This also fixes a sparse warning that symbol 'result' shadows an earlier one.
Signed-off-by: NAndre Haupt <andre@bitwigglers.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Claim the interface for a USB to serial converter when the tty is open,
and release the interface when the tty is closed.

If a driver doesn't provide a resume function, use the generic resume
instead.

Make sure the generic resume function does not submit the URBs if we're
coming back from autosuspend.  On autoresume, we know that the open
function will be called next, which will attempt to submit the URBs.  If
we submit them in the resume function, the open will fail.

This works for:
 - autosuspend
 - suspending with the tty open or closed
 - hibernate with the tty closed

A hibernate (or a suspend that causes the USB subsystem to lose power)
has issues.  If you have the tty open when you hibernate, a new tty will
be created when the device re-enumerates during resume.
Signed-off-by: NSarah Sharp <sarah.a.sharp@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We now have pr_err(), pr_warning(), and friends ... start using
them in the gadget stack instead of printk(KERN_ERR) and friends.
This gives us shorter lines and somewhat increased readability.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1016) prevents PCI-based host controllers from
undergoing a power-state change during a FREEZE or a PRETHAW.  Such
changes are needed only during a SUSPEND.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1012b) makes the ksuspend_usbd kernel thread
non-freezable.  Since the PM core has been changed to lock all devices
during a system sleep, the thread no longer needs to be frozen.  It
won't interfere with a system sleep because before trying to resume a
root hub device, it acquires the device's lock.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Continue is not needed at the bottom of a loop.

The semantic patch implementing this change is as follows:

@@
@@

for (...;...;...) {
   ...
   if (...) {
     ...
-   continue;
   }
}
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Given that none of the referenced header files test the proprocessor
conditional __KERNEL__, there's no point "unifdef"fing them.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The usb serial method set_termios() is called for the first time from
open() method in order to set up the termios structure with the default
device's settings, ignoring the current settings. Once it's initialized,
the next set_termios() calls will update the device with the
tty->termios settings.
Currently USB serial console code calls the driver open() method without
a tty and after that will allocate a fake tty and termios so the command
line arguments can be applied to the device
(console=ttyUSB0,115200,...). This makes the driver overwrite the
termios with the default settings and not applying the command line
options.

This patch changes usb_console_setup() to allocate the fake tty and
termios before the open() method is called.

Tested successfully with a pl2303
Signed-off-by: NAristeu Rozanski <arozansk@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When a usb serial adapter is used as console, the usb serial console
driver bumps the open_count on the port struct used but doesn't attach
a real tty to it (only a fake one temporaly). If this port is opened later
using the regular character device interface, the open method won't
initialize the port, which is the expected, and will receive a brand new
tty struct created by tty layer, which will be stored in port->tty.

When the last close is issued, open_count won't be 0 because of the
console usage and the port->tty will still contain the old tty value. This
is the last ttyUSB<n> close so the allocated tty will be freed by the
tty layer. The usb_serial and usb_serial_port are still in use by the
console, so port_free() won't be called (serial_close() ->
usb_serial_put() -> destroy_serial() -> port_free()), so the scheduled
work (port->work, usb_serial_port_work()) will still run. And
usb_serial_port_work() does:
(...)
        tty = port->tty;
        if (!tty)
                return;

        tty_wakeup(tty);
which causes (manually copied):

