Show multiple annotation result for each evsel.  Each result represents
the most frquently sampled symbol/function for the evsel and it will be
shown in a tab window.

For this add a reference to main container (notebook) to the pgctx.  At
the first call to annotate browser, hist_entry__find_annotations() will
setup a new browser, and next calls will add new tabs to the browser.
But it requires final perf_gtk__show_annotations() to start processing
GUI events.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Basic implementation of perf annotate on GTK2.  Currently only
shows first symbol.  Add a new --gtk option to use it.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When perf annotate runs with no vmlinux file it cannot annotate kernel
symbols because the kallsyms only provides symbol addresses.  So it
recommends to run perf buildid-cache to install proper vmlinux image.

But running perf buildid-cache -av vmlinux as the message gives me a
following error:

  $ perf buildid-cache -av /home/namhyung/build/kernel/vmlinux
  Couldn't add v: No such file or directory

Since the -a option receives a parameter, 'v' should not be after the
option.

In addition -a option is not work for this case since the build-id cache
already has a kallsyms with same build-id so it'll fail with EEXIST.
Use recently added -u (--update) option for it.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-6-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When adding vmlinux file to build-id cache, it'd be fail since kallsyms
dso with a same build-id was already added by perf record.

So one needs to remove the kallsyms first to add vmlinux into the cache.
Add --update option for doing it at once.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360227734-375-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core

Improve uprobes performance by adding 'pre-filtering' support,
by Oleg Nesterov:

	# time perl -e 'syscall -1 for 1..100_000'
	real    0m0.040s
	user    0m0.027s
	sys     0m0.010s

	# perf probe -x /lib/libc.so.6 syscall
	# perf record -e probe_libc:syscall sleep 100 &

Before this series:

	# time perl -e 'syscall -1 for 1..100_000'
	real    0m1.714s
	user    0m0.103s
	sys     0m1.607s

After:

	# time perl -e 'syscall -1 for 1..100_000'
	real    0m0.037s
	user    0m0.013s
	sys     0m0.023s
Signed-off-by: NIngo Molnar <mingo@kernel.org>

uprobe_perf_open/close call the costly uprobe_apply() every time,
we can avoid it if:

	- "nr_systemwide != 0" is not changed.

	- There is another process/thread with the same ->mm.

	- copy_proccess() does inherit_event(). dup_mmap() preserves the
	  inserted breakpoints.

	- event->attr.enable_on_exec == T, we can rely on uprobe_mmap()
	  called by exec/mmap paths.

	- tp_target is exiting. Only _close() checks PF_EXITING, I don't
	  think TRACE_REG_PERF_OPEN can hit the dying task too often.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

Change uprobe_trace_func() and uprobe_perf_func() to return "int". Change
uprobe_dispatcher() to return "trace_ret | perf_ret" although this is not
needed, currently TP_FLAG_TRACE/TP_FLAG_PROFILE are mutually exclusive.

The only functional change is that uprobe_perf_func() checks the filtering
too and returns UPROBE_HANDLER_REMOVE if nobody wants to trace current.

Testing:

	# perf probe -x /lib/libc.so.6 syscall

	# perf record -e probe_libc:syscall -i perl -e 'fork; syscall -1 for 1..10; wait'

	# perf report --show-total-period
		100.00%            10     perl  libc-2.8.so    [.] syscall

Before this patch:

	# cat /sys/kernel/debug/tracing/uprobe_profile
		/lib/libc.so.6 syscall				20

A child process doesn't have a counter, but still it hits this breakoint
"copied" by dup_mmap().

After the patch:

	# cat /sys/kernel/debug/tracing/uprobe_profile
		/lib/libc.so.6 syscall				11

The child process hits this int3 only once and does unapply_uprobe().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

Finally implement uprobe_perf_filter() which checks ->nr_systemwide or
->perf_events to figure out whether we need to insert the breakpoint.

uprobe_perf_open/close are changed to do uprobe_apply(true/false) when
the new perf event comes or goes away.

Note that currently this is very suboptimal:

	- uprobe_register() called by TRACE_REG_PERF_REGISTER becomes a
	  heavy nop, consumer->filter() always returns F at this stage.

	  As it was already discussed we need uprobe_register_only() to
	  avoid the costly register_for_each_vma() when possible.

	- uprobe_apply() is oftenly overkill. Unless "nr_systemwide != 0"
	  changes we need uprobe_apply_mm(), unapply_uprobe() is almost
	  what we need.

	- uprobe_apply() can be simply avoided sometimes, see the next
	  changes.

