Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver.  There were two flags in the bio that were
missing in the requests:  BIO_RW_UNPLUG and BIO_RW_AHEAD.  Also I've
renamed two request flags that had a superflous RW in them.

Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests.  This allows much easier grepping for different request
types instead of unwinding through macros.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

There are few situations where it would make any sense to add a spare
when reducing the number of devices in an array, but it is
conceivable:  A 6 drive RAID6 with two missing devices could be
reshaped to a 5 drive RAID6, and a spare could become available
just in time for the reshape, but not early enough to have been
recovered first.  'freezing' recovery can make this easy to
do without any races.

However doing such a thing is a bad idea.  md will not record the
partially-recovered state of the 'spare' and when the reshape
finished it will think that the spare is still spare.
Easiest way to avoid this confusion is to simply disallow it.
Signed-off-by: NNeilBrown <neilb@suse.de>

As the comment says, the tail of this loop only applies to devices
that are not fully in sync, so if In_sync was set, we should avoid
the rest of the loop.

This bug will hardly ever cause an actual problem.  The worst it
can do is allow an array to be assembled that is dirty and degraded,
which is not generally a good idea (without warning the sysadmin
first).

This will only happen if the array is RAID4 or a RAID5/6 in an
intermediate state during a reshape and so has one drive that is
all 'parity' - no data - while some other device has failed.

This is certainly possible, but not at all common.
Signed-off-by: NNeilBrown <neilb@suse.de>

During a recovery of reshape the early part of some devices might be
in-sync while the later parts are not.
We we know we are looking at an early part it is good to treat that
part as in-sync for stripe calculations.

This is particularly important for a reshape which suffers device
failure.  Treating the data as in-sync can mean the difference between
data-safety and data-loss.
Signed-off-by: NNeilBrown <neilb@suse.de>

When we are reshaping an array, the device failure combinations
that cause us to decide that the array as failed are more subtle.

In particular, any 'spare' will be fully in-sync in the section
of the array that has already been reshaped, thus failures that
affect only that section are less critical.

So encode this subtlety in a new function and call it as appropriate.

The case that showed this problem was a 4 drive RAID5 to 8 drive RAID6
conversion where the last two devices failed.
This resulted in:

  good good good good incomplete good good failed failed

while converting a 5-drive RAID6 to 8 drive RAID5
The incomplete device causes the whole array to look bad,
bad as it was actually good for the section that had been
converted to 8-drives, all the data was actually safe.
Reported-by: NTerry Morris <tbmorris@tbmorris.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

When an array is reshaped to have fewer devices, the reshape proceeds
from the end of the devices to the beginning.

If a device happens to be non-In_sync (which is possible but rare)
we would normally update the ->recovery_offset as the reshape
progresses. However that would be wrong as the recover_offset records
that the early part of the device is in_sync, while in fact it would
only be the later part that is in_sync, and in any case the offset
number would be measured from the wrong end of the device.

Relatedly, if after a reshape a spare is discovered to not be
recoverred all the way to the end, not allow spare_active
to incorporate it in the array.

This becomes relevant in the following sample scenario:

A 4 drive RAID5 is converted to a 6 drive RAID6 in a combined
operation.
The RAID5->RAID6 conversion will cause a 5 drive to be included as a
spare, then the 5drive -> 6drive reshape will effectively rebuild that
spare as it progresses.  The 6th drive is treated as in_sync the whole
time as there is never any case that we might consider reading from
it, but must not because there is no valid data.

If we interrupt this reshape part-way through and reverse it to return
to a 5-drive RAID6 (or event a 4-drive RAID5), we don't want to update
the recovery_offset - as that would be wrong - and we don't want to
include that spare as active in the 5-drive RAID6 when the reversed
reshape completed and it will be mostly out-of-sync still.
Signed-off-by: NNeilBrown <neilb@suse.de>

The entries in the stripe_cache maintained by raid5 are enlarged
when we increased the number of devices in the array, but not
shrunk when we reduce the number of devices.
So if entries are added after reducing the number of devices, we
much ensure to initialise the whole entry, not just the part that
is currently relevant.  Otherwise if we enlarge the array again,
we will reference uninitialised values.

