- 01 4月, 2010 24 次提交
-
-
由 Michal Simek 提交于
Any sync branch must follow mts instructions not mfs. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Disable debug option in asm code. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
When the system has no lmb bram, main memory should be start from zero because of microblaze vectors. DTS fragment could look like: DDR2_SDRAM: memory@0 { device_type = "memory"; reg = < 0x0 0x10000000 >; } ; Then you have to setup CONFIG_KERNEL_BASE_ADDR=0 which caused that kernel physical start address will be zero. On reset vector place will be jump to 0x100 and on 0x100 starts kernel text. You have to solve how to load the kernel before cpu starts. Tested with XMD. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Last sync. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Move to generic location. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
noMMU and MMU use them. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Here is small regression on dhrystone tests and I think that on all benchmarking tests. It is due to better checking mechanism in put_user macro Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Use unified version. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Previous patches fixed only MMU version and this is the first patch for noMMU kernel Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Generic implementation for noMMU and MMU version Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
copy_from_user macro also use copy_tofrom_user function Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
noMMU and MMU kernel will use copy copy_tofrom_user asm implementation. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Add macro description and resort. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Use FIXUP macros and resort them. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
It is used __FIXUP_SECTION and __EX_TABLE_SECTION macros. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
This is the first patch which does uaccess unification. I choosed to do several patches to be able to use bisect in future if any fault happens. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
The same noMMU and MMU functions should be placed in one file. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Just sort to be able remove whole block. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
I would like to use asm-generic uaccess.h where are segment macros defined. This is just first step. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
We don't need to do it. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Arun Bhanu 提交于
If CONFIG_INITRAMFS_SOURCE is set, "scripts/gen_initramfs_list.sh" checks if the cpio image exists. Remove the duplicate check from the Makefile. Remove the "clean-kernel" variable which is unused in the Makefile and is not used by the Kbuild. Signed-off-by: NArun Bhanu <arun@bhanu.net> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Arun Bhanu 提交于
'make clean' does not to delete the following build generated file: arch/microblaze/boot/linux.bin.ub 'make mrproper' does not to delete the following build generated files: arch/microblaze/boot/simpleImage.* Fix the Makefile to delete these build generated files. See [1] for a discussion on why simpleImage.* files are deleted with 'make mrproper' and not with 'make clean'. [1] http://lkml.org/lkml/2010/3/12/96Signed-off-by: NArun Bhanu <arun@bhanu.net> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Arun Bhanu 提交于
'make ARCH=microblaze help' fails with the following error due to a missing single quote. /bin/sh: -c: line 0: unexpected EOF while looking for matching `'' /bin/sh: -c: line 1: syntax error: unexpected end of file make: *** [help] Error 2 Signed-off-by: NArun Bhanu <arun@bhanu.net> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Steven J. Magnani 提交于
The "kstack=" command line parameter is not parsed correctly. All proper values are interpreted as zero. Signed-off-by: NSteven J. Magnani <steve@digidescorp.com> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 31 3月, 2010 2 次提交
-
-
由 Linus Torvalds 提交于
-
由 David Howells 提交于
Add a MAINTAINERS record for the key management facility. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 3月, 2010 14 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: CRED: Fix memory leak in error handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs: [LogFS] Erase new journal segments [LogFS] Move reserved segments with journal [LogFS] Clear PagePrivate when moving journal Simplify and fix pad_wbuf Prevent data corruption in logfs_rewrite_block() Use deactivate_locked_super Fix logfs_get_sb_final error path Write out both superblocks on mismatch Prevent schedule while atomic in __logfs_readdir Plug memory leak in writeseg_end_io Limit max_pages for insane devices Open segment file before using it
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Do not free zero sized per cpu areas x86: Make sure free_init_pages() frees pages on page boundary x86: Make smp_locks end with page alignment
-
由 Mathieu Desnoyers 提交于
Fix a memory leak on an OOM condition in prepare_usermodehelper_creds(). Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2: Fix a race in o2dlm lockres mastery Ocfs2: Handle deletion of reflinked oprhan inodes correctly. Ocfs2: Journaling i_flags and i_orphaned_slot when adding inode to orphan dir. ocfs2: Clear undo bits when local alloc is freed ocfs2: Init meta_ac properly in ocfs2_create_empty_xattr_block. ocfs2: Fix the update of name_offset when removing xattrs ocfs2: Always try for maximum bits with new local alloc windows ocfs2: set i_mode on disk during acl operations ocfs2: Update i_blocks in reflink operations. ocfs2: Change bg_chain check for ocfs2_validate_gd_parent. [PATCH] Skip check for mandatory locks when unlocking