Testing:

	# perf probe -x /lib/libc.so.6 syscall

	# perl -e 'syscall -1 while 1' &
	[1] 530

	# perf record -e probe_libc:syscall perl -e 'syscall -1 for 1..10; sleep 1'

	# perf report --show-total-period
		100.00%            10     perl  libc-2.8.so    [.] syscall

Before this patch:

	# cat /sys/kernel/debug/tracing/uprobe_profile
		/lib/libc.so.6 syscall				79291

A huge ->nrhit == 79291 reflects the fact that the background process
530 constantly hits this breakpoint too, even if doesn't contribute to
the output.

After the patch:

	# cat /sys/kernel/debug/tracing/uprobe_profile
		/lib/libc.so.6 syscall				10

This shows that only the target process was punished by int3.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

Introduce "struct trace_uprobe_filter" which records the "active"
perf_event's attached to ftrace_event_call. For the start we simply
use list_head, we can optimize this later if needed. For example, we
do not really need to record an event with ->parent != NULL, we can
rely on parent->child_list. And we can certainly do some optimizations
for the case when 2 events have the same ->tp_target or tp_target->mm.

Change trace_uprobe_register() to process TRACE_REG_PERF_OPEN/CLOSE
and add/del this perf_event to the list.

We can probably avoid any locking, but lets start with the "obvioulsy
correct" trace_uprobe_filter->rwlock which protects everything.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

Currently it is not possible to change the filtering constraints after
uprobe_register(), so a consumer can not, say, start to trace a task/mm
which was previously filtered out, or remove the no longer needed bp's.

Introduce uprobe_apply() which simply does register_for_each_vma() again
to consult uprobe_consumer->filter() and install/remove the breakpoints.
The only complication is that register_for_each_vma() can no longer
assume that uprobe->consumers should be consulter if is_register == T,
so we change it to accept "struct uprobe_consumer *new" instead.

Unlike uprobe_register(), uprobe_apply(true) doesn't do "unregister" if
register_for_each_vma() fails, it is up to caller to handle the error.

Note: we probably need to cleanup the current interface, it is strange
that uprobe_apply/unregister need inode/offset. We should either change
uprobe_register() to return "struct uprobe *", or add a private ->uprobe
member in uprobe_consumer. And in the long term uprobe_apply() should
take a single argument, uprobe or consumer, even "bool add" should go
away.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

sys_perf_event_open()->perf_init_event(event) is called before
find_get_context(event), this means that event->ctx == NULL when
class->reg(TRACE_REG_PERF_REGISTER/OPEN) is called and thus it
can't know if this event is per-task or system-wide.

This patch adds hw_perf_event->tp_target for PERF_TYPE_TRACEPOINT,
this is analogous to PERF_TYPE_BREAKPOINT/bp_target we already have.
The patch also moves ->bp_target up so that it can overlap with the
new member, this can help the compiler to generate the better code.

trace_uprobe_register() will use it for prefiltering to avoid the
unnecessary breakpoints in mm's we do not want to trace.

->tp_target doesn't have its own reference, but we can rely on the
fact that either sys_perf_event_open() holds a reference, or it is
equal to event->ctx->task. So this pointer is always valid until
free_event().

Also add the "struct list_head tp_list" into this union. It is not
strictly necessary, but it can simplify the next changes and we can
add it for free.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

Move tu->nhit++ from uprobe_trace_func() to uprobe_dispatcher().

->nhit counts how many time we hit the breakpoint inserted by this
uprobe, we do not want to loose this info if uprobe was enabled by
sys_perf_event_open().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

trace_uprobe->consumer and "struct uprobe_trace_consumer" add the
unnecessary indirection and complicate the code for no reason.

This patch simply embeds uprobe_consumer into "struct trace_uprobe",
all other changes only fix the compilation errors.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

probe_event_enable/disable() check tu->consumer != NULL to avoid the
wrong uprobe_register/unregister().

We are going to kill this pointer and "struct uprobe_trace_consumer",
so we add the new helper, is_trace_uprobe_enabled(), which can rely
on TP_FLAG_TRACE/TP_FLAG_PROFILE instead.

Note: the current logic doesn't look optimal, it is not clear why
TP_FLAG_TRACE/TP_FLAG_PROFILE are mutually exclusive, we will probably
change this later.

Also kill the unused TP_FLAG_UPROBE.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

probe_event_enable/disable() check tu->inode != NULL at the start.
This is ugly, if igrab() can fail create_trace_uprobe() should not
succeed and "postpone" the failure.

And S_ISREG(inode->i_mode) check added by d24d7dbf is not safe.

Note: alloc_uprobe() should probably check igrab() != NULL as well.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

probe_event_enable() does uprobe_register() and only after that sets
utc->tu and tu->consumer/flags. This can race with uprobe_dispatcher()
which can miss these assignments or see them out of order. Nothing
really bad can happen, but this doesn't look clean/safe.

And this does not allow to use uprobe_consumer->filter() we are going
to add, it is called by uprobe_register() and it needs utc->tu.

