Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 13 10月, 2009 1 次提交
    • I
      perf_events, x86: Fix event constraints code · 7a693d3f
      由 Ingo Molnar 提交于 
      There was namespace overlap due to a rename i did - this caused
the following build warning, reported by Stephen Rothwell against
linux-next x86_64 allmodconfig:

  arch/x86/kernel/cpu/perf_event.c: In function 'intel_get_event_idx':
  arch/x86/kernel/cpu/perf_event.c:1445: warning: 'event_constraint' is used uninitialized in this function

This is a real bug not just a warning: fix it by renaming the
global event-constraints table pointer to 'event_constraints'.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091013144223.369d616d.sfr@canb.auug.org.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      7a693d3f
  3. 12 10月, 2009 2 次提交
    • M
      perf sched: Add -C option to measure on a specific CPU · 55ffb7a6
      由 Mike Galbraith 提交于 
      To refresh, trying to sched record only one CPU results in bogus
latencies as below.

I fixed^Wmade it stop doing the bad thing today, by
following task migration events properly.

Before:

  marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10
  marge:/root/tmp # perf sched lat
   -----------------------------------------------------------------------------------------
    Task                  |   Runtime ms  | Switches | Average delay ms | Maximum delay ms |
   -----------------------------------------------------------------------------------------
    Xorg:4943             |      1.290 ms |        1 | avg: 1670.132 ms | max: 1670.132 ms |
    hald-addon-stor:3569  |      0.091 ms |        3 | avg:  658.609 ms | max: 1975.797 ms |
    hald-addon-stor:3573  |      0.209 ms |        4 | avg:  499.138 ms | max: 1990.565 ms |
    audispd:4270          |      0.012 ms |        1 | avg:    0.015 ms | max:    0.015 ms |
  ....

  marge:/root/tmp # perf sched trace|grep 'Xorg:4943'
           swapper-0     [000]   401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns]
   rt2870TimerQHan-4947  [000]   402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns]
   rt2870TimerQHan-4947  [000]   402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1  to: 0
   rt2870TimerQHan-4947  [000]   402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns]
   rt2870TimerQHan-4947  [000]   402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140]
              Xorg-4943  [000]   402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns]
              Xorg-4943  [000]   402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140]

After:

  marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10
  marge:/root/tmp # perf sched lat
   -----------------------------------------------------------------------------------------
    Task                  |   Runtime ms  | Switches | Average delay ms | Maximum delay ms |
   -----------------------------------------------------------------------------------------
    amarokapp:11150       |    271.297 ms |      878 | avg:    0.130 ms | max:    1.057 ms |
    konsole:5965          |      1.370 ms |       12 | avg:    0.092 ms | max:    0.855 ms |
    Xorg:4943             |    179.980 ms |     1109 | avg:    0.087 ms | max:    1.206 ms |
    hald-addon-stor:3574  |      0.212 ms |        9 | avg:    0.040 ms | max:    0.169 ms |
    hald-addon-stor:3570  |      0.223 ms |        9 | avg:    0.037 ms | max:    0.223 ms |
    klauncher:5864        |      0.550 ms |        8 | avg:    0.032 ms | max:    0.048 ms |

The 'Maximum delay ms' results are now sane.
Signed-off-by: NMike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      55ffb7a6
    • M
      perf tools: Fix counter sample frequency breakage · 7e4ff9e3
      由 Mike Galbraith 提交于 
      Commit 42e59d7d switched to a default sample frequency of
1KHz, which overrides any user supplied count, causing sched, top
and timechart to miss events due to their discrete events
being flagged PERF_SAMPLE_PERIOD.

Override default sample frequency when the user profides a
period count, and make both record and top honor that user
supplied option.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <1255326963.15107.2.camel@marge.simson.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      7e4ff9e3
  5. 09 10月, 2009 7 次提交
    • P
      perf, x86: Add simple group validation · fe9081cc
      由 Peter Zijlstra 提交于 
      Refuse to add events when the group wouldn't fit onto the PMU
anymore.

