The ad7170/ad7171 have a software interface similar to the ad7780. They do not
have an external pin which allows to change the internal gain and the what is
used for the gain bit in the ad7780/ad7781 becomes part of the check pattern.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Some designs hardwire the PDRST pin to always on. In this case there is no GPIO
to control the mode of the device, so make the GPIO optional. Since now all of
the the platform data fields are optional now, make the platform data as a whole
optional as well.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

In the Linux device driver model the remove callback is not allowed to fail and
the device will be removed regardless of the return value of the remove
callback. So if we abort in the remove function and do not free all resources we
will create a resource leak. Also all kinds of undefined behaviour are expected
to happen since the IIO device is still there while its parent is already gone.

The errors which the driver tries to handle in the remove function are
non-critical, so we can just ignore them and continue to free all resources and
remove the IIO device.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

In the Linux device driver model the remove callback is not allowed to fail and
the device will be removed regardless of the return value of the remove
callback. So if we abort in the remove function and do not free all resources we
will create a resource leak. Also all kinds of undefined behaviour are expected
to happen since the IIO device is still there while its parent is already gone.

The errors which the driver tries to handle in the remove function are
non-critical, so we can just ignore them and continue to free all resources and
remove the IIO device.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

In the Linux device driver model the remove callback is not allowed to fail and
the device will be removed regardless of the return value of the remove
callback. So if we abort in the remove function and do not free all resources we
will create a resource leak. Also all kinds of undefined behaviour are expected
to happen since the IIO device is still there while its parent is already gone.

The error which the driver tries to handle in the remove function is
non-critical, so we can just ignore it and continue to free all resources and
remove the IIO device.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

In the Linux device driver model the remove callback is not allowed to fail and
the device will be removed regardless of the return value of the remove
callback. So if we abort in the remove function and do not free all resources we
will create a resource leak. Also all kinds of undefined behaviour are expected
to happen since the IIO device is still there while its parent is already gone.

The error which the driver tries to handle in the remove function is
non-critical, so we can just ignore it and continue to free all resources and
remove the IIO device.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

In the Linux device driver model the remove callback is not allowed to fail and
the device will be removed regardless of the return value of the remove
callback. So if we abort in the remove function and do not free all resources we
will create a resource leak. Also all kinds of undefined behaviour are expected
to happen since the IIO device is still there while its parent is already gone.

The error which the driver tries to handle in the remove function is
non-critical, so we can just ignore it and continue to free all resources and
remove the IIO device.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

In the Linux device driver model the remove callback is not allowed to fail and
the device will be removed regardless of the return value of the remove
callback. So if we abort in the remove function and do not free all resources we
will create a resource leak. Also all kinds of undefined behaviour are expected
to happen since the IIO device is still there while its parent is already gone.

The error which the driver tries to handle in the remove function is
non-critical, so we can just ignore it and continue to free all resources and
remove the IIO device.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

In the Linux device driver model the remove callback is not allowed to fail and
the device will be removed regardless of the return value of the remove
callback. So if we abort in the remove function and do not free all resources we
will create a resource leak. Also all kinds of undefined behaviour are expected
to happen since the IIO device is still there while its parent is already gone.

The error which the driver tries to handle in the remove function is
non-critical, so we can just ignore it and continue to free all resources and
remove the IIO device.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

In the Linux device driver model the remove callback is not allowed to fail and
the device will be removed regardless of the return value of the remove
callback. So if we abort in the remove function and do not free all resources we
will create a resource leak. Also all kinds of undefined behaviour are expected
to happen since the IIO device is still there while its parent is already gone.

The error which the driver tries to handle in the remove function is
non-critical, so we can just ignore it and continue to free all resources and
remove the IIO device.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

 When the IIO consumer tries to get specific IIO channel,
 few error cases can be happened.
 (a) Memory allocation failure
 (b) No matched ADC channel error
 (c) Invalid input arguments
 This patch enables cleaning up error handling in case of (a) and (b).

 In error handling code,
 (a): the reference count of the IIO device should be decreased.
 (b): the allocated memory should be freed with restoring the reference count.
 Therefore iio_deivce_put() is called in both cases.
 This can be handled in the last error statement.

 Additionally, integer variable is used for stating each error case explicitly.
 Then, the error returns as ERR_PTR() with this value.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

 The reference count of the IIO device is increased if the IIO map has
 matched consumer name.
 After then, it tries to allocate the iio_channel which is used by the consumer.
 If it fails to allocate memory, the reference count should be decreased.