As grow_buffers/shrink_buffer now want to use a count that is stored
explicity in the raid_conf, they should get it from there rather than
being passed it as a parameter.
Signed-off-by: NNeilBrown <neilb@suse.de>

Only level 5 with layout=PARITY_N can be taken over to raid0 now.
Lets allow level 4 either.
Signed-off-by: NMaciej Trela <maciej.trela@intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

After takeover from raid5/10 -> raid0 mddev->layout is not cleared.
Signed-off-by: NMaciej Trela <maciej.trela@intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

Use mddev->new_layout in setup_conf.
Also use new_chunk, and don't set ->degraded in takeover().  That
gets set in run()
Signed-off-by: NMaciej Trela <maciej.trela@intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

Most array level changes leave the list of devices largely unchanged,
possibly causing one at the end to become redundant.
However conversions between RAID0 and RAID10 need to renumber
all devices (except 0).

This renumbering is currently being done in the ->run method when the
new personality takes over.  However this is too late as the common
code in md.c might already have invalidated some of the devices if
they had a ->raid_disk number that appeared to high.

Moving it into the ->takeover method is too early as the array is
still active at that time and wrong ->raid_disk numbers could cause
confusion.

So add a ->new_raid_disk field to mdk_rdev_s and use it to communicate
the new raid_disk number.
Now the common code knows exactly which devices need to be renumbered,
and which can be invalidated, and can do it all at a convenient time
when the array is suspend.
It can also update some symlinks in sysfs which previously were not be
updated correctly.
Reported-by: NMaciej Trela <maciej.trela@intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

Such NULL pointer dereference can occur when the driver was fixing the
read errors/bad blocks and the disk was physically removed
causing a system crash. This patch check if the
rcu_dereference() returns valid rdev before accessing it in fix_read_error().

Cc: stable@kernel.org
Signed-off-by: NPrasanna S. Panchamukhi <prasanna.panchamukhi@riverbed.com>
Signed-off-by: NRob Becker <rbecker@riverbed.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

Commit  b821eaa5 broke partition
detection for md arrays.

The logic was almost right.  However if revalidate_disk is called
when the device is not yet open, bdev->bd_disk won't be set, so the
flush_disk() Call will not set bd_invalidated.

So when md_open is called we still need to ensure that
->bd_invalidated gets set.  This is easily done with a call to
check_disk_size_change in the place where the offending commit removed
check_disk_change.  At the important times, the size will have changed
from 0 to non-zero, so check_disk_size_change will set bd_invalidated.
Tested-by: NDuncan <1i5t5.duncan@cox.net>
Reported-by: NDuncan <1i5t5.duncan@cox.net>
Signed-off-by: NNeilBrown <neilb@suse.de>

By the previous modification, the cpu notifier can return encapsulate
errno value.  This converts the cpu notifiers for raid5.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that the last user passing a NULL file pointer is gone we can remove
the redundant dentry argument and associated hacks inside vfs_fsynmc_range.

The next step will be removig the dentry argument from ->fsync, but given
the luck with the last round of method prototype changes I'd rather
defer this until after the main merge window.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The problem.  When implementing a network namespace I need to be able
to have multiple network devices with the same name.  Currently this
is a problem for /sys/class/net/*, /sys/devices/virtual/net/*, and
potentially a few other directories of the form /sys/ ... /net/*.

What this patch does is to add an additional tag field to the
sysfs dirent structure.  For directories that should show different
contents depending on the context such as /sys/class/net/, and
/sys/devices/virtual/net/ this tag field is used to specify the
context in which those directories should be visible.  Effectively
this is the same as creating multiple distinct directories with
the same name but internally to sysfs the result is nicer.

I am calling the concept of a single directory that looks like multiple
directories all at the same path in the filesystem tagged directories.

For the networking namespace the set of directories whose contents I need
to filter with tags can depend on the presence or absence of hotplug
hardware or which modules are currently loaded.  Which means I need
a simple race free way to setup those directories as tagged.

