index, not the pipe. It doesn't matter right now, because there's a
1:1 relationship between pipes and MIPI transcoders, but that change
allows us to break that link in the future

V1: Created new patch to address Damien's review comment.
Replacing _PIPE calls to _TRANSCODER calls
V2: Re-basing on patch 2
V3: Re-basing on patch 2
V4: Re-basing on patch 2
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Re-define MIPI register definitions in such a way that most of
the existing DSI code can be re-used for future platforms. Register
definitions are re-written using MMIO offset variable, so that without
changing the existing sequence, same code can be generically applied.

V4: Addressing review comments by Damien and Ville, splitting into two patches
This patch removes all the un-necessary formatting changes from previous patch.
V5: Removed 80 char limit formatting for existing MIPI regs
V6: Removed extra space, change one definition
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Fixed several double space pointer notations, and added one newline
Signed-off-by: NRobin Schroer <sulamiification@gmail.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>