提交 · 7a8576204333d133d58cbcc59dacf49a5546e3e4 · openeuler / raspberrypi-kernel

10 7月, 2008 3 次提交

[ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC drivers · 7a857620

由 Philipp Zabel 提交于 6月 22, 2008

The pxa2xx_udc.c driver is renamed to pxa25x_udc.c (the platform
driver name changes from pxa2xx-udc to pxa25x-udc) and the
platform driver name of pxa27x_udc.c is fixed to pxa27x-udc.
pxa_device_udc in devices.c is split into pxa25x and pxa27x flavors
and the pxa27x_device_udc is enabled in pxa27x.c.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Acked-by: NNicolas Pitre <nico@cam.org>
Acked-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Including from Ian Molton:

Fixes for mistakes left over from the PXA2{5,7}X UDC split.
Signed-off-by: NIan Molton <spyro@f2s.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

7a857620

[ARM] 5147/1: pxaficp_ir: drop pxa_gpio_mode calls, as pin setting · 73d1a2c4

由 Dmitry Baryshkov 提交于 7月 02, 2008

	is handled in board code
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

73d1a2c4

[ARM] 5144/1: pxaficp_ir: cleanup includes · 330ff197

由 Dmitry Baryshkov 提交于 7月 02, 2008

Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

330ff197

07 7月, 2008 2 次提交

[ARM] 5135/1: pxa: drop superfluous asm/arch/pxa2xx-gpio.h includes · f1b23586

由 Philipp Zabel 提交于 6月 30, 2008

Both i2c-pxa.c and irq.c still include pxa2xx-gpio.h although is is not
needed anymore.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Acked-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

f1b23586

[ARM] 5118/1: pxafb: add exit and remove handlers · 9f17f287

由 Jaya Kumar 提交于 6月 22, 2008

This patch adds exit and remove handlers to pxafb so that it can be loaded
and unloaded as a module.
Signed-off-by: NJaya Kumar <jayakumar.lkml@gmail.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

9f17f287

03 7月, 2008 3 次提交

[ARM] 5141/1: PWM: pwm_request() should return an PTR_ERR() instead of NULL. · 43bda1a6

由 Ben Dooks 提交于 7月 01, 2008

Make the return of pwm_request() be more informative than just
being NULL on error by using PTR_ERR() to respond with an
approriate error.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

43bda1a6

[ARM] 5044/1: pwm_bl: add init/notify/exit callbacks · 3b73125a

由 Philipp Zabel 提交于 5月 22, 2008

This allows platform code to manipulate GPIOs and brightness level as
needed.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

3b73125a

[ARM] pxa: add generic PWM backlight driver · 42796d37

由 eric miao 提交于 4月 14, 2008

Patch mostly from Eric Miao, with minor edits by rmk to convert
Eric's driver to a generic PWM-based backlight driver.
Signed-off-by: Neric miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

42796d37

16 6月, 2008 1 次提交

[ARM] 5080/1: touch PSSR_OTGPH only on pxa27x in ohci-pxa27x and pxa27x_udc · d438ae57

由 Philipp Zabel 提交于 6月 06, 2008

and include pxa2xx-regs.h as build fix since PSSR definitions
moved from pxa-regs.h into pxa2xx-regs.h.

Note: This change is temporary as pxa27x processor specific
code will be finally moved elsewhere (both drivers should
support pxa3xx, too).
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Acked-by: NEric Miao <eric.y.miao@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

d438ae57

03 6月, 2008 1 次提交

[ARM] 5075/1: i2c-pxa: move i2c pin setup and PCFR_PI2CEN handling into arch/arm/mach-pxa · bc3a5959

由 Philipp Zabel 提交于 6月 02, 2008

This fixes a build error introduced when the power manager
register definitions were moved into pxa2xx-regs.h.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

bc3a5959

02 6月, 2008 2 次提交

[ARM] pxa: avoid kfreeing static data if platform device fails to register · 4e5e8de0

由 Russell King 提交于 4月 24, 2008

When a dynamically allocated platform device is 'put', the platform
device's platform_data is kfree'd.  This is bad if it's pointing at
static data.  Use the provided function to register platform data
for these devices.

This also means we can mark the pcmcia ops structures as __initdata.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

4e5e8de0

[ARM] pxa: avoid registering multiple pxa2xx_pcmcia devices · 04ba0f65

由 Russell King 提交于 4月 24, 2008

cm_x270 and mainstone both register their PCMCIA devices using the same
name, resulting in a warning message from the kernel.  Avoid this by
making the cm_x270 and mainstone PCMCIA initialisation conditional on
the machine type we're running on.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

04ba0f65

19 5月, 2008 14 次提交

[ARM] pxa: separate PXA25x and PXA27x UDC register definitions · 284d115e

由 Russell King 提交于 4月 20, 2008

The PXA25x and PXA27x USB device controller register definitions are
different. Currently, they live side by side in pxa-regs.h, but only
one set is available depending on the setting of PXA25x or PXA27x.

This means that if we build to support both PXA25x and PXA27x, the
PXA27x definitions are unavailable, even to PXA27x specific code.

Remove these definitions from pxa-regs.h, and place them in separate
files. Include these files where appropriate.

Note: according to the dependencies in drivers/usb/gadget/Kconfig,
we do not support the UDC on PXA27x nor PXA3xx CPUs, so remove the
platform devices from pxa27x.c and pxa3xx.c.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

284d115e

m68k: Return -ENODEV if no device is found · fd5b462f

由 Geert Uytterhoeven 提交于 5月 18, 2008

According to the tests in do_initcalls(), the proper error code in case no
device is found is -ENODEV, not -ENXIO or -EIO.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fd5b462f

m68k: Some input drivers do not check the platform · eb98630b

由 Geert Uytterhoeven 提交于 5月 18, 2008

Some input drivers do not check whether they're actually running on the
correct platform, causing multi-platform kernels to crash if they are not.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

eb98630b

m68k: Some network drivers do not check the platform · 0f734484

由 Geert Uytterhoeven 提交于 5月 18, 2008

Some network drivers do not check whether they're actually running on the
correct platform, causing multi-platform kernels to crash if they are not.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

0f734484

m68k: dnfb doesnt check for Apollo · d6497700

由 Geert Uytterhoeven 提交于 5月 18, 2008

The Apollo frame buffer device driver (dnfb) doesn't check whether it's
actually running on Apollo hardware, causing a crash if it isn't.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

d6497700

m68k: macide doesnt check for Mac · 3ce92a2a

由 Geert Uytterhoeven 提交于 5月 18, 2008

The Macintosh IDE driver (macide) doesn't check whether it's actually running
on Mac hardware, causing a crash if it isn't.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

3ce92a2a

m68k vme_scc: avoid global namespace pollution · eb4db450

由 Geert Uytterhoeven 提交于 5月 18, 2008

m68k vme_scc:
  - make scc_ports[] static
  - kill unused global scc_initialized
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

eb4db450

m68k: FB_HP300 depends on DIO and doesnt need FB_CFB_FILLRECT · ad7e484f

由 Geert Uytterhoeven 提交于 5月 18, 2008

Correct FB_HP300 dependencies:
  - FB_HP300 doesn't depend only on HP300, but also on DIO (which depends on
    HP300)
  - FB_HP300 does not need FB_CFB_FILLRECT
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ad7e484f

m68k: Kill CONFIG_FB_DAFB · 8d13e5ca

由 Geert Uytterhoeven 提交于 5月 18, 2008

CONFIG_FB_DAFB is a leftover from pre-Kconfig
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

8d13e5ca

i2c/max6875: Really prevent 24RF08 corruption · 70455e79