Naive implementation.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@gmail.com>
LKML-Reference: <1254911461.26976.239.camel@twins>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      fe9081cc
    • S
      perf_events: Add event constraints support for Intel processors · b690081d
      由 Stephane Eranian 提交于 
      On some Intel processors, not all events can be measured in all
counters. Some events can only be measured in one particular
counter, for instance. Assigning an event to the wrong counter does
not crash the machine but this yields bogus counts, i.e., silent
error.

This patch changes the event to counter assignment logic to take
into account event constraints for Intel P6, Core and Nehalem
processors. There is no contraints on Intel Atom. There are
constraints on Intel Yonah (Core Duo) but they are not provided in
this patch given that this processor is not yet supported by
perf_events.

As a result of the constraints, it is possible for some event
groups to never actually be loaded onto the PMU if they contain two
events which can only be measured on a single counter. That
situation can be detected with the scaling information extracted
with read().
Signed-off-by: NStephane Eranian <eranian@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1254840129-6198-3-git-send-email-eranian@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b690081d
    • S
      perf_events: Check for filters on fixed counter events · 04a705df
      由 Stephane Eranian 提交于 
      Intel fixed counters do not support all the filters possible with a
generic counter. Thus, if a fixed counter event is passed but with
certain filters set, then the fixed_mode_idx() function must fail
and the event must be measured in a generic counter instead.

Reject filters are: inv, edge, cnt-mask.
Signed-off-by: NStephane Eranian <eranian@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1254840129-6198-2-git-send-email-eranian@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      04a705df
    • F
      perf tools: Provide backward compatibility with previous perf.data version · 26dd2cb0
      由 Frederic Weisbecker 提交于 
      We have merged the trace.info file into perf.data by adding one
section in the perf headers. This makes it incompatible with
previous version: the new perf tools can't read the older
perf.data.

To support the previous format, we check the headers size. If they
have the same size than in the previous format, then ignore the
trace info section that doesn't exist.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1255032449-12022-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      26dd2cb0
    • F
      perf tools: Fix thread comm resolution in perf sched · 97ea1a7f
      由 Frederic Weisbecker 提交于 
      This reverts commit 9a92b479 ("perf
tools: Improve thread comm resolution in perf sched") and fixes the
real bug.

The bug was elsewhere:

We are failing to resolve thread names in perf sched because the
table of threads we are building, on top of comm events, has a per
process granularity. But perf sched, unlike the other perf tools,
needs a per thread granularity as we are profiling every tasks
individually.

So fix it by building our threads table using the tid instead of
the pid as the thread identifier.

v2: Revert the previous fix - it is not really needed
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1255028657-11158-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      97ea1a7f
    • A
      perf tools: Improve kernel/modules symbol lookup · 2e538c4a
      由 Arnaldo Carvalho de Melo 提交于 
      This removes the ovelapping of vmlinux addresses with modules,
using the ELF section name when using --vmlinux and creating a
unique DSO name when using /proc/kallsyms ([kernel].N).

This is done by creating multiple 'struct map' instances for
address ranges backed by DSOs that have just the symbols for that
range and a name that is derived from the ELF section name.o

Now it is possible to ask for just the symbols in some particular
kernel section:

$ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \
	--dsos [kernel].vsyscall_fn | head -15
    52.73%             Xorg  [.] vread_hpet
    18.61%          firefox  [.] vread_hpet
    14.50%     npviewer.bin  [.] vread_hpet
     6.83%           compiz  [.] vread_hpet
     5.73%         glxgears  [.] vread_hpet
     0.63%             java  [.] vread_hpet
     0.30%   gnome-terminal  [.] vread_hpet
     0.23%             perf  [.] vread_hpet
     0.18%            xchat  [.] vread_hpet
$

Now we don't have to first lookup the list of modules and then, if
it fails, vmlinux symbols, its just a simple lookup for the map
then the symbols, just like for threads.

Reports generated using /proc/kallsyms and --vmlinux should provide
the same results, modulo the DSO name for sections other than
".text".

