- 20 6月, 2011 1 次提交
-
-
由 Paul Mundt 提交于
This fixes up build issues for SH7720/SH7722/SH7750 that crept in with the serial rework. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 14 6月, 2011 1 次提交
-
-
由 Paul Mundt 提交于
This takes a bit of a sledgehammer to the horribly CPU subtype ifdef-ridden header and abstracts all of the different register layouts in to distinct types which in turn can be overriden on a per-port basis, or permitted to default to the map matching the port type at probe time. In the process this ultimately fixes up inumerable bugs with mismatches on various CPU types (particularly the legacy ones that were obviously broken years ago and no one noticed) and provides a more tightly coupled and consolidated platform for extending and implementing generic features. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 12 1月, 2011 1 次提交
-
-
由 Arnd Hannemann 提交于
This patch enables the interrupt generation for SDIO IRQs of the sdhi controllers of the SoC. To make sure SDIO IRQs are used, announce the MMC_CAP_SDIO_IRQ capability on migor. Signed-off-by: NArnd Hannemann <arnd@arndnet.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 19 9月, 2010 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
Recent ASoC changes unified all PCM names, fix the platform code to match. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 22 5月, 2010 2 次提交
-
-
由 Guennadi Liakhovetski 提交于
SuperH SDHI controllers can use DMA, add slave definitions to sh7722. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Now that DMA slave IDs are only used used in platform specific code and have become opaque cookies for the rest of the code, we can make the, CPU specific too. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 26 4月, 2010 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
Lists of DMA channels and slaves are not changed, make them constant. Besides, SH7724 channel and slave configuration of both DMA controllers is identical, remove the extra copy of the configuration data. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 29 3月, 2010 1 次提交
-
-
由 Paul Mundt 提交于
Kills off clock string usage, using the new function clock definition instead. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 10 3月, 2010 2 次提交
-
-
由 Paul Mundt 提交于
This fixes up some of the I/D/F clock ambiguity in the sh-sci driver. The interface clock in most cases just wraps back to the peripheral clock, while the function clock wraps in to the MSTP bits. As the logic was somewhat inverted, this cleans that up, and also enables all CPUs with SCI MSTP bits to match function clocks through clkdev lookup. As a result, this gets rid of the clk string abuse on the sh side, and the clock string will be killed off once the ARM code has had a chance to sync up. This also enables MSTP gating on CPUs like 7786 which had never wired it up before. Impacted CPUs are primarily all SH-Mobiles, SH7785, and SH7786. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Now that dev_name() can be used early, we no longer require a static string. Kill off all of the superfluous timer names. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 02 3月, 2010 4 次提交
-
-
由 Guennadi Liakhovetski 提交于
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Separate SH DMA headers into ones, commonly used by both drivers, and ones, specific to each of them. This will make the future development of the dmaengine driver easier. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
The shdma dmaengine driver currently uses numerous macros to support various platforms, selected by ifdef's. Convert it to use platform device resources and lists of channel descriptors to specify register locations, interrupt numbers and other system-specific configuration variants. Unavoidably, we have to simultaneously convert all shdma users to provide those resources. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
This patch is required to use the SIU ASoC driver on sh7722 systems. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 17 2月, 2010 1 次提交
-
-
由 Magnus Damm 提交于
Update the sh7722 INTC tables with force_enable support to mask out pending unsupported SDHI interrupt sources. Without this patch the kernel locks up due to a pending SDHI interrupt that the tmio_mmc driver cannot handle. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 09 2月, 2010 1 次提交
-
-
由 Magnus Damm 提交于
Merge the SDHI vectors in the sh7722 INTC table and update the SDHI platform data for Migo-R. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 15 12月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
This patch breaks out the sh4a scif serial port platform data from a shared platform device to one platform device per port. Also, add serial ports to the list of early platform devices. Only sh4a SuperH Mobile processors are modified by this patch. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 25 9月, 2009 1 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 13 8月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