To achieve a reace free design all tagged directories are created
and managed by sysfs itself.

Users of this interface:
- define a type in the sysfs_tag_type enumeration.
- call sysfs_register_ns_types with the type and it's operations
- sysfs_exit_ns when an individual tag is no longer valid

- Implement mount_ns() which returns the ns of the calling process
  so we can attach it to a sysfs superblock.
- Implement ktype.namespace() which returns the ns of a syfs kobject.

Everything else is left up to sysfs and the driver layer.

For the network namespace mount_ns and namespace() are essentially
one line functions, and look to remain that.

Tags are currently represented a const void * pointers as that is
both generic, prevides enough information for equality comparisons,
and is trivial to create for current users, as it is just the
existing namespace pointer.

The work needed in sysfs is more extensive.  At each directory
or symlink creating I need to check if the directory it is being
created in is a tagged directory and if so generate the appropriate
tag to place on the sysfs_dirent.  Likewise at each symlink or
directory removal I need to check if the sysfs directory it is
being removed from is a tagged directory and if so figure out
which tag goes along with the name I am deleting.

Currently only directories which hold kobjects, and
symlinks are supported.  There is not enough information
in the current file attribute interfaces to give us anything
to discriminate on which makes it useless, and there are
no potential users which makes it an uninteresting problem
to solve.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Devices which know that they are spares do not really need to have
an event count that matches the rest of the array, so there are no
data-in-sync issues. It is enough that the uuid matches.
So remove the requirement that the event count is up-to-date.

We currently still write out and event count on spares, but this
allows us in a year or 3 to stop doing that completely.
Signed-off-by: NNeilBrown <neilb@suse.de>

When updating the event count for a simple clean <-> dirty transition,
we try to avoid updating the spares so they can safely spin-down.
As the event_counts across an array must be +/- 1, this means
decrementing the event_count on a dirty->clean transition.
This is not always safe and we have to avoid the unsafe time.
We current do this with a misguided idea about it being safe or
not depending on whether the event_count is odd or even.  This
approach only works reliably in a few common instances, but easily
falls down.

So instead, simply keep internal state concerning whether it is safe
or not, and always assume it is not safe when an array is first
assembled.
Signed-off-by: NNeilBrown <neilb@suse.de>

Fix: Raid-6 was not trying to correct a read-error when in
singly-degraded state and was instead dropping one more device, going to
doubly-degraded state. This patch fixes this behaviour.
Tested-by: NJanos Haar <janos.haar@netcenter.hu>
Signed-off-by: NGabriele A. Trombetti <g.trombetti.lkrnl1213@logicschema.com>
Reported-by: NJanos Haar <janos.haar@netcenter.hu>
Signed-off-by: NNeilBrown <neilb@suse.de>
Cc: stable@kernel.org

Some time ago we stopped the clean/active metadata updates
from being written to a 'spare' device in most cases so that
it could spin down and say spun down.  Device failure/removal
etc are still recorded on spares.

However commit 51d5668c broke this 50% of the time,
depending on whether the event count is even or odd.
The change log entry said:

   This means that the alignment between 'odd/even' and
    'clean/dirty' might take a little longer to attain,

how ever the code makes no attempt to create that alignment, so it
could take arbitrarily long.

So when we find that clean/dirty is not aligned with odd/even,
force a second metadata-update immediately.  There are already cases
where a second metadata-update is needed immediately (e.g. when a
device fails during the metadata update).  We just piggy-back on that.
Reported-by: NJoe Bryant <tenminjoe@yahoo.com>
Signed-off-by: NNeilBrown <neilb@suse.de>
Cc: stable@kernel.org

read_balance uses a "unsigned long" for a sector number which
will get truncated beyond 2TB.
This will cause read-balancing to be non-optimal, and can cause
data to be read from the 'wrong' branch during a resync.  This has a
very small chance of returning wrong data.
Reported-by: NJordan Russell <jr-list-2010@quo.to>
Cc: stable@kernel.org
Signed-off-by: NNeilBrown <neilb@suse.de>

  md/linear:mdname:
Signed-off-by: NNeilBrown <neilb@suse.de>

All messages now start
   md/raid0:md-device-name:
Signed-off-by: NNeilBrown <neilb@suse.de>