But they don't right now because things like:

 ffffffff81011c20-ffffffff81012068 system_call
 ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs
 ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath
 ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call

I.e. overlapping symbols, again some ASM special case that we have
to fixup.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      2e538c4a
    • A
      perf tools: Up the verbose level for some really verbose stuff · da21d1b5
      由 Arnaldo Carvalho de Melo 提交于 
      Like printing every symbol created.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1254923340-4870-1-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      da21d1b5
  7. 08 10月, 2009 2 次提交
    • F
      perf tools: Improve thread comm resolution in perf sched · 9a92b479
      由 Frederic Weisbecker 提交于 
      When we get sched traces that involve a task that was already
created before opening the event, we won't have the comm event for
it.

So if we can't find the comm event for a given thread, we look at
the traces that may contain these informations.

Before:

 ata/1:371             |      0.000 ms |        1 | avg: 3988.693 ms | max: 3988.693 ms |
 kondemand/1:421       |      0.096 ms |        3 | avg:  345.346 ms | max: 1035.989 ms |
 kondemand/0:420       |      0.025 ms |        3 | avg:  421.332 ms | max:  964.014 ms |
 :5124:5124            |      0.103 ms |        5 | avg:   74.082 ms | max:  277.194 ms |
 :6244:6244            |      0.691 ms |        9 | avg:  125.655 ms | max:  271.306 ms |
 firefox:5080          |      0.924 ms |        5 | avg:   53.833 ms | max:  257.828 ms |
 npviewer.bin:6225     |     21.871 ms |       53 | avg:   22.462 ms | max:  220.835 ms |
 :6245:6245            |      9.631 ms |       21 | avg:   41.864 ms | max:  213.349 ms |

After:

 ata/1:371             |      0.000 ms |        1 | avg: 3988.693 ms | max: 3988.693 ms |
 kondemand/1:421       |      0.096 ms |        3 | avg:  345.346 ms | max: 1035.989 ms |
 kondemand/0:420       |      0.025 ms |        3 | avg:  421.332 ms | max:  964.014 ms |
 firefox:5124          |      0.103 ms |        5 | avg:   74.082 ms | max:  277.194 ms |
 npviewer.bin:6244     |      0.691 ms |        9 | avg:  125.655 ms | max:  271.306 ms |
 firefox:5080          |      0.924 ms |        5 | avg:   53.833 ms | max:  257.828 ms |
 npviewer.bin:6225     |     21.871 ms |       53 | avg:   22.462 ms | max:  220.835 ms |
 npviewer.bin:6245     |      9.631 ms |       21 | avg:   41.864 ms | max:  213.349 ms |
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1255012632-7882-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      9a92b479
    • F
      perf tools: Unify perf.data mapping and events handling · 016e92fb
      由 Frederic Weisbecker 提交于 
      This librarizes the perf.data file mapping and handling in various
perf tools, roughly reducing the amount of code and fixing the
places that mmap from beginning of the file whereas we want to mmap
from the beginning of the data, leading to page fault because the
mmap window is too small since the trace info are written in the
file too.

TODO:

 - convert perf timechart too
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20091007104729.GD5043@nowhere>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      016e92fb
  9. 07 10月, 2009 2 次提交
    • F
      perf tools: Merge trace.info content into perf.data · 03456a15
      由 Frederic Weisbecker 提交于 
      This drops the trace.info file and move its contents into the
common perf.data file.

This is done by creating a new trace_info section into this file. A
user of perf headers needs to call perf_header__set_trace_info() to
save the trace meta informations into the perf.data file.

A file created by perf after his patch is unsupported by previous
version because the size of the headers have increased.

That said, it's two new fields that have been added in the end of
the headers, and those could be ignored by previous versions if
they just handled the dynamic header size and then ignore the
unknow part. The offsets guarantee the compatibility. We'll do a
-stable fix for that.

