- 29 4月, 2011 7 次提交
-
-
由 Johan Hedberg 提交于
This patch adds automated negative and positive (auto-accept) responses for Secure Simple Pairing user confirmation requests. The responses are only sent if the HCI_MGMT flag is set in order not to confuse older user space versions (without management interface support). Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Waldemar Rymarkiewicz 提交于
Extend the mgmt_pin_code_request interface to require secure pin code (16 digit) for authentication. This is a kernel part of the secure pin code requirement notification to user space agent. Code styling fix by Johan Hedberg. Signed-off-by: NWaldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Waldemar Rymarkiewicz 提交于
If host requires MITM protection notify that to controller in io capabilities reply even if the remote device requires no bonding. If it is not respected, host can get an unauthenticated link key while it expects authenticated one. Signed-off-by: NWaldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Waldemar Rymarkiewicz 提交于
High security level for pre v2.1 devices requires combination link key authenticated by at least 16 digit PIN code. It's also necessary to update key_type and pin_length when the key exists and is sufficently secured for the connection as there will be no link key notify event in that case. Signed-off-by: NWaldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Waldemar Rymarkiewicz 提交于
Keep the link key type together with connection and use it to map security level to link key requirements. Authenticate and/or encrypt connection if the link is insufficiently secure. Signed-off-by: NWaldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Waldemar Rymarkiewicz 提交于
If authentication fails the security level should stay as it was set before the process has started. Setting BT_SECURITY_LOW can hide real security level on a link eg. having BT_SECURITY_MEDIUM on the link, re-authenticate with failure to get BT_SECURITY_HIGH, as a result we get BT_SECURITY_LOW on the link while the real security is still medium. Signed-off-by: NWaldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Waldemar Rymarkiewicz 提交于
Introduce the link key types defs and use them instead of magic numbers. Signed-off-by: NWaldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 28 4月, 2011 12 次提交
-
-
由 Johan Hedberg 提交于
This patch adds a new event to the Management interface to track when local adapters are discovering remote devices. For now this only tracks BR/EDR discovery procedures. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NAnderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch adds start_discovery and stop_discovery commands to the management interface. Right now their implementation is fairly simplistic and the parameters are fixed to what user space has defaulted to so far. This is the very initial phase for discovery implementation into the kernel. Next steps include name resolution, LE scanning and bdaddr type handling. Signed-off-by: NJohan Hedberg <johan.hedberg@nokia.com> Signed-off-by: NAnderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
l2cap_sk_ops can be static, it's not used outside l2cap_sock.c Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
A new l2cap_chan_free() is added to free the channels. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
There is no need to the socket deal directly with the channel, most of the time it cares about the channel only. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
In this commit, psm, scid and dcid. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
In this commit, omtu, imtu, flush_to, mode and sport. It also remove the pi var from l2cap_sock_sendmsg(). Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
In this commit all ERTM and Streaming Mode specific vars. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
In this commit sec_level, force_reliable, role_switch and flushable. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
l2cap_chan_connect() is a much better name and reflects what this functions is doing (or will do once socket dependence is removed from the core). Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
First move of elements depending on user data. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
If the allocation happens at l2cap_sock_create() will be able to use the struct l2cap_chan to store channel info that comes from the user via setsockopt. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 21 4月, 2011 5 次提交
-
-
由 Gustavo F. Padovan 提交于
Conflicts: net/bluetooth/l2cap_core.c net/bluetooth/l2cap_sock.c net/bluetooth/mgmt.c
-
由 Stanislaw Gruszka 提交于