Change this code to initialize everything before uprobe_register(), and
reset tu->consumer/flags if it fails. We can't race with event_disable(),
the caller holds event_mutex, and if we could the code would be wrong
anyway.

In fact I think uprobe_trace_consumer should die, it buys nothing but
complicates the code. We can simply add uprobe_consumer into trace_uprobe.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

create_trace_uprobe() does kern_path() to find ->d_inode, but forgets
to do path_put(). We can do this right after igrab().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

The original pull message for uprobes (commit 654443e2) noted:

  This tree includes uprobes support in 'perf probe' - but SystemTap
  (and other tools) can take advantage of user probe points as well.

In order to actually be usable in module-based tools like SystemTap, the
interface needs to be exported.  This patch first adds the obvious
exports for uprobe_register and uprobe_unregister.  Then it also adds
one for task_user_regset_view, which is necessary to get the correct
state of userspace registers.
Signed-off-by: NJosh Stone <jistone@redhat.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

utask->xol_vaddr is either zero or valid, remove the bogus
IS_ERR_VALUE() check in xol_free_insn_slot().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NAnton Arapov <anton@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

handle_swbp() does get_utask() before can_skip_sstep() for no reason,
we do not need ->utask if can_skip_sstep() succeeds.

Move get_utask() to pre_ssout() who actually starts to use it. Move
the initialization of utask->active_uprobe/state as well. This way
the whole initialization is consolidated in pre_ssout().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NAnton Arapov <anton@redhat.com>

pre_ssout() should do xol_free_insn_slot() if arch_uprobe_pre_xol()
fails, otherwise nobody will free the allocated slot.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NAnton Arapov <anton@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

pre_ssout()->xol_get_insn_slot() path is confusing and buggy. This patch
cleanups the code, the next one fixes the bug.

Change xol_get_insn_slot() to only allocate the slot and do nothing more,
move the initialization of utask->xol_vaddr/vaddr into pre_ssout().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NAnton Arapov <anton@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Rename add_utask() into get_utask() and change it to allocate on
demand to simplify the caller. Like get_xol_area() it will have
more users.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NAnton Arapov <anton@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Currently only xol_get_insn_slot() does get_xol_area() + xol_alloc_area(),
but this will have more users and we do not want to copy-and-paste this
code. This patch simply moves xol_alloc_area() into get_xol_area() to
simplify the current and future code.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NAnton Arapov <anton@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Move alloc_page() from xol_add_vma() to xol_alloc_area() to cleanup
the code. This separates the memory allocations and consolidates the
-EALREADY cleanups and the error handling.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NAnton Arapov <anton@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Change handle_swbp() to set regs->ip = bp_vaddr in advance, this is
what consumer->handler() needs but uprobe_get_swbp_addr() is not
exported.

This also simplifies the code and makes it more consistent across
the supported architectures. handle_swbp() becomes the only caller
of uprobe_get_swbp_addr().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>

__skip_sstep() doesn't update regs->ip. Currently this is correct
but only "by accident" and it doesn't skip the whole insn. Change
it to advance ->ip by the length of the detected 0x66*0x90 sequence.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Currrently the are 2 problems with pre-filtering:

1. It is not possible to add/remove a task (mm) after uprobe_register()

2. A forked child inherits all breakpoints and uprobe_consumer can not
   control this.

This patch does the first step to improve the filtering. handler_chain()
removes the breakpoints installed by this uprobe from current->mm if all
handlers return UPROBE_HANDLER_REMOVE.

Note that handler_chain() relies on ->register_rwsem to avoid the race
with uprobe_register/unregister which can add/del a consumer, or even
remove and then insert the new uprobe at the same address.

Perhaps we will add uprobe_apply_mm(uprobe, mm, is_register) and teach
copy_mm() to do filter(UPROBE_FILTER_FORK), but I think this change makes
sense anyway.

Note: instead of checking the retcode from uc->handler, we could add
uc->filter(UPROBE_FILTER_BPHIT). But I think this is not optimal to
call 2 hooks in a row. This buys nothing, and if handler/filter do
something nontrivial they will probably do the same work twice.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Finally add uprobe_consumer->filter() and change consumer_filter()
to actually call this method.

Note that ->filter() accepts mm_struct, not task_struct. Because:

	1. We do not have for_each_mm_user(mm, task).

	2. Even if we implement for_each_mm_user(), ->filter() can
	   use it itself.

	3. It is not clear who will actually need this interface to
	   do the "nontrivial" filtering.

Another argument is "enum uprobe_filter_ctx", consumer->filter() can
use it to figure out why/where it was called. For example, perhaps
we can add UPROBE_FILTER_PRE_REGISTER used by build_map_info() to
quickly "nack" the unwanted mm's. In this case consumer should know
that it is called under ->i_mmap_mutex.

See the previous discussion at http://marc.info/?t=135214229700002
Perhaps we should pass more arguments, vma/vaddr?