All raid10 printk messages now start
   md/raid10:md-device-name:
Signed-off-by: NNeilBrown <neilb@suse.de>

Make sure the array name is included in a uniform way in all printk
messages.
Signed-off-by: NNeilBrown <neilb@suse.de>

Many 'printk' messages from the raid456 module mention 'raid5' even
though it may be a 'raid6' or even 'raid4' array.  This can cause
confusion.
Also the actual array name is not always reported and when it is
it is not reported consistently.

So change all the messages to start:
    md/raid:%s:
where '%s' becomes e.g. md3 to identify the particular array.
Signed-off-by: NNeilBrown <neilb@suse.de>

RAID10 has been available for quite a while now and is quite well
tested, so we can remove the EXPERIMENTAL designation.
Reported-by: NEric MSP Veith <eveith@wwweb-library.net>
Signed-off-by: NNeilBrown <neilb@suse.de>

e.g. allow md to interpret 'echo 4 > md/level' as a request for raid4.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Level modifications change the output of mdstat.  The mdmon manager
thread is interested in these events for external metadata management.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

For consistency allow raid4 to takeover raid0 in addition to raid5 (with a
raid4 layout).
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

When a raid1 array is configured to support write-behind
on some devices, it normally only reads from other devices.
If all devices are write-behind (because the rest have failed)
it is possible for a read request to be serviced before a
behind-write request, which would appear as data corruption.

So when forced to read from a WriteMostly device, wait for any
write-behind to complete, and don't start any more behind-writes.
Signed-off-by: NNeilBrown <neilb@suse.de>

This message seems to suggest the named device is the one on which a
read failed, however it is actually the device that the read will be
redirected to.
So make the message a little clearer.
Reported-by: NTim Burgess <ozburgess@gmail.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

This is
 - unnecessary because mddev_suspend is always followed by a call to
   ->stop, and each ->stop unregisters the thread, and
 - a problem as it makes it awkwards to suspend and then resume a
   device as we will want later.
Signed-off-by: NNeilBrown <neilb@suse.de>

This is a simple factorisation that makes mddev_find easier to read.
Signed-off-by: NNeilBrown <neilb@suse.de>

We used to pass the personality make_request function direct
to the block layer so the first argument had to be a queue.
But now we have the intermediary md_make_request so it makes
at lot more sense to pass a struct mddev_s.
It makes it possible to have an mddev without its own queue too.
Signed-off-by: NNeilBrown <neilb@suse.de>

This moves the call to the other side of set_readonly, but that should
not be an issue.
This encapsulates in 'md_stop' all of the functionality for internally
stopping the array, leaving all the interactions with externalities
(sysfs, request_queue, gendisk) in do_md_stop.
Signed-off-by: NNeilBrown <neilb@suse.de>

Using do_md_stop to set an array to read-only is a little confusing.
Now most of the common code has been factored out, split
md_set_readonly off in to a separate function.
Signed-off-by: NNeilBrown <neilb@suse.de>

Further refactoring of do_md_stop.
This one requires some explanation as it takes code from different
places in do_md_stop, so some re-ordering happens.

We only get into this part of do_md_stop if there are no active opens
of the device, so no writes can be happening and the device must have
been flushed.  In md_stop_writes we want to stop any internal sources
of writes - i.e. resync - and flush out the metadata.

The only code that was previously before some of this code is
code to clean up the queue, the mddev, the gendisk, or sysfs, all
of which is probably better after code that makes active changes (i.e.
triggers writes).
Signed-off-by: NNeilBrown <neilb@suse.de>

do_md_stop is large and clunky, so hard to understand.

This is a first step of refactoring, pulling two simple
sub-functions out.
Signed-off-by: NNeilBrown <neilb@suse.de>