An alias entry in the ACPI table means that the device can send requests to the
IOMMU with both device ids, its own and the alias. This is not handled properly
in the ACPI init code. This patch fixes the issue.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Now that enable_iommus() will call iommu_disable() for each iommu,
the call to disable_iommus() during resume is redundant.  Also, the order
for an invalidation is to invalidate device table entries first, then
domain translations.
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

These registers may contain values from previous kernels. So reset them
to known values before enable the event buffer again.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The IOMMU spec states that IOMMU behavior may be undefined when the
IOMMU registers are rewritten while command or event buffer is enabled.
Disable them in IOMMU disable path.
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

When the IOMMU stays enabled the BIOS may not be able to finish the
machine shutdown properly. So disable the hardware on shutdown.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This parameter is not longer necessary when aperture increases
dynamically.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This patch puts everything together and enables suspend/resume support
in the AMD IOMMU driver.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This patch makes sure that no function required for suspend/resume of
AMD IOMMU driver is thrown away after boot.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This function is required for suspend/resume support with AMD IOMMU
enabled.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Current hardware uses msi instead of msi-x so this code it not necessary
and can not be tested. The best thing is to drop this code.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

It is not necessary to loop again over all IOMMUs in this code. So drop
the loop.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This patch restructures the AMD IOMMU initialization code to initialize
all hardware registers with one single function call.
This is helpful for suspend/resume support.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This patch introduces the for_each_iommu and for_each_iommu_safe macros
to simplify the developers life when having to iterate over all AMD
IOMMUs in the system.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The bug never triggered. But it should be fixed to protect against
broken ACPI tables in the future.

[ Impact: protect against broken ivrs acpi table ]
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The devid parameter to set_dev_entry_from_acpi is the requester ID
rather than the device ID since it is used to index the IOMMU device
table.  The handling of IVHD_DEV_ALIAS used to pass the device ID.
This patch fixes it to pass the requester ID.

[ Impact: fix setting the wrong req-id in acpi-table parsing ]
Signed-off-by: NNeil Turton <nturton@solarflare.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The variable amd_iommu_last_bdf holds the maximum bdf of any device
controlled by an IOMMU, so the number of device entries needed is
amd_iommu_last_bdf+1.  The function tbl_size used amd_iommu_last_bdf
instead.  This would be a problem if the last device were a large
enough power of 2.

[ Impact: fix amd_iommu_last_bdf off-by-one error ]
Signed-off-by: NNeil Turton <nturton@solarflare.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

With device isolation disabled we can test better for race conditions in
dma_ops related code.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Add information about device memory mapping requirements for the IOMMU
as described in the IVRS ACPI table to the kernel log if amd_iommu_dump
was specified on the kernel command line.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Add information about devices belonging to an IOMMU as described in the
IVRS ACPI table to the kernel log if amd_iommu_dump was specified on the
kernel command line.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Add information about IOMMU devices described in the IVRS ACPI table to
the kernel log if amd_iommu_dump was specified on the kernel command
line.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This kernel parameter will be useful to get some AMD IOMMU related
information in dmesg that is not necessary for the default user but may
be helpful in debug situations.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The feature bits should be set via bitmasks, not via feature IDs.

[ Impact: fix feature enabling in newer IOMMU versions ]
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
LKML-Reference: <20090504102028.GA30307@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Impact: cleanup
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Impact: cleanup, reduce kernel size a bit, avoid sparse warning

Fixes sparse warning:
arch/x86/kernel/amd_iommu_init.c:246:13: warning: symbol 'iommu_enable' was not declared. Should it be static?
arch/x86/kernel/amd_iommu_init.c:259:13: warning: symbol 'iommu_enable_event_logging' was not declared. Should it be static?
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: set cmd buffer head and tail pointers to zero in case nobody else did
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Impact: fix bug which can lead to panic in prealloc_protection_domains()
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Impact: cleanup
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix comparison length for 'fullflush'
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Impact: makes device isolation the default for AMD IOMMU

Some device drivers showed double-free bugs of DMA memory while testing
them with AMD IOMMU. If all devices share the same protection domain
this can lead to data corruption and data loss. Prevent this by putting
each device into its own protection domain per default.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Impact: add a new AMD IOMMU kernel command line parameter
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

We are on 64-bit so better use u64 instead of u32 to deal with
addresses:

static void __init iommu_set_device_table(struct amd_iommu *iommu)
{
        u64 entry;
  ...
        entry = virt_to_phys(amd_iommu_dev_table);
  ...

(I am wondering why gcc 4.2.x did not warn about the assignment
between u32 and unsigned long.)

Cc: iommu@lists.linux-foundation.org
Cc: stable@kernel.org
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

propagate an error in enabling the PCI device.

Also eliminates this warning:

 arch/x86/kernel/amd_iommu_init.c: In function ‘init_iommu_one’:
 arch/x86/kernel/amd_iommu_init.c:726: warning: ignoring return value of ‘pci_enable_device’, declared with attribute warn_unused_result
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch against tip/x86/iommu virtually reverts
2842e5bf. But just reverting the
commit breaks AMD IOMMU so this patch also includes some fixes.

The above commit adds new two options to x86 IOMMU generic kernel boot
options, fullflush and nofullflush. But such change that affects all
the IOMMUs needs more discussion (all IOMMU parties need the chance to
discuss it):

http://lkml.org/lkml/2008/9/19/106Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The command buffer release function uses the CMD_BUF_SIZE macro for
get_order. Replace this with iommu->cmd_buf_size which is more reliable
about the actual size of the buffer.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The current calculation of the IVHD entry size is hard to read. So move
this code to a seperate function to make it more clear what this
calculation does.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The ctrl variable is only u32 and readl also returns a 32 bit value. So
the cast to u64 is pointless. Remove it with this patch.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The amd_iommu_pd_alloc_bitmap is allocated with a calculated order and
freed with order 1. This is not a bug since the calculated order always
evaluates to 1, but its unclean code. So replace the 1 with the
calculation in the release path.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

There is a bit in the device entry to suppress all IO page faults
generated by a device. This bit was set until now because there was no
event logging. Now that there is event logging this patch allows IO page
faults from devices to see them in the kernel log.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The code to log IOMMU events is in place now. So enable event logging
with this patch.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>