 This patch enables restoring the reference count of the IIO device.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

We need "ret" to be signed for the error handling to work correctly.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

When hid sensor hub is unplugged, there is a crash in
iio_device_unregister_trigger_consumer.
In a typical IIO driver when remove is called, it will unregister and free
trigger and then it will call iio_device_free.
The function iio_trigger_free() will free the allocated memory for trigger.
If this trigger was assigned to iio_dev->trig, then it should be set to NULL.
Othewise when iio_device_free() is called later, it finally calls
iio_device_unregsister_trigger(), which checks for
       if (indio_dev->trig)
                iio_trigger_put(indio_dev->trig);
If indio_dev->trig is not set to NULL, it calls iio_trigger_put on a bad
pointer causing crash.
This scenerio can happen in any driver, which is storing trigger pointer in
iio_dev structure and following current procedure during remove.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

"report_id" is unsigned so it's never less than zero.  These checks can
be removed without any problem.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

We're holding a spinlock here so we can't call kmalloc() with
GFP_KERNEL.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

As discussed at the kernel summit this year, CONFIG_EXPERIMENTAL means
nothing, so let's get rid of it.

Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Properly check the return value of copy_from/to_user() and handle any
errors that might happen.

This removes a bunch of compiler warnings.

Cc: Alois Schlögl <alois.schloegl@ist.ac.at>
Cc: Greg P. Smith <greg@ced.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A basic Lindent run on the .c files, clean up the .h file by hand.

Cc: Alois Schlögl <alois.schloegl@ist.ac.at>
Cc: Greg P. Smith <greg@ced.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds the ced1401 driver to the build system.

Yes, there are a lot of warning messages, but it does compile, so it
should be good to get going.

Cc: Alois Schlögl <alois.schloegl@ist.ac.at>
Cc: Greg P. Smith <greg@ced.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds a first cut of a TODO file to get this driver out of the
staging directory.

Cc: Alois Schlögl <alois.schloegl@ist.ac.at>
Cc: Greg P. Smith <greg@ced.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes up the usb1401.c file to remove the usage of err() (which is
gone), and the two-argument kmap_atomic() call, and the compat_ioctl
pointer warning.

The code now builds properly, there are lots of warnings still, but it's
a start.

Cc: Alois Schlögl <alois.schloegl@ist.ac.at>
Cc: Greg P. Smith <greg@ced.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This was imported from the
http://pub.ist.ac.at/~schloegl/src/ced1401/.git git repo at the request
of Alois.  The driver originally came from Cambridge Electronic Design
Ltd and was authored by Greg P Smith and others, but Alois did the
maintance work to get it into a semi-building state and pushed to get it
into the main kernel tree here.

Cc: Alois Schlögl <alois.schloegl@ist.ac.at>
Cc: Greg P. Smith <greg@ced.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Quiet some sparse warnings about:

warning: Using plain integer as NULL pointer
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pointer variables should be cleared with NULL on 0. This quiets
some sparse warnings about:

warning: Using plain integer as NULL pointer
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These messages are just added noise.

They also cause some sparse warnings due to MAX_ASICS evaluating
as 1. This causes the local variable 'irq' to be 'unsigned int irq[1]',
which makes the 'irq[1]' access invalid.

Just remove the messages.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The function mite_fifo_size() is only referenced in this file. Make
it static.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The symbol ni_mio_cs_driver is only referenced in this file. Make
it static.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The symbol labpc_cs_driver and the functions labpc_init_module()
and labpc_exit_module() are only referenced in this file. Make
them static.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The symbol dio24_cs_driver is only referenced in this file. Make
it static.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The function ni_pcidio_event() is only referenced in this file.
Make it static.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The function ni_660x_release_mite_channel() is only referenced in
this file. Make it static.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The function read_idm_word() is only referenced in this file.
Make it static.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Leave the enum's but remove their names. The names are not used
anywhere in the driver.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The functions ni_release_gpct_mite_channel() and ni_prime_channelgain_list()
are only referenced in this file. Make it static.

The function ni_release_gpct_mite_channel() is also only called
when PCIDMA is enabled. Move the #ifdef to quite a sparse warning
about the function not being used.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The function do_become_nonbusy() is only referenced in this file.
Make it static.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch erases smtc_VRAMBaseAddress variable.
Signed-off-by: NJavier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch renames pFramebufferPhysical name to mmio_base.
Signed-off-by: NJavier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch improves naming style and comments on smtcfb_info fields.
Signed-off-by: NJavier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>