- 11 10月, 2008 28 次提交
-
-
* Add IDE_PC_BUFFER_SIZE define. * Add ide_init_pc() and convert ide-{floppy,tape}.c to use it instead of ide*_init_pc(). * Remove no longer used IDE*_PC_BUFFER_SIZE and ide*_init_pc(). There should be no functional changes caused by this patch. Acked-by: NBorislav Petkov <petkovbb@gmail.com> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Make ->io_buffers method return number of bytes transferred. * Use ide_end_request() instead of idefloppy_end_request() in ide_floppy_io_buffers() and then move the call out to ide_pc_intr(). * Add ide_io_buffers() helper and convert ide-{floppy,scsi}.c to use it instead of ide*_io_buffers(). There should be no functional changes caused by this patch. Acked-by: NBorislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ide_check_atapi_device() to ide-atapi.c and convert ide-{floppy,tape}.c to use it instead of ide*_identify_device(). While at it: * Add DRV_NAME defines to ide-{floppy,tape}.c. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Move ioctls handling to ide-ioctls.c (except HDIO_DRIVE_TASKFILE for now). * Make ide_{cmd,task}() static. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add struct ide_ioctl_devset representing ioctl device setting. * Add ide_setting_ioctl() helper for matching given ioctl and its parameters against table of ioctl device settings. * Convert ide_setting_ioctl() and idedisk_ioctl() to use ide_setting_ioctl(). * Un-export ide_setting_mtx. While at it: * {get,set}_lba_addressing() -> {get,set}_addressing() There should be no functional changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
It is always set to BUSSTATE_ON. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Keep pointer to ->init_chipset method also in struct ide_host and set it in ide_host_alloc_all(). * Add ide_pci_suspend() and ide_pci_resume() helpers (default ->suspend and ->resume implementations). * ->init_chipset can no longer be marked __devinit. * Add proper PCI PM support to IDE PCI host drivers (rz1000.c and tc86c001.c are skipped for now since they need to be converted from using ->init_hwif to use ->init_chipset instead). v2: * Cleanup CONFIG_PM #ifdef-s per akpm's suggestion. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Rename lba_capacity_is_ok() to ata_id_is_lba_capacity_ok() and move it to <linux/ata.h> (remove needless parens while at it). Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Rename ide_id_to_hd_driveid() to ata_id_to_hd_driveid() and move it to <linux/ata.h>. Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ata_id_flush_ext_enabled() inline helper to <linux/ata.h>. * ide_id_has_flush_cache_ext() -> ata_id_flush_ext_enabled() The latter one also checks if the command is marked as supported in word 83 and validity of words 83 & 86. Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ata_id_flush_enabled() inline helper to <linux/ata.h>. * ide_id_has_flush_cache() -> ata_id_flush_enabled() The latter one also checks if the command is marked as supported in word 83 and validity of words 83 & 86. Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
All devices supporting CACHE FLUSH EXT command should also support CACHE FLUSH command so it is sufficient to check only for CACHE FLUSH in ide_id_has_flush_cache(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ata_id_lba48_enabled() inline helper to <linux/ata.h>. * idedisk_supports_lba48() -> ata_id_lba48_enabled() The latter one also checks validity of words 83 & 86. Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Use optimized ATA version check from Sergei in ata_id_is_sata(). * ide_dev_is_sata() -> ata_id_is_sata() Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Remove (id[ATA_ID_FIELD_VALID] & 2) check from ide_dev_has_iordy() (it is for validity of words 64-70, IORDY is in word 49). * ide_dev_has_iordy() -> ata_id_has_iordy() Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Use drive->media and drive->scsi to check if ->dsc_overlap can be set by HDIO_SET_NICE ioctl in generic_ide_ioctl(). * Remove unused ->supports_dsc_overlap field from ide_driver_t. There should be no functional changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Just use SECTOR_SIZE instead. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add struct ide_devset, S_* flags, *DEVSET() & ide*_devset_*() macros. * Add 'const struct ide_devset **settings' to ide_driver_t. * Use 'const struct ide_devset **settings' in ide_drive_t instead of 'struct ide_settings_s *settings'. Then convert core code and device drivers to use struct ide_devset and co.: - device settings are no longer allocated dynamically for each device but instead there is an unique struct ide_devset instance per setting - device driver keeps the pointer to the table of pointers to its settings in ide_driver_t.settings - generic settings are kept in ide_generic_setting[] - ide_proc_[un]register_driver(), ide_find_setting_by_name(), ide_{read,write}_setting() and proc_ide_{read,write}_settings() are updated accordingly - ide*_add_settings() are removed * Remove no longer used __ide_add_setting(), ide_add_setting(), __ide_remove_setting() and auto_remove_settings(). * Remove no longer used TYPE_*, SETTING_*, ide_procset_t and ide_settings_t. * ->keep_settings, ->using_dma, ->unmask, ->noflush, ->dsc_overlap, ->nice1, ->addressing, ->wcache and ->nowerr ide_drive_t fields can now be bitfield flags. While at it: * Rename ide_find_setting_by_name() to ide_find_setting(). * Rename write_wcache() to set_wcache(). There should be no functional changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