Faulting instruction address: 0x6b6b6b68
Oops: Kernel access of bad area, sig: 11 [#1]
PREEMPT PowerMac
Modules linked in: binfmt_misc ipv6 nfs lockd nfs_acl sunrpc dm_snapshot dm_mirror dm_mod hfsplus uinput ams input_polldev genrtc cpufreq_powersave i2c_powermac therm_adt746x snd_aoa_codec_tas snd_aoa_fabric_layout snd_aoa joydev snd_aoa_i2sbus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc pmac_zilog serial_core evdev ide_cd cdrom snd appletouch soundcore snd_aoa_soundbus bcm43xx firmware_class usbhid ieee80211softmac ff_memless firewire_ohci firewire_core ieee80211 ieee80211_crypt crc_itu_t sungem sungem_phy uninorth_agp agpart ssb
NIP: 6b6b6b68 LR: c01b2108 CTR: 6b6b6b6b
REGS: c106de80 TRAP: 0400   Not tainted  (2.6.24-rc2)
MSR: 40009032 <EE,ME,IR,DR>  CR: 82004024  XER: 00000000
TASK = c106b4c0[5] 'events/0' THREAD: c106c000
GPR00: 6b6b6b6b c106df30 c106b4c0 c2d613a0 00009032 00000001 00001a00 00000001
GPR08: 00000008 00000000 00000000 c106c000 42004028 00000000 016ffbe0 0171a724
GPR16: 016ffcf4 00240e24 00240e70 016fee68 016ff9a4 c03046c4 c0327f50 c03046fc
GPR24: c106b6b9 c106b4c0 c101d610 c106c000 c02160fc c1eac1dc c2d613ac c2d613a0
NIP [6b6b6b68] 0x6b6b6b68
LR [c01b2108] tty_wakeup+0x6c/0x9c
Call Trace:
[c106df30] [c01b20e8] tty_wakeup+0x4c/0x9c (unreliable)
[c106df40] [c0216138] usb_serial_port_work+0x3c/0x78
[c106df50] [c00432e8] run_workqueue+0xc4/0x15c
[c106df90] [c0043798] worker_thread+0xa0/0x124
[c106dfd0] [c0048224] kthread+0x48/0x84
[c106dff0] [c00129bc] kernel_thread+0x44/0x60
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
Slab corruption: size-2048 start=c2d613a0, len=2048
Redzone: 0x9f911029d74e35b/0x9f911029d74e35b.
Last user: [<c01b16d8>](release_one_tty+0xbc/0xf4)
050: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
Prev obj: start=c2d60b88, len=2048
Redzone: 0x9f911029d74e35b/0x9f911029d74e35b.
Last user: [<c00f30ec>](show_stat+0x410/0x428)
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b

This patch avoids this, clearing port->tty considering if the port is
used as serial console or not
Signed-off-by: NAristeu Rozanski <arozansk@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently usb serial console support ignores the device and always use
ttyUSB0.
Signed-off-by: NAristeu Rozanski <arozansk@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

here's a minor update to the cypress_cy7c63 driver
providing new contact and usage information.


From: Oliver Bock <bock@tfh-berlin.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

G_PRINTER: Adds a USB printer gadget driver for use in printer firmware.

This adds a USB printer gadget driver for use in printer firmware.
The printer gadget channels data between the USB host and a userspace
program driving the print engine. The user space program reads and
writes the device file /dev/g_printer to receive or send printer data.
It can use ioctl calls to the device file to get or set printer status.
Signed-off-by: NCraig W. Nadler <craig@nadler.us>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1011) adds a #define for the newly-created Lockable
(i.e., password-protected) subclass 0x07 for USB mass-storage devices.
The private ISD200 entry (which had been mapped to subclass 0x07) is
moved to 0xf0, which is unlikely to conflict with any official
subclass designation.

The US_SC_MIN and US_SC_MAX constants aren't used anywhere, so the
patch removes them.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NDavid Brownell <david-b@pacbell.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add support for SuperH SH7722 USB Function.

M66592 is similar to SH7722 USBF. It can support SH7722 USBF by
changing several M66592 code.
Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Acked-by: NDavid Brownell <david-b@pacbell.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

TI 3410/5052 USB Serial: convert semaphore td_open_close_lock to the mutex
API.
Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The current omap udc dosen't support the DMA mode and it has some problem
at setup time on OMAP2 with previous patch file.  I found that the code
assumes bulk out required the big data transfer.  But MODE SELECT(6) sent
the only 24 bytes.  it makes a problem.  So I implement the small packets
handling for it.

It is tested with both linux and windows.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- make the needlessly global struct mon_fops_binary static
- #if 0 the unused mon_bin_mmap() and related code
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg KH <greg@kroah.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- 'irq' argument is merely used in place of a constant; replace its usage
  with that constant.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove dead code while at it.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove dead code while at it.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Greg KH <greg@kroah.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlain Degreffe <eczema@ecze.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now that commit 3794ade5 removed
incorrect dependency on CONFIG_IDE we can fix the driver to not
include <linux/ide.h>:

* add ATA_REG_{ERROR,LCYL,HCYL,STATUS}_OFFSET defines and use them
  instead of IDE_{ERROR,LCYL,HCYL,STATUS}_OFFSET from <linux/ide.h>

* remove no longer needed <linux/ide.h> include

* remove incorrect comment added by the last commit:
  - isd200.c is not the only user of struct hd_driveid besides IDE
    (see drivers/block/xsysace.c and arch/um/drivers/ubd_kern.c)

Cc: Alan Cox <alan@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Here we go. This patch implements suspend/resume and autosuspend
for the CDC ACM driver.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

These zeroings were taken from usb-storage long time ago. I examined
the submission paths and usb_fill_bulk_urb and found them unnecessary.
Signed-off-by: NPete Zaitcev <zaitcev@yahoo.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert from class_device to device for drivers/usb/core.
Signed-off-by: NTony Jones <tonyj@suse.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some crazy devices in the wild have a vendor id of 0x0000.  If we try to
add a module alias with this id, we just can't do it due to a check in
the file2alias.c file.  Change the test to verify that both the vendor
and product ids are 0x0000 to show a real "blank" module alias.