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (28 commits) ceph: update discussion list address in MAINTAINERS ceph: some documentations fixes ceph: fix use after free on mds __unregister_request ceph: avoid loaded term 'OSD' in documention ceph: fix possible double-free of mds request reference ceph: fix session check on mds reply ceph: handle kmalloc() failure ceph: propagate mds session allocation failures to caller ceph: make write_begin wait propagate ERESTARTSYS ceph: fix snap rebuild condition ceph: avoid reopening osd connections when address hasn't changed ceph: rename r_sent_stamp r_stamp ceph: fix connection fault con_work reentrancy problem ceph: prevent dup stale messages to console for restarting mds ceph: fix pg pool decoding from incremental osdmap update ceph: fix mds sync() race with completing requests ceph: only release unused caps with mds requests ceph: clean up handle_cap_grant, handle_caps wrt session mutex ceph: fix session locking in handle_caps, ceph_check_caps ceph: drop unnecessary WARN_ON in caps migration ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (asc7621) Add X58 entry in Kconfig hwmon: (w83793) Saving negative errors in unsigned hwmon: (coretemp) Add missing newline to dev_warn() message hwmon: (coretemp) Fix cpu model output
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_via: fix VT6410/6415/6330 detection issue
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits) r8169: offical fix for CVE-2009-4537 (overlength frame DMAs) ipv6: Don't drop cache route entry unless timer actually expired. tulip: Add missing parens. r8169: fix broken register writes pcnet_cs: add new id bonding: fix broken multicast with round-robin mode drivers/net: Fix continuation lines e1000: do not modify tx_queue_len on link speed change net: ipmr/ip6mr: prevent out-of-bounds vif_table access ixgbe: Do not run all Diagnostic offline tests when VFs are active igb: use correct bits to identify if managability is enabled benet: Fix compile warnnings in drivers/net/benet/be_ethtool.c net: Add MSG_WAITFORONE flag to recvmmsg e1000e: do not modify tx_queue_len on link speed change igbvf: do not modify tx_queue_len on link speed change ipv4: Restart rt_intern_hash after emergency rebuild (v2) ipv4: Cleanup struct net dereference in rt_intern_hash net: fix netlink address dumping in IPv4/IPv6 tulip: Fix null dereference in uli526x_rx_packet() gianfar: fix undo of reserve() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Properly truncate pt_regs framepointer in perf callback. arch/sparc/kernel: Use set_cpus_allowed_ptr sparc: Fix use of uid16_t and gid16_t in asm/stat.h
-
由 Linus Torvalds 提交于
In commit 9df93939 ("ext3: Use bitops to read/modify EXT3_I(inode)->i_state") ext3 changed its internal 'i_state' variable to use bitops for its state handling. However, unline the same ext4 change, it didn't actually change the name of the field when it changed the semantics of it. As a result, an old use of 'i_state' remained in fs/ext3/ialloc.c that initialized the field to EXT3_STATE_NEW. And that does not work _at_all_ when we're now working with individually named bits rather than values that get masked. So the code tried to mark the state to be new, but in actual fact set the field to EXT3_STATE_JDATA. Which makes no sense at all, and screws up all the code that checks whether the inode was newly allocated. In particular, it made the xattr code unhappy, and caused various random behavior, like apparently https://bugzilla.redhat.com/show_bug.cgi?id=577911 So fix the initialization, and rename the field to match ext4 so that we don't have this happen again. Cc: James Morris <jmorris@namei.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Daniel J Walsh <dwalsh@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Neil Horman 提交于
Official patch to fix the r8169 frame length check error. Based on this initial thread: http://marc.info/?l=linux-netdev&m=126202972828626&w=1 This is the official patch to fix the frame length problems in the r8169 driver. As noted in the previous thread, while this patch incurs a performance hit on the driver, its possible to improve performance dynamically by updating the mtu and rx_copybreak values at runtime to return performance to what it was for those NICS which are unaffected by the ideosyncracy (if there are any). Summary: A while back Eric submitted a patch for r8169 in which the proper allocated frame size was written to RXMaxSize to prevent the NIC from dmaing too much data. This was done in commit fdd7b4c3. A long time prior to that however, Francois posted 126fa4b9, which expiclitly disabled the MaxSize setting due to the fact that the hardware behaved in odd ways when overlong frames were received on NIC's supported by this driver. This was mentioned in a security conference recently: http://events.ccc.de/congress/2009/Fahrplan//events/3596.en.html It seems that if we can't enable frame size filtering, then, as Eric correctly noticed, we can find ourselves DMA-ing too much data to a buffer, causing corruption. As a result is seems that we are forced to allocate a frame which is ready to handle a maximally sized receive. This obviously has performance issues with it, so to mitigate that issue, this patch does two things: 1) Raises the copybreak value to the frame allocation size, which should force appropriately sized packets to get allocated on rx, rather than a full new 16k buffer. 2) This patch only disables frame filtering initially (i.e., during the NIC open), changing the MTU results in ring buffer allocation of a size in relation to the new mtu (along with a warning indicating that this is dangerous). Because of item (2), individuals who can't cope with the performance hit (or can otherwise filter frames to prevent the bug), or who have hardware they are sure is unaffected by this issue, can manually lower the copybreak and reset the mtu such that performance is restored easily. Signed-off-by: NNeil Horman <nhorman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
For 32-bit processes, we save the full 64-bits of the regs in pt_regs. But unlike when the userspace actually does load and store instructions, the top 32-bits don't get automatically truncated by the cpu in kernel mode (because the kernel doesn't execute with PSTATE_AM address masking enabled). So we have to do it by hand. Reported-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jaswinder Singh Rajput 提交于
Intel X58 have asc7621a chip. So added X58 entry in Kconfig for asc7621. Also arranged existing models in ascending order. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-