The core API has changed so that devices that do not have a global
DMA lkey automatically create an mr, per-PD, and make that lkey
available. The global DMA lkey interface is going away in favor of
the per-PD DMA lkey.

The per-PD DMA lkey is always available. Convert xprtrdma to use the
device's per-PD DMA lkey for regbufs, no matter which memory
registration scheme is in use.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: linux-nfs <linux-nfs@vger.kernel.org>
Acked-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Untangle the end of rpcrdma_ia_open() by moving DMA MR set-up, which
is different for each registration method, to the .ro_open functions.

This is refactoring only. No behavior change is expected.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

An RPC can exit at any time. When it does so, xprt_rdma_free() is
called, and it calls ->op_unmap().

If ->ro_reset() is running due to a transport disconnect, the two
methods can race while processing the same rpcrdma_mw. The results
are unpredictable.

Because of this, in previous patches I've altered ->ro_map() to
handle MR reset. ->ro_reset() is no longer needed and can be
removed.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

The connect worker can replace ri_id, but prevents ri_id->device
from changing during the lifetime of a transport instance. The old
ID is kept around until a new ID is created and the ->device is
confirmed to be the same.

Cache a copy of ri_id->device in rpcrdma_ia and in rpcrdma_rep.
The cached copy can be used safely in code that does not serialize
with the connect worker.

Other code can use it to save an extra address generation (one
pointer dereference instead of two).
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

These functions are called in a loop for each page transferred via
RDMA READ or WRITE. Extract loop invariants and inline them to
reduce CPU overhead.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

The open op determines the size of various transport data structures
based on device capabilities and memory registration mode.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Memory Region objects associated with a transport instance are
destroyed before the instance is shutdown and destroyed.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

This method is invoked when a transport instance is about to be
reconnected. Each Memory Region object is reset to its initial
state.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

This method is used when setting up a new transport instance to
create a pool of Memory Region objects that will be used to register
memory during operation.

Memory Regions are not needed for "physical" registration, since
->prepare and ->release are no-ops for that mode.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

There is very little common processing among the different external
memory deregistration functions.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

There is very little common processing among the different external
memory registration functions. Have rpcrdma_create_chunks() call
the registration method directly. This removes a stack frame and a
switch statement from the external registration path.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

The max_payload computation is generalized to ensure that the
payload maximum is the lesser of RPC_MAX_DATA_SEGS and the number of
data segments that can be transmitted in an inline buffer.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Instead of employing switch() statements, let's use the typical
Linux kernel idiom for handling behavioral variation: virtual
functions.

Start by defining a vector of operations for each supported memory
registration mode, and by adding a source file for each mode.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NDevesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: NMeghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: NVeeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>