Note, the module-init-tools package also needs to be changed to properly
generate the depmod tables.

Cc: Janusz <janumix@poczta.fm>
Cc: stable <stable@kernel.org>
Cc: Jon Masters <jcm@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

usbtest did not swap the received status information when checking for
a non-zero value and failed to discover halted endpoints on big endian
systems.

Cc: stable <stable@kernel.org>
Signed-off-by: NJan Andersson <jan@gaisler.com>
Acked-by: NDavid Brownell <david-b@pacbell.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add "FIX_CAPACITY" entry for HP Photosmart r707 Camera in "Disk" mode.
Camera will wedge when /lib/udev/vol_id attempts to access the last sector,
EIO gets reported to dmesg, and block device is marked "offline" (it is).
Reproduced vol_id behavior with:
	"dd if=/dev/sda of=/dev/null skip=60800 count=1"

Cc: stable <stable@kernel.org>
Signed-off-by: NGrant Grundler <grundler@parisc-linux.org>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I've got a Dell wireless 5520 card with a different USB ID - specifically, 8136
instead of 8137. Attached a small patch to add support, and the output of an
'ati3'.

If we could get this in, that'd be sweet.  ;)  Thanks!

nc@knight:~/tmp/linux-2.6.24-rc8/drivers/usb/serial$ lsusb | grep 8136
	Bus 001 Device 005: ID 413c:8136 Dell Computer Corp.
nc@knight:~/tmp/linux-source-2.6.23/drivers/usb/serial$ cu -l ttyUSB0 -s 115200
	Connected.
	ati3
	Manufacturer: Novatel Wireless Incorporated
	Model: Expedite EU860D MiniCard
	Revision: 10.10.04.01-01  [2007-04-11 14:07:19]
	IMEI: 011186000228043
	+GCAP: +CGSM,+DS,+ES

From: Nate Carlson <natecars@natecarlson.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this function will run in the context of the scsi error handler thread.
It must use GFP_NOIO instead of GFP_KERNEL to avoid a possible
deadlock.

Cc: stable <stable@kernel.org>
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added support for the Elster Unicom III Optical Probe.
The device ID has already been added to the usb.ids file.

Cc: stable <stable@kernel.org>
Signed-off-by: NEd Beroset <beroset@mindspring.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

pl2303: add support for RATOC REX-USB60F

This patch adds support for RATOC REX-USB60F Serial Adapters,
which is widely used in Japan recently.

Cc: stable <stable@kernel.org>
Signed-off-by: NAkira Tsukamoto <akirat@rd.scei.sony.co.jp>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove entry for Huawei E620 UMTS/HSDPA card (ID: 12d1:1001) in pl2303 driver
Option driver is use instead

Cc: stable <stable@kernel.org>
Signed-off-by: NDaniel Kozák <kozzi11@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added support for Onda H600/Zte MF330 GPRS/UMTS/HSDPA datacard

Cc: stable <stable@kernel.org>
Signed-off-by: NBruno Redondi <bruno.redondi@altarisoluzione.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

little patches only to add vendor/device id of ATK_16IC CCD cam for
astronomy.

From: Franco Lanza <nextime@nexlab.it>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I work with a group of people on a free home automation tool called
FHEM.  Some of the users own more than one USB-serial device by ELV. The
ftdi_sio driver has most of the ELV devices disabled by default and
needs to be re-enabled every time you get a new kernel. Additionally a
new device (EM 1010 PC - enegry monitor) is missing in the list.
Currently our users have to follow the instructions we provide at
http://www.koeniglich.de/fhem/linux.html ... However, to some users it
is too complicated to compile their own kernel module.

We are aware that you can specify one additional device using the
vendor/product option of the module. But lot's of users own more than
one device.

Cc: stable <stable@kernel.org>
Signed-off-by: NPeter Stark <peter.stark@t-online.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch corrects the wrong function name mentioned in the comments
of usb_unregister_notify function.
Signed-off-by: NManish Katiyar <mkatiyar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The following improvements were made:
 - Added new product support: MC5725, AC 880 U, MP 3G (UMTS & CDMA)

Cc: stable <stable@kernel.org>
Signed-off-by: NKevin Lloyd <linux@sierrawireless.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This simply adds the "YC Cable" as a vendor and its pl2303-based
USB<->Serial adapter as a product.  This particular adapter is sold by
Radio Shack.  I've done limited testing on a few different systems with
no issues.

Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>