After rework settings will be no longer created dynamically for each device so we need to make some fixups first. * Use set_[ksettings,unmaskirq]() as a set function for ["keepsettings","unmaskirq"] setting. * Allow writes to ["io_32bit","unmaskirq"] settings also when drive->no_[io_32bit,unmask] is set (this is checked later inside set_[io_32bit,unmaskirq]() anywyay and keeps consistency with the corresponding HDIO_SET_[32BIT,UNMASKINTR] ioctls). * Use max possible multi sectors value (16) as an allowed max for "multcount" setting. set_multcount() set function checks against device's max possbile value anyway and it makes the proc setting consistent with the corresponding HDIO_SET_MULTCOUNT ioctl. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Include <linux/ata.h> directly in <linux/ide.h> instead of through <linux/hdreg.h>. * Include <linux/hdreg.h> only when needed. Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Change ide_get_paired_drive() to return NULL if peer device is not present and update all users accordingly. While at it: * ide_get_paired_drive() -> ide_get_pair_dev() * Use ide_get_pair_dev() in cs5530.c, sc1200.c and via82cxxx.c. There should be no functional changes caused by this patch. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
They just obfuscate the code. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Make ide_busy_sleep() take timeout value as a parameter and also allow use of AltStatus Register if requested with altstatus parameter. Update existing users accordingly. * Convert ide_driveid_update() and actual_try_to_identify() to use ide_busy_sleep(). There should be no functional changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Remove ->remap_0_to_1 and ->sect0 (they are always zero now). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* ERR_STAT -> ATA_ERR * INDEX_STAT -> ATA_IDX * ECC_STAT -> ATA_CORR * DRQ_STAT -> ATA_DRQ * SEEK_STAT -> ATA_DSC * WRERR_STAT -> ATA_DF * READY_STAT -> ATA_DRDY * BUSY_STAT -> ATA_BUSY * MARK_ERR -> ATA_AMNF * TRK0_ERR -> ATA_TRK0NF * ABRT_ERR -> ATA_ABORTED * MCR_ERR -> ATA_MCR * ID_ERR -> ATA_IDNF * MC_ERR -> ATA_MC * ECC_ERR -> ATA_UNC * ICRC_ERR -> ATA_ICRC * BBD_ERR -> ATA_BBK Also: * ILI_ERR -> ATAPI_ILI * EOM_ERR -> ATAPI_EOM * LFS_ERR -> ATAPI_LFS * CD -> ATAPI_COD * IO -> ATAPI_IO Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Factor out HDIO_[OBSOLETE,GET]_IDENTITY ioctls handling to ide_get_identity_ioctl(). * Use temporary buffer in ide_get_identity_ioctl() instead of accessing drive->id directly. * Add ide_id_to_hd_driveid() inline to convert raw id into struct hd_driveid format (needed on big-endian). * Use ide_id_to_hd_driveid() in ide_get_identity_ioctl(), cleanup ide_fix_driveid() and switch ide to use use raw id. * Remove no longer needed drive->driveid. This leaves us with 3 users of struct hd_driveid in tree: - arch/um/drivers/ubd_kern.c - drivers/block/xsysace.c - drivers/usb/storage/isd200.c While at it: * Use ata_id_u{32,64}() and ata_id_has_{dma,lba,iordy}() macros. There should be no functional changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Make drive->id an unnamed union so id can be accessed either by using 'u16 *id' or 'struct hd_driveid *driveid'. Then convert all existing drive->id users accordingly (using 'u16 *id' when possible). This is an intermediate step to make ide 'struct hd_driveid'-free. While at it: - Add missing KERN_CONTs in it821x.c. - Use ATA_ID_WORDS and ATA_ID_*_LEN defines. - Remove unnecessary checks for drive->id. - s/drive_table/table/ in ide_in_drive_list(). - Cleanup ide_config_drive_speed() a bit. - s/drive1/dev1/ & s/drive0/dev0/ in ide_undecoded_slave(). v2: Fix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell) There should be no functional changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 10 10月, 2008 4 次提交
-
-
由 Mikulas Patocka 提交于
Publish dm_vcalloc in include/linux/device-mapper.h because this function is used by targets. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Publish dm_table_unplug_all in include/linux/device-mapper.h because this function is used by targets. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Publish dm_get_mapinfo in include/linux/device-mapper.h because this function is used by targets. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Split struct dm_dev in two and publish the part that other targets need in include/linux/device-mapper.h. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 09 10月, 2008 8 次提交
-
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Denis ChengRq 提交于
Since all bio_split calls refer the same single bio_split_pool, the bio_split function can use bio_split_pool directly instead of the mempool_t parameter; then the mempool_t parameter can be removed from bio_split param list, and bio_split_pool is only referred in fs/bio.c file, can be marked static. Signed-off-by: NDenis ChengRq <crquan@gmail.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Martin K. Petersen 提交于
Helper function to find the sector offset in a bio given bvec index and page offset. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Martin K. Petersen 提交于
This is a wrapper for accessing a gendisk's integrity bits. It allows the integrity support in MD to be compiled with BLK_DEV_INTEGRITY off. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Martin K. Petersen 提交于
The DM and MD integrity support now depends on being able to use gendisks instead of block_devices when comparing integrity profiles. Change function parameters accordingly. Also update comparison logic so that two NULL profiles are a valid configuration. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Martin K. Petersen 提交于
A filesystem might supply its own integrity metadata. Introduce a flag that indicates whether the filesystem or the block layer owns the integrity buffer. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
We need bdev_get_integrity() to support the pending md/dm patches. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Alberto Bertogli 提交于
The whole bio_integrity() definition is inside an #ifdef CONFIG_BLK_DEV_INTEGRITY, there's no need for the conditional code. Signed-off-by: NAlberto Bertogli <albertito@blitiri.com.ar> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-