This patch introduces the C-language equivalents of the functions below:

void set_bit(int nr, volatile unsigned long *addr);
void clear_bit(int nr, volatile unsigned long *addr);
void change_bit(int nr, volatile unsigned long *addr);
int test_and_set_bit(int nr, volatile unsigned long *addr);
int test_and_clear_bit(int nr, volatile unsigned long *addr);
int test_and_change_bit(int nr, volatile unsigned long *addr);

In include/asm-generic/bitops/atomic.h

This code largely copied from:

include/asm-powerpc/bitops.h
include/asm-parisc/bitops.h
include/asm-parisc/atomic.h
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Bitmap functions for the minix filesystem and the ext2 filesystem except
ext2_set_bit_atomic() and ext2_clear_bit_atomic() do not require the atomic
guarantees.

But these are defined by using atomic bit operations on several architectures.
 (cris, frv, h8300, ia64, m32r, m68k, m68knommu, mips, s390, sh, sh64, sparc,
sparc64, v850, and xtensa)

This patch switches to non atomic bit operation.
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

remove unnecessary local_irq_restore() after cris_atomic_restore() in
test_and_set_bit().
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Noticed by Michael Tokarev

add missing ()-pair in __ffz() macro for parisc
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

__set_bit() --> cpu_set() cleanup
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use config options instead of gcc builtin definition to tell the use of
instruction set extensions (CIX and FIX).

This is introduced to tell the kbuild system the use of opmized hweight*()
routines on alpha architecture.
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sound/oss/sonicvibes.c:421: error: static declaration of hweight32 follows non-static declaration
include/asm-generic/bitops/hweight.h:6: error: previous declaration of hweight32 was here
Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch defines constant_fls() instead of removed generic_fls().
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Build fix for user mode linux.
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

s/fucntion/function/ typo fixes
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix warning messages triggered by bitops code consolidation patches.
cxn_bitmap is the array of unsigned long.  '&' is unnesesary for the argument
of *_bit() routins.
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It's about to go away.

Cc: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change all instances of EXPORT_SYMBOL() in the core EDAC module to
EXPORT_SYMBOL_GPL().
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Add entries to MAINTAINERS list for EDAC-E752X, EDAC-E7XXX, and
  EDAC-R82600 chipset drivers

- Fix MAINTAINERS entry for EDAC-CORE so it uses tabs rather than
  spaces to indent.  This is consistent with how the other entries are
  formatted.
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Dave Jiang <djiang@mvista.com>: Fix EDAC e752x driver so it
outputs sysbus-specific error message when sysbus error detected.
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix spelling errors in EDAC documentation.
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Cosmetic indentation/formatting cleanup for EDAC code.  Make sure we
are using tabs rather than spaces to indent, etc.
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix EDAC code so EXPORT_SYMBOL comes after the function that is being
exported.  This is to maintain consistency with the rest of the kernel.
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Add x86 dependency in drivers/edac/Kconfig for all current
  platform-specific modules.

- Add PCI dependency to Radisys 82600 driver
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Fix code so we always hold mem_ctls_mutex while we are stepping
  through the list of mem_ctl_info structures.  Otherwise bad things
  may happen if one task is stepping through the list while another
  task is modifying it.  We may eventually want to use reference
  counting to manage the mem_ctl_info structures.  In the meantime we
  may as well fix this bug.

- Don't disable interrupts while we are walking the list of
  mem_ctl_info structures in check_mc_devices().  This is unnecessary.
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- After we unregister a kobject, wait for our kobject release method
  to call complete().  This causes us to wait until the kobject
  reference count reaches 0.  Otherwise, a task accessing the EDAC
  sysfs interface can hold the reference count above 0 until after the
  EDAC module has been unloaded.  When the reference count finally
  drops to 0, this will result in an attempt to call our release
  method inside the EDAC module after the module has already been
  unloaded.

  This isn't the best fix, since a process can get stuck sleeping forever
  uninterruptibly if the user does the following:

      rmmod my_module < /sys/my_sysfs/file

  I'll go back and implement a better fix later.  However this should
  be ok for now.

- Call edac_remove_sysfs_mci_device() from edac_mc_del_mc() rather
  than from edac_mc_free().  Since edac_mc_add_mc() calls
  edac_create_sysfs_mci_device(), edac_mc_del_mc() should call
  edac_remove_sysfs_mci_device().
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Remove calls to kobject_init().  These are unnecessary because
  kobject_register() calls kobject_init().

- Remove extra calls to kobject_put().  When we call
  kobject_unregister(), this releases our reference to the kobject.
  The extra calls to kobject_put() may cause the reference count to
  drop to 0 while a kobject is still in use.
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is part 2 of a 2-part patch set.

Fix edac_mc_add_mc() so it cleans up properly if call to
edac_create_sysfs_mci_device() fails.
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is part 1 of a 2-part patch set.  The code changes are split into
two parts to make the patches more readable.

