This driver got rescued from a few years ago and was requested to be
added.  So I cleaned it up, ported it to the latest kernel version and
here it is.

Cc: Thomas Hergenhahn <thomas.hergenhahn@suse.de>
Cc: Emmanuele <iemmav@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is for the serial mode of the Opticon barcode scanner.

Cc: Kees Stoop <kees.stoop@opticon.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This should speed up the option driver's upload speed quite a bit.  It has been tested by a number of different people on different devices with success.

Cc: Roland Wolters <roland.wolters@credativ.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some of the usb-serial drivers are starting to use urb->status in ways
they should not be doing.  This fixes up some of them to prevent that.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Sparse asked whether these could be static.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

mark {__init|__exit} for usb_ipw_{init|exit} ()
Signed-off-by: NQinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We don't need the BKL here any more so it can go. In a couple of spots the
driver requirements are not clear so push the lock down into the driver.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The underlying problem is that the device methods don't all correctly
handle disconnected status and some keep reporting bytes pending which
causes tcdrain to stall.

When the cable is unplugged they are definitely gone, and as this is true
for all USB cables we can fix it in the core usb serial code.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add device funtion for usb serial console, so we can open /dev/console
when we use a usb serial device as console.

(Typecast removed as noted by Sergei Shtylyov)
Signed-off-by: NKevin Hao <kexin.hao@windriver.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

USB serial has always had races where the tty port usage count can hit zero
during a receive event. The internal locking is a mutex so we can't use
that in the IRQ handlers.

With krefs we can tackle this differently but we still need to be careful.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Andrew Morton wrote:

in drivers/usb/serial/sierra.c:

        } else {
                if (urb->actual_length) {
+               tty = tty_port_tty_get(&port->port);
                        tty_buffer_request_room(tty, urb->actual_length);

it's missing a tab.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add id for the Hewlett-Packard LD220-HP POS pole display.

Bus 002 Device 002: ID 03f0:3524 Hewlett-Packard
Signed-off-by: NMike Provencher <mike.provencher@hp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This driver transfers firmware. It may just as well set the correct
configuration.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the "Superial" USB-Serial converter to pl2303 so that it
is detected, by the correct driver.  Adds the relevant vendor:product
(5372:2303) to the device tables in pl2303.c & pl2303.h.  The patch has
been tested against 2.6.24-22-generic.
Signed-off-by: NMatthew D Arnold <matthew.arnold-1@uts.edu.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The following patch adds in the USB PID for Ewert Energy System's CANdapter
device (CANBUS to USB-Serial which uses the FTDI 245R chipset) to the ftdi_sio
device driver.

The patch was tested successfully on Linux kernel 2.6.27 under Ubuntu.

Relevant output from /proc/bus/usb/devices (With patch installed):

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0403 ProdID=9f80 Rev= 6.00
S:  Manufacturer=Ewert Energy Systems
S:  Product=CANdapter
S:  SerialNumber=A6RGB3Z3
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
Signed-off-by: NAndrew Ewert <andrew@ewertenergy.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Someone on rmweb reminded me this had been overlooked from ages ago..

Add the identifiers for the Sprog II USB. This is a DCC control interface
using the FTDI-SIO hardware: http://www.sprog-dcc.co.uk/. People have been
using it with insmod options for ages, this just puts it into the driver
data.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

[Folded together as one diff from 3]

It should be 'lose', not 'loose'.
Signed-off-by: NNick Andrew <nick@nick-andrew.net>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We alloc a fake tty in usb serial console setup function. we should
init the tty's kref otherwise we will face WARN_ON after following
invoke of tty_port_tty_set --> tty_kref_get.
Signed-off-by: NKevin Hao <kexin.hao@windriver.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Thanks to Domenico Riccio for pointing these out.

Cc: Domenico Riccio <domenico.riccio@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The patch which adds IDs for AKTAKOM USB->RS232 cable
(http://www.aktakom.ru/product/kio/ace-1001.htm) is attached.

From: M Kondrin <mkondrin@hppi.troitsk.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Enfora GSM2228 based on Cygnal Integrated Products chip uses the same
cp2101 driver.
Signed-off-by: NDamir N Abdullin <damir@mimas.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the device vendor and product IDs for Amber Wireless AMB2560
Signed-off-by: NCraig Shelley <craig@microtron.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds YISO u893 usb modem vendor and product ID to option.c.

I had a better experience using this modification and the same system.
Signed-off-by: NLeslie Harlley Watter <leslie@watter.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When we close we must clear the extra reference we got when we read
port->tty. Setting the port tty NULL will clear the kref held by the driver
but not the one we obtained ourselves while doing the lookup.
Signed-off-by: NAlan Cox <alan@redhat.com>
Tested-by: NHelge Hafting <helge.hafting@aitel.hist.no>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In this patch, we want to do one thing: add more Huawei product IDs into the
USB driver. Then it can support  more Huawei data card devices. So to declare
the unusual device for new Huawei data card devices in unusual_devs.h and to
declare more new product IDs in option.c.

To modify the data value and length in the function of
usb_stor_huawei_e220_init in initializers.c That's because based on the USB
standard, while sending SET_FETURE_D to the device, it requires the
corresponding data to be zero, and its sending length also must be zero.  In
our old solution, it can be compatible with our WCDMA data card devices, but
can not support our CDMA data card devices.  But in this new solution, it can
be compatible with all of our data card devices.
Signed-off-by: Nfangxiaozhi <huananhu@huawei.com>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMikhail Gusarov <dottedmag@dottedmag.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

err() is going away, so switch to dev_err() or printk() if it's really
needed.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add some Pantech mobile broadband IDs.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The AnyData ADU-310 series of wireless modems uses the same product ID as the ADU-E100 series.
Signed-off-by: NJon K Hellan <hellan@acm.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Removed duplicated #include <linux/firmware.h> in
drivers/usb/serial/ti_usb_3410_5052.c.
Signed-off-by: NHuang Weiyi <hwy@cn.fujitsu.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch moves dbg calls to dev_dbg where possible. It also fixes some
issues with a previous submission aiming to do the same thing.
Signed-off-by: NKevin Lloyd <klloyd@sierrawireless.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add Oceanic PID to ftdi_sio driver

Oceanic dive computers (such as the VT3 --
http://www.oceanicworldwide.com/p_computers_vt3.html) all use an onboard
FTDI serial converter, with the FTDI vid and a  PID of 0xf460.  The
attached patch adds that pid to ftdi_sio; driver  connects to my VT3
after that.
Signed-off-by: NVladimir Vukicevic <vladimir@pobox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove duplicate device ids which are now supported by drivers/usb/net/hso.c
Signed-off-by: NDenis Joseph Barrow <D.Barow@option.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add a few more mobile broadband cards.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use kref in the USB serial drivers so that we don't free tty structures
from under the URB receive handlers as has historically been the case if
you were unlucky. This also gives us a framework for general tty drivers to
use tty_port objects and refcount.

Contains two err->dev_err changes merged together to fix clashes in the
-next tree.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes #10783
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes the private check for the termios_initialized for
the pl2303 usb driver.  It forced the baud to 9600 on the first call
to pl2303_set_termios()

Based on the tty changes in the 2.6.27 kernel, the termios passed to
the *_set_termios functions is always populated the first time.

This means there is no need to privately initialize the settings the
first time, and doing so will not allow the use of the kernel
parameter "console=ttyUSB0,115200" as an example.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>