But current previous versions handle the header size using its
static size, not dynamic, then it's not backward compatible with
trace records.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091006213643.GA5343@nowhere>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      03456a15
    • F
      perf tools: Start the perf.data mapping at data offset in perf trace · b209aa1f
      由 Frederic Weisbecker 提交于 
      Currently, we are mapping perf.data in the beginning of the file
and use the data offset as a buffer offset.

This may exceed the mapping area if the data offset is upper than
page_size * mmap_window and result in a page fault (thing that
happen if we merge trace.info in perf.data).

Instead, let's start the mapping in the page that matches our data
offset.

v2: Drop a junk from another patch (trace_report() removal)
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1254856886-10348-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b209aa1f
  11. 06 10月, 2009 15 次提交
  13. 05 10月, 2009 2 次提交
    • C
      perf: Propagate term signal to child · 933da83a
      由 Chris Wilson 提交于 
      If we launch the child on behalf of the user, ensure that it dies
along with ourselves when we are interrupted.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
LKML-Reference: <1254616502-4728-1-git-send-email-chris@chris-wilson.co.uk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      933da83a
    • A
      perf tools: Remove show_mask bitmask · ec218fc4
      由 Arnaldo Carvalho de Melo 提交于 
      As it was not being exposed via any command line and with --dsos/--comms
we can do this and even more, like asking for just kernel + some module:

[root@doppio linux-2.6-tip]# perf report --dsos \[kernel\],\[drm\]
--vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules | head -15
 # Samples: 619669
 #
 # Overhead          Command  Shared Object  Symbol
 # ........  ...............  .............  ......
 #
      7.12%          swapper  [kernel]       [k] read_hpet
      6.86%             init  [kernel]       [k] read_hpet
      6.22%             init  [kernel]       [k] mwait_idle_with_hints
      5.34%          swapper  [kernel]       [k] mwait_idle_with_hints
      3.01%          firefox  [kernel]       [.] vread_hpet
      2.14%             Xorg  [drm]          [k] drm_clflush_pages
      2.09%           pidgin  [kernel]       [.] vread_hpet
      1.58%     npviewer.bin  [kernel]       [.] vread_hpet
      1.37%          swapper  [kernel]       [k] hpet_next_event
      1.23%             Xorg  [kernel]       [k] read_hpet
[root@doppio linux-2.6-tip]#
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091003233048.GA30535@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ec218fc4
  15. 03 10月, 2009 1 次提交
  17. 02 10月, 2009 1 次提交
    • A
      perf tools: Rewrite and improve support for kernel modules · 439d473b
      由 Arnaldo Carvalho de Melo 提交于 
      Representing modules as struct map entries, backed by a DSO, etc,
using /proc/modules to find where the module is loaded.

DSOs now can have a short and long name, so that in verbose mode we
can show exactly which .ko or vmlinux image was used.

As kernel modules now are a DSO separate from the kernel, we can
ask for just the hits for a particular set of kernel modules, just
like we can do with shared libraries:

[root@doppio linux-2.6-tip]# perf report -n --vmlinux
/home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15
    84.58%      13266             Xorg  [k] drm_clflush_pages
     4.02%        630             Xorg  [k] trace_kmalloc.clone.0
     3.95%        619             Xorg  [k] drm_ioctl
     2.07%        324             Xorg  [k] drm_addbufs
     1.68%        263             Xorg  [k] drm_gem_close_ioctl
     0.77%        120             Xorg  [k] drm_setmaster_ioctl
     0.70%        110             Xorg  [k] drm_lastclose
     0.68%        106             Xorg  [k] drm_open
     0.54%         85             Xorg  [k] drm_mm_search_free
[root@doppio linux-2.6-tip]#

Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko
would have the same effect. Allowing specifying just 'drm.ko' is left
for another patch.

Processing kallsyms so that per kernel module struct map are
instantiated was also left for another patch. That will allow
removing the module name from each of its symbols.

struct symbol was reduced by removing the ->module backpointer and
moving it (well now the map) to struct symbol_entry in perf top,
that is its only user right now.

The total linecount went down by ~500 lines.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      439d473b
  19. 01 10月, 2009 5 次提交
  21. 30 9月, 2009 2 次提交