- 28 6月, 2006 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 27 6月, 2006 3 次提交
-
-
由 Michael Buesch 提交于
Signed-off-by: NMichael Buesch <mb@bu3sch.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Akinobu Mita 提交于
This patch converts the combination of list_del(A) and list_add(A, B) to list_move(A, B) under drivers/. Acked-by: NCorey Minyard <minyard@mvista.com> Cc: Ben Collins <bcollins@debian.org> Acked-by: NRoland Dreier <rolandd@cisco.com> Cc: Alasdair Kergon <dm-devel@redhat.com> Cc: Gerd Knorr <kraxel@bytesex.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Frank Pavlic <fpavlic@de.ibm.com> Acked-by: NMatthew Wilcox <matthew@wil.cx> Cc: Andrew Vasquez <linux-driver@qlogic.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: NAkinobu Mita <mita@miraclelinux.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andreas Mohr 提交于
acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 26 6月, 2006 5 次提交
-
-
由 Ben Collins 提交于
[UBUNTU:nsc-ircc] Add some IBM think pads Add Thinkpad T60/X60/Z60/T43/R52 Infrared driver support. http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=7b8d2713435a9fb69719a282ba75e117f3f76a5bSigned-off-by: NBen Collins <bcollins@ubuntu.com> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Greg Ungerer 提交于
Specify the struct mapping used on the new Freescale 532x CPU family's FEC ethernet core. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
drivers/net/irda/irda-usb.c: In function 'stir421x_patch_device': drivers/net/irda/irda-usb.c:1108: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'size_t' Cc: Greg KH <greg@kroah.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
netdev->set_config can be called at any time, so these references to __initdata would be a real problem. However, problem has not been observed AFAIK. Fix section mismatch warnings: WARNING: drivers/net/wan/sdla.o - Section mismatch: reference to .init.data: from .text between 'sdla_set_config' (at offset 0x1b8e) and 'sdla_stats' WARNING: drivers/net/wan/sdla.o - Section mismatch: reference to .init.data: from .text between 'sdla_set_config' (at offset 0x1e76) and 'sdla_stats' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roman Zippel 提交于
Rename IRQ1..IRQ7 to IRQ_AUTO_1..IRQ_AUTO_7 and remove the duplicate defintions. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 6月, 2006 10 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
And make it a real PCI driver too. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Use CONFIG_SPARC and CONFIG_SPARC64 instead. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
One thing this change pointed out was that we really should pull the "get 'local-mac-address' property" logic into a helper function all the network drivers can call. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 6月, 2006 21 次提交
-
-
由 David Woodhouse 提交于
The tuntap driver allows an admin to create persistent devices and assign ownership of them to individual users. Unfortunately, relaxing the permissions on the /dev/net/tun device node so that they can actually use those devices will _also_ allow those users to create arbitrary new devices of their own. This patch corrects that, and adjusts the recommended permissions for the device node accordingly. Signed-off-By: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not going to scale if we add any more segmentation methods (e.g., DCCP). So let's merge them. They were used to tell the protocol of a packet. This function has been subsumed by the new gso_type field. This is essentially a set of netdev feature bits (shifted by 16 bits) that are required to process a specific skb. As such it's easy to tell whether a given device can process a GSO skb: you just have to and the gso_type field and the netdev's features field. I've made gso_type a conjunction. The idea is that you have a base type (e.g., SKB_GSO_TCPV4) that can be modified further to support new features. For example, if we add a hardware TSO type that supports ECN, they would declare NETIF_F_TSO | NETIF_F_TSO_ECN. All TSO packets with CWR set would have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO packets would be SKB_GSO_TCPV4. This means that only the CWR packets need to be emulated in software. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
First of all it is unnecessary to allocate a new skb in skb_pad since the existing one is not shared. More importantly, our hard_start_xmit interface does not allow a new skb to be allocated since that breaks requeueing. This patch uses pskb_expand_head to expand the existing skb and linearize it if needed. Actually, someone should sift through every instance of skb_pad on a non-linear skb as they do not fit the reasons why this was originally created. Incidentally, this fixes a minor bug when the skb is cloned (tcpdump, TCP, etc.). As it is skb_pad will simply write over a cloned skb. Because of the position of the write it is unlikely to cause problems but still it's best if we don't do it. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brice Goglin 提交于