Convert the processor platform device setup functions from __initcall() and sometimes device_initcall() to arch_initcall(). This makes sure that the platform devices are registered a bit earlier so the devices are available when drivers register using initcall levels earlier than device_initcall(). A good example is platform devices needed by i2c-sh_mobile.c which registers a bit earlier using subsys_initcall(). Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 04 8月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
Add hwblk_id to on-chip sh7722 platform devices. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 23 7月, 2009 2 次提交
-
-
由 Magnus Damm 提交于
Convert the processor platform device setup functions from __initcall() and sometimes device_initcall() to arch_initcall(). This makes sure that the platform devices are registered a bit earlier so the devices are available when drivers register using initcall levels earlier than device_initcall(). A good example is platform devices needed by i2c-sh_mobile.c which registers a bit earlier using subsys_initcall(). Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Convert the m66592-udc driver to use the on_chip flag from platform data to enable on chip behaviour instead of relying on CONFIG_SUPERH_BUILT_IN_M66592 ugliness. This makes the code cleaner and also allows us to support both external and internal m66592 with the same kernel. It also makes the Kconfig part more future proof since we with this patch can add support for new processors with on-chip m66592 without modifying the Kconfig. The patch adds a m66592 header file for platform data and ties in platform data to the existing m66592 devices. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 24 6月, 2009 2 次提交
-
-
由 Paul Mundt 提交于
This permits each port to select its own SCBRR calculation algorithm, rather than having it all ifdef'ed in the header. There are presently only 5 different variations that all parts fall under. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This moves all of the SCSCR_INIT definitions in to the platform data, for future consolidation. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 12 5月, 2009 1 次提交
-
-
由 Paul Mundt 提交于
Kill off all of the clk_always_enabled leftovers and use the new flag directly. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 08 5月, 2009 2 次提交
-
-
由 Paul Mundt 提交于
This adds the clock specifier to all of the SH-Mobile sh-sci ports. Impacted CPUs are SH7343/SH7366/SH7722/SH7723/SH7724. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch enables the TMU clocksource on sh7722. To prioritize TMU over CMT we also adjust the CMT clock source rating. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 03 5月, 2009 2 次提交
-
-
由 Paul Mundt 提交于
All of the SH timers use a roughly identical structure for platform data, which presently is broken out for each block. Consolidate all of these definitions, as there is no reason for them to be broken out in the first place. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch adds TMU platform data for sh7722. Only clockevent mode is enabled for now, clocksource requires this patch: "clocksource: setup mult_orig in clocksource_enable()" Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 19 4月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
Use plat_early_device_setup() to register Early Platform Data for SuperH Mobile processors. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 16 4月, 2009 1 次提交
-
-
由 Paul Mundt 提交于
rtc-sh takes care of this now, so no need to have this always enabled. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 29 1月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
CMT platform data for SuperH Mobile sh7723/sh7722/sh7343/sh7366. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 21 1月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
This patch exports the sh7343 JPU to user space using uio_pdrv_genirq, very similar to the sh7722 JPU patch by Hayama-san. While at it fix up the end of the sh7722 JPU iomem resource. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 22 12月, 2008 4 次提交
-
-
由 Takanari Hayama 提交于
Add JPU support on Migo-R via UIO. This make use of Magnus's generic UIO platform driver. Chunk of contiguous memory to hold intermediate image and compressed data during encode and decode. Signed-off-by: NTakanari Hayama <taki@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Remove the old sh_mobile mstpcr clocks. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Add clock framework support to the usbf/m66592 driver and adjust the cpu specific code accordingly. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Add clock framework support to the sh_mobile i2c driver and adjust the processor specific code accordingly. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 28 10月, 2008 1 次提交
-
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 28 7月, 2008 2 次提交
-
-
由 Magnus Damm 提交于
Use clk_always_enable() on the sh7722 processor and in the board code for Migo-R and Solution Engine 7722. Remove duplicate MSTPCR register definitions. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch adds physically contiguous memory chunks to the UIO devices. The same strategy can be used in the future for the CEU as well. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-