From: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: NAnton Altaparmakov <anton@tuxera.com>

Found by Coverity software (http://scan.coverity.com).
Signed-off-by: NAnton Altaparmakov <anton@tuxera.com>

Found by Coverity software (http://scan.coverity.com).
Signed-off-by: NAnton Altaparmakov <anton@tuxera.com>

For historical reasons, we allow module_param(bool) to take an int (or
an unsigned int).  That's going away.

A few drivers really want an int: they set it to -1 and a parameter
will set it to 0 or 1.  This sucks: reading them from sysfs will give
'Y' for both -1 and 1, but if we change it to an int, then the users
might be broken (if they did "param" instead of "param=1").

Use a new 'bint' parser for them.

(ntfs has a different problem: it needs an int for debug_msgs because
it's also exposed via sysctl.)

Cc: Steve Glendinning <steve.glendinning@smsc.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Cc: Christoph Raisch <raisch@de.ibm.com>
Cc: Roland Dreier <roland@kernel.org>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux390@de.ibm.com
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: lm-sensors@lm-sensors.org
Cc: linux-rdma@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-ntfs-dev@lists.sourceforge.net
Cc: alsa-devel@alsa-project.org
Acked-by: Takashi Iwai <tiwai@suse.de> (For the sound part)
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> (For the hwmon driver)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

same story as with isofs and udf...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else.  Not to mention the removal of
boilerplate code from ->destroy_inode() instances...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Replace remaining direct i_nlink updates with a new set_nlink()
updater function.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Tested-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Standardize the style for compiler based printf format verification.
Standardized the location of __printf too.

Done via script and a little typing.

$ grep -rPl --include=*.[ch] -w "__attribute__" * | \
  grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \
  xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }'

[akpm@linux-foundation.org: revert arch bits]
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>
Signed-off-by: NArun Sharma <asharma@fb.com>
Reviewed-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers.  Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2.  For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

i_alloc_sem is a rather special rw_semaphore.  It's the last one that may
be released by a non-owner, and it's write side is always mirrored by
real exclusion.  It's intended use it to wait for all pending direct I/O
requests to finish before starting a truncate.

Replace it with a hand-grown construct:

 - exclusion for truncates is already guaranteed by i_mutex, so it can
   simply fall way
 - the reader side is replaced by an i_dio_count member in struct inode
   that counts the number of pending direct I/O requests.  Truncate can't
   proceed as long as it's non-zero
 - when i_dio_count reaches non-zero we wake up a pending truncate using
   wake_up_bit on a new bit in i_flags
 - new references to i_dio_count can't appear while we are waiting for
   it to read zero because the direct I/O count always needs i_mutex
   (or an equivalent like XFS's i_iolock) for starting a new operation.

This scheme is much simpler, and saves the space of a spinlock_t and a
struct list_head in struct inode (typically 160 bits on a non-debug 64-bit
system).
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

All that remains of the inode_lock is protecting the inode hash list
manipulation and traversals. Rename the inode_lock to
inode_hash_lock to reflect it's actual function.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Replace EXTRA_CFLAGS with ccflags-y. And change ntfs-objs to ntfs-y
for cleaner conditional inclusion.
Signed-off-by: Nmatt mooney <mfm@muteddisk.com>
Acked-by: NWANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

In ntfs_mft_record_alloc() when mapping the new extent mft record with
map_extent_mft_record() we overwrite @m with the return value and on
error, we then try to use the old @m but that is no longer there as @m
now contains an error code instead so we crash when dereferencing the
error code as if it were a pointer.

The simple fix is to use a temporary variable to store the return value
thus preserving the original @m for later use.  This is a backport from
the commercial Tuxera-NTFS driver and is well tested...

Thanks go to Julia Lawall for pointing this out (whilst I had fixed it
in the commercial driver I had failed to fix it in the Linux kernel).
Signed-off-by: NAnton Altaparmakov <anton@tuxera.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix writev() to not keep writing the first segment over and over again
instead of moving onto subsequent segments and update the NTFS entry in
MAINTAINERS to reflect that Tuxera Inc. now supports the NTFS driver.
Signed-off-by: NAnton Altaparmakov <anton@tuxera.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

RCU free the struct inode. This will allow:

- Subsequent store-free path walking patch. The inode must be consulted for
  permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
  to take i_lock no longer need to take sb_inode_list_lock to walk the list in
  the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
  page lock to follow page->mapping.