We don't need to restore the state right after saving it for later recovery since commit 99dc804d (PCI: disable msi mode in pci_disable_device) now prevents pci_save_state() from disabling MSI. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brice Goglin 提交于
We don't need to hardcode the AER capability of the nVidia CK804 chipset anymore since commit cf34a8e0 (PCI: nVidia quirk to make AER PCI-E extended capability visible) now makes sure that this cap will be available to pci_find_ext_capability(). Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Krzysztof Halasa 提交于
Eric Sesterhenn found that pci200syn initialization lacks return statement in ioremap() error path (coverity bug id #195). It looks like more WAN drivers have problems with ioremap(). Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Krzysztof Halasa 提交于
David Boggs noticed that register_hdlc_device() no longer needs to call dev_alloc_name() as it's called by register_netdev(). register_hdlc_device() is currently equivalent to register_netdev(). hdlc_setup() is now EXPORTed as per David's request. Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
Ar Iau, 2006-06-22 am 21:29 +1000, ysgrifennodd Herbert Xu: > Alan Cox <alan@lxorguk.ukuu.org.uk> wrote: > > > > The 8390 change (corrected version) also makes 8390.c faster so should > > be applied anyway, and the orinoco one fixes some code that isn't even > > needed and someone forgot to remove long ago. Otherwise the skb_padto > > Yeah I agree totally. However, I haven't actually seen the fixed 8390 > version being posted yet or at least not to netdev :) Ah the resounding clang of a subtle hint ;) Signed-off-by: NAlan Cox <alan@redhat.com> - Return 8390.c to the old way of handling short packets (which is also faster) - Remove the skb_padto from orinoco. This got left in when the padding bad write patch was added and is actually not needed. This is fixing a merge error way back when. - Wavelan can also use the stack based buffer trick if you want Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Adrian Bunk 提交于
This patch makes the needlessly global nv_update_pause() static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Sascha Hauer 提交于
This is a patch for the Hilscher netx builtin ethernet ports. The netx board support was merged into 2.6.17-git2. The netx is a arm926 based SoC. Signed-off-by: NRobert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> -- drivers/net/Kconfig | 11 drivers/net/Makefile | 1 drivers/net/netx-eth.c | 516 ++++++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-netx/eth.h | 27 ++ 4 files changed, 555 insertions(+) Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Eric Sesterhenn 提交于
hi, coverity found (bug id #225) that we might call free_netdev() with NULL argument, when alloc_trdev() fails. This patch changes the goto, so we dont call free_netdev() for dev == NULL. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Eric Sesterhenn 提交于
hi, this is another array overrun spotted by coverity (#id 507) we should check the index against array size before using it. Not sure why the driver doesnt use ARRAY_SIZE instead of its own macro. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Eric Sesterhenn 提交于
hi, coverity choked at this check (id #223), assuming that skb might be NULL and used anyways later. Since start_hard_xmit() always gets called with a valid skb, the check is useless and this patch removes it. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Philip Craig 提交于
Implement the ethtool eeprom operations for the 8139cp driver. Tested on x86 and big-endian ARM. Signed-off-by: NPhilip Craig <philipc@snapgear.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Philip Craig 提交于
The read command for the 93C46/93C56 EEPROMS should be 3 bits plus the address. This doesn't appear to affect the operation of the read command, but similar errors for write commands do cause failures. Signed-off-by: NPhilip Craig <philipc@snapgear.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gary Zambrano 提交于
Deleted "EXPERIMENTAL" from b44 entry in Kconfig. Signed-off-by: NGary Zambrano <zambrano@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gary Zambrano 提交于
Update the driver version to 1.01 Signed-off-by: NGary Zambrano <zambrano@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gary Zambrano 提交于
This patch adds wol support for the older 440x nics that use pattern matching. This patch is a redo thanks to feedback from Michael Chan and Francois Romieu. Signed-off-by: NGary Zambrano <zambrano@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gary Zambrano 提交于
This patch adds a parameter to init_hw() to not completely initialize the nic for wol. Signed-off-by: NGary Zambrano <zambrano@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gary Zambrano 提交于
Adds wol to the driver. This is a redo of a previous patch thanks to feedback from Francois Romieu. Signed-off-by Gary Zambrano <zambrano@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Gary Zambrano 提交于
Fixes for speed/duplex/autoneg settings and driver settings info. This is a redo of a previous patch thanks to feedback from Jeff Garzik. Signed-off-by: NGary Zambrano <zambrano@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-