Move complete_mc_list_del() and del_mc_from_global_list() so we can
call del_mc_from_global_list() from edac_mc_add_mc() without forward
declarations.  Perhaps using forward declarations would be better?
I'm doing things this way because the rest of the code is missing
them.
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix xxx_probe1() functions so they call xxx_get_error_info() functions
to clear initial errors.  This is simpler and cleaner than duplicating
the low-level code for accessing PCI config space.
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix minor logic bug in e7xxx_remove_one().
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Fix i82875p_probe1() so it calls pci_get_device() instead of
  pci_find_device().
- Fix i82875p_probe1() so it cleans up properly on failure.
- Fix i82875p_init() so it cleans up properly on failure.
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Fix i82860_init() so it cleans up properly on failure.
- Fix i82860_exit() so it cleans up properly.
- Fix typo in comment (i.e. www.redhat.com.com).
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Add ctl_dev field to "struct e752x_dev_info".  Then we can eliminate
  ugly switch statement from e752x_probe1().

- Remove code from e752x_probe1() that clears initial PCI bus parity
  errors.  The core EDAC module already does this.
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Eliminate unnecessary calls to pci_dev_get() and pci_dev_put() from
amd76x driver.
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Perform the following name substitutions on all source files:

    sed 's/BS_MOD_STR/EDAC_MOD_STR/g'
    sed 's/bs_thread_info/edac_thread_info/g'
    sed 's/bs_thread/edac_thread/g'
    sed 's/bs_xstr/edac_xstr/g'
    sed 's/bs_str/edac_str/g'

The names that start with BS_ or bs_ are artifacts of when the code
was called "bluesmoke".
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This implements the following idea:

On Monday 30 January 2006 19:22, Eric W. Biederman wrote:
> One piece missing from this conversation is the issue that we need errors
> in a uniform format.  That is why edac_mc has helper functions.
>
> However there will always be errors that don't fit any particular model.
> Could we add a edac_printk(dev, );  That is similar to dev_printk but
> prints out an EDAC header and the device on which the error was found?
> Letting the rest of the string be user specified.
>
> For actual control that interface may be to blunt, but at least for people
> looking in the logs it allows all of the errors to be detected and
> harvested.
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch was originally posted by Christoph Hellwig (see
http://lkml.org/lkml/2006/2/14/331):

"Christoph Hellwig" <hch@lst.de> wrote:
> Use the kthread_ API instead of opencoding lots of hairy code for kernel
> thread creation and teardown, including tasklist_lock abuse.
>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Peterson <dsp@llnl.gov>
Cc: <dave_peterson@pobox.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes coverity id #2.  the if (i==0) is pretty useless, since we
assing i=0, just the line before.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

And: Tilman Schmidt <tilman@imap.cc>

This patch adds the connection-specific module "usb_gigaset", the hardware
driver for Gigaset base stations connected via the M105 USB DECT adapter.  It
contains the code for handling probe/disconnect, AT command/response
transmission, and call setup and termination, as well as handling asynchronous
data transfers, PPP framing, byte stuffing, and flow control.
Signed-off-by: NHansjoerg Lipp <hjlipp@web.de>
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Cc: Karsten Keil <kkeil@suse.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

And: Tilman Schmidt <tilman@imap.cc>

This patch adds the payload data handler for the connection-specific module
"bas_gigaset".  It contains the code for handling isochronous data transfers,
HDLC framing and flow control.
Signed-off-by: NHansjoerg Lipp <hjlipp@web.de>
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Cc: Karsten Keil <kkeil@suse.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

And: Tilman Schmidt <tilman@imap.cc>

This patch adds the main source file of the connection-specific module
"bas_gigaset", the hardware driver for Gigaset base stations connected
directly to the computer via USB.  It contains the code for handling
probe/disconnect, AT command/response transmission, and call setup and
termination.
Signed-off-by: NHansjoerg Lipp <hjlipp@web.de>
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Cc: Karsten Keil <kkeil@suse.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

And: Tilman Schmidt <tilman@imap.cc>

This patch adds the procfs interface to the gigaset module.  The procfs
interface provides access to status information and statistics about the
Gigaset devices.  If the drivers are built with the debugging option it also
allows to change the amount of debugging output on the fly.
Signed-off-by: NHansjoerg Lipp <hjlipp@web.de>
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Cc: Karsten Keil <kkeil@suse.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

And: Tilman Schmidt <tilman@imap.cc>

This patch adds the tty interface to the gigaset module.  The tty interface
provides direct access to the AT command set of the Gigaset devices.
Signed-off-by: NHansjoerg Lipp <hjlipp@web.de>
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Cc: Karsten Keil <kkeil@suse.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

And: Tilman Schmidt <tilman@imap.cc>

This patch adds the isdn4linux subsystem interface to the gigaset module.  The
isdn4linux subsystem interface handles requests from and notifications to the
isdn4linux subsystem.
Signed-off-by: NHansjoerg Lipp <hjlipp@web.de>
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Cc: Karsten Keil <kkeil@suse.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>