The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.

In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.

The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

... and switch of the obvious get_sb_bdev() users to ->mount()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Clones an existing reference to inode; caller must already hold one.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We are in fill_super(); again, no inodes with zero i_count could
be around until we set MS_ACTIVE.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The BKL is only used in put_super, fill_super and remount_fs that are all
three protected by the superblocks s_umount rw_semaphore. Therefore it is
safe to remove the BKL entirely.
Signed-off-by: NJan Blunck <jblunck@infradead.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This patch is a preparation necessary to remove the BKL from do_new_mount().
It explicitly adds calls to lock_kernel()/unlock_kernel() around
get_sb/fill_super operations for filesystems that still uses the BKL.

I've read through all the code formerly covered by the BKL inside
do_kern_mount() and have satisfied myself that it doesn't need the BKL
any more.

do_kern_mount() is already called without the BKL when mounting the rootfs
and in nfsctl. do_kern_mount() calls vfs_kern_mount(), which is called
from various places without BKL: simple_pin_fs(), nfs_do_clone_mount()
through nfs_follow_mountpoint(), afs_mntpt_do_automount() through
afs_mntpt_follow_link(). Both later functions are actually the filesystems
follow_link inode operation. vfs_kern_mount() is calling the specified
get_sb function and lets the filesystem do its job by calling the given
fill_super function.

Therefore I think it is safe to push down the BKL from the VFS to the
low-level filesystems get_sb/fill_super operation.

[arnd: do not add the BKL to those file systems that already
       don't use it elsewhere]
Signed-off-by: NJan Blunck <jblunck@infradead.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Christoph Hellwig <hch@infradead.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Replace inode_setattr with opencoded variants of it in all callers.  This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the proper truncate sequence.

In a few cases it was obvious that we would never end up calling vmtruncate
so it was left out in the opencoded variant:

 spufs: explicitly checks for ATTR_SIZE earlier
 btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier
 ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above

In addition to that ncpfs called inode_setattr with handcrafted iattrs,
which allowed to trim down the opencoded variant.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Quote from Nick piggin's about btrfs patch
- http://www.mail-archive.com/linux-btrfs@vger.kernel.org/msg04472.html.

"add_to_page_cache_lru is exported, so it should be used. Benefits over
using a private pagevec: neater code, 128 bytes fewer stack used, percpu
lru ordering is preserved, and finally don't need to flush pagevec
before returning so batching may be shared with other LRU insertions."

Let's use it instead of private pagevec in ntfs, too.
Signed-off-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NAnton Altaparmakov <aia21@cantab.net>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cached_page and lru_pvec have not been used.  Let's remove the arguments.
Signed-off-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NAnton Altaparmakov <aia21@cantab.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

Use bitmap_weight() instead of doing hweight32() for each u32 element in
the page.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This gives the filesystem more information about the writeback that
is happening.  Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Remove fs/ntfs/ChangeLog. No need for such files since we have git.
Acked-by: NAnton Altaparmakov <aia21@cam.ac.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

After I_SYNC was split from I_LOCK the leftover is always used together with
I_NEW and thus superflous.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.
Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

For consistency drop & in front of every proc_handler.  Explicity
taking the address is unnecessary and it prevents optimizations
like stubbing the proc_handlers to NULL.

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

Now that sys_sysctl is a generic wrapper around /proc/sys  .ctl_name
and .strategy members of sysctl tables are dead code.  Remove them.

Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

Most call sites of unload_nls() do:
	if (nls)
		unload_nls(nls);

Check the pointer inside unload_nls() like we do in kfree() and
simplify the call sites.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Steve French <sfrench@us.ibm.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
Cc: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

do_sync_write() does the right thing for turning the aio_writev method
into a normal non-vectored synchronous write, no need to duplicate it in
ntfs.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NAnton Altaparmakov <aia21@cantab.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sizing of memory allocations shouldn't depend on the number of physical
pages found in a system, as that generally includes (perhaps a huge amount
of) non-RAM pages.  The amount of what actually is usable as storage
should instead be used as a basis here.

Some of the calculations (i.e.  those not intending to use high memory)
should likely even use (totalram_pages - totalhigh_pages).
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>