Since commit a120e912 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Fri Feb 19 15:47:33 2010 -0800 iwlwifi: sanity check before counting number of tfds can be free we use skb->data after calling ieee80211_tx_status_irqsafe(), which could free skb instantly. On current kernels I do not observe practical problems related with bug, but on 2.6.35.y it cause random system hangs when stressing wireless link, making bisection of other problems impossible. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Since commit a120e912 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Fri Feb 19 15:47:33 2010 -0800 iwlwifi: sanity check before counting number of tfds can be free we use skb->data after calling ieee80211_tx_status_irqsafe(), which could free skb instantly. On current kernels I do not observe practical problems related with bug, but on 2.6.35.y it cause random system hangs when stressing wireless link. Cc: stable@kernel.org # 2.6.32+ Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The locking with SMPS requests means that the debugs file should lock the mgd mutex, not the iflist mutex. Calls to __ieee80211_request_smps() need to hold that mutex, so add an assertion. This has always been wrong, but for some reason never been noticed, probably because the locking error only happens while unassociated. Cc: stable@kernel.org [2.6.34+] Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 4月, 2011 1 次提交
-
-
由 Felix Fietkau 提交于
The patch 'ath9k_hw: fix stopping rx DMA during resets' added code to detect a condition where rx DMA was stopped, but the MAC failed to enter the idle state. This condition requires a hardware reset, however the return value of ath_stoprecv was 'true' in that case, which allowed it to skip the reset when issuing a fast channel change. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Reported-by: NPaul Stewart <pstew@google.com> Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 19 4月, 2011 4 次提交
-
-
由 Ruiyi Zhang 提交于
When retrasmitting one frame, only SAR bits in control field should be kept. Signed-off-by: NRuiyi Zhang <Ruiyi.zhang@atheros.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Luiz Augusto von Dentz 提交于
shutdown should wait for SCO link to be properly disconnected before detroying the socket, otherwise an application using the socket may assume link is properly disconnected before it really happens which can be a problem when e.g synchronizing profile switch. Signed-off-by: NLuiz Augusto von Dentz <luiz.dentz-von@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Vinicius Costa Gomes 提交于
In the teardown path the reset command is sent to the controller, this event causes the command timer to be reactivated. So the timer is removed in two situations, when the adapter isn't marked as UP and when we know that some command has been sent. Reported-by: NKeith Packard <keithp@keithp.com> Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Ville Tervo 提交于
hci_io_capa_reply_evt() holds reference for hciconnection. It's useless since hci_io_capa_request_evt()/hci_simple_pair_complete_evt() already protects the connection. In addition it leaves connection open after failed SSP pairing. Signed-off-by: NVille Tervo <ville.tervo@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 18 4月, 2011 1 次提交
-
-
由 Daniel Halperin 提交于
For some reason, sending QoS configuration causes transmission to stop after a single frame on HT channels when not associated. Removing the extra QoS configuration has no effect on station mode, and fixes injection mode. Signed-off-by: NDaniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 15 4月, 2011 2 次提交
-
-
由 Gustavo F. Padovan 提交于
Fix a regression from the L2CAP "rewrite" patches. Purge the tx_q already happens on l2cap_chan_del() so we don't need it at l2cap_disconnect_req(). Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
l2cap_get_sock_by_scid was changed to not lock the socket anymore, but I forgot to change all the users of this function. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 14 4月, 2011 2 次提交
-
-
由 Gustavo F. Padovan 提交于
Fix an locking issue with the new l2cap_att_channel(). l2cap_att_channel() was trying to lock a locked socket. Reported-by: NAnderson Lizardo <anderson.lizardo@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Stanislaw Gruszka 提交于
priv->tx_power_next is not initialized to max supported power, but instead default value is used, what cause errors like [ 58.597834] iwl3945 0000:03:00.0: Requested user TXPOWER 15 above upper limit 14. [ 58.597839] iwl3945 0000:03:00.0: Error setting Tx power (-22). if maximum tx power read from the eeprom is smaller than default. In consequence card is unable to initialize properly. Fix the problem and cleanup tx power initialization. Reported-and-tested-by: NRobin Dong <hao.bigrat@gmail.com> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 13 4月, 2011 6 次提交
-
-
由 Kevin Gan 提交于
The SD8787 firmware image is shared with mwifiex driver. Whoever gets loaded first will be responsible for firmware downloading. Signed-off-by: NKevin Gan <ganhy@marvell.com> Signed-off-by: NTristan Xu <xurf@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
It may return error and in this case we do add to the stats. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Jiejing Zhang 提交于
Check the return value of hu->proto->recv() in hci_uart_tty_receive() the recv() may return error, check it, not add this to statistics. Signed-off-by: NJiejing Zhang <jiejing.zhang@freescale.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Szymon Janc 提交于
Use kernel stored remote Out Of Band data only if management interface is enabled. Otherwise HCI_OP_REMOTE_OOB_DATA_NEG_REPLY was sent to controller even if remote Out Of Band data was present in bluetoothd. Signed-off-by: NSzymon Janc <szymon.janc@tieto.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Despite it works, handling through l2cap_data_channel() is wrongs. That function should handle only connection oriented data. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-