Note: this patch obviously can't help to filter out the child created
by fork(), this will be addressed later.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

filter_chain() was added into install_breakpoint/remove_breakpoint to
simplify the initial changes but this is sub-optimal.

This patch shifts the callsite to the callers, register_for_each_vma()
and uprobe_mmap(). This way:

- It will be easier to add the new arguments. This is the main reason,
  we can do more optimizations later.

- register_for_each_vma(is_register => true) can be optimized, we only
  need to consult the new consumer. The previous consumers were already
  asked when they called uprobe_register().

This patch also moves the MMF_HAS_UPROBES check from remove_breakpoint(),
this allows to avoid the potentionally costly filter_chain(). Note that
register_for_each_vma(is_register => false) doesn't really need to take
->consumer_rwsem, but I don't think it makes sense to optimize this and
introduce filter_chain_lockless().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

uprobe_register() and uprobe_unregister() are the only users of
mutex_lock(uprobes_hash(inode)), and the only reason why we can't
simply remove it is that we need to ensure that delete_uprobe() is
not possible after alloc_uprobe() and before consumer_add().

IOW, we need to ensure that when we take uprobe->register_rwsem
this uprobe is still valid and we didn't race with _unregister()
which called delete_uprobe() in between.

With this patch uprobe_register() simply checks uprobe_is_active()
and retries if it hits this very unlikely race. uprobes_mutex[] is
no longer needed and can be removed.

There is another reason for this change, prepare_uprobe() should be
folded into alloc_uprobe() and we do not want to hold the extra locks
around read_mapping_page/etc.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NAnton Arapov <anton@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

The lifetime of uprobe->rb_node and uprobe->inode is not refcounted,
delete_uprobe() is called when we detect that uprobe has no consumers,
and it would be deadly wrong to do this twice.

Change delete_uprobe() to WARN() if it was already called. We use
RB_CLEAR_NODE() to mark uprobe "inactive", then RB_EMPTY_NODE() can
be used to detect this case.

RB_EMPTY_NODE() is not used directly, we add the trivial helper for
the next change.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NAnton Arapov <anton@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

uprobe_events counts the number of uprobes in uprobes_tree but
it is used as a boolean. We can use RB_EMPTY_ROOT() instead.

Probably no_uprobe_events() added by this patch can have more
callers, say, mmf_recalc_uprobes().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NAnton Arapov <anton@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Now that ->register_rwsem is safe under ->mmap_sem we can kill
->copy_mutex and abuse down_write(&uprobe->consumer_rwsem).

This makes prepare_uprobe() even more ugly, but we should kill
it anyway.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Simply remove UPROBE_RUN_HANDLER and the corresponding code.

It can only help if uprobe has a single consumer, and in fact
it is no longer needed after handler_chain() was changed to use
->register_rwsem, we simply can not race with uprobe_register().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Now that it safe to use ->consumer_rwsem under ->mmap_sem we can
almost finish the implementation of filter_chain(). It still lacks
the actual uc->filter(...) call but othewrwise it is ready, just
it pretends that ->filter() always returns true.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Introduce uprobe->register_rwsem. It is taken for writing around
__uprobe_register/unregister.

Change handler_chain() to use this sem rather than consumer_rwsem.

The main reason for this change is that we have the nasty problem
with mmap_sem/consumer_rwsem dependency. filter_chain() needs to
protect uprobe->consumers like handler_chain(), but they can not
use the same lock. filter_chain() can be called under ->mmap_sem
(currently this is always true), but we want to allow ->handler()
to play with the probed task's memory, and this needs ->mmap_sem.

Alternatively we could use srcu, but synchronize_srcu() is very
slow and ->register_rwsem allows us to do more. In particular, we
can teach handler_chain() to do remove_breakpoint() if this bp is
"nacked" by all consumers, we know that we can't race with the
new consumer which does uprobe_register().

See also the next patches. uprobes_mutex[] is almost ready to die.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

To support the filtering uprobe_register() should do
register_for_each_vma(true) every time the new consumer comes,
we need to install the previously nacked breakpoints.

Note:
	- uprobes_mutex[] should die, what it actually protects is
	  alloc_uprobe().

	- UPROBE_RUN_HANDLER should die too, obviously it can't work
	  unless uprobe has a single consumer. The consumer should
	  serialize with _register/_unregister itself. Or this flag
	  should live in uprobe_consumer->state.

	- Perhaps we can do some optimizations later. For example, if
	  filter_chain() never returns false uprobe can record this
	  fact and avoid the unnecessary register_for_each_vma().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

uprobe_unregister() removes the breakpoints only if the last consumer
goes away. To support the filtering it should do this every time, we
want to remove the breakpoints which nobody else want to keep.

Note: given that filter_chain() is not actually implemented, this patch
itself doesn't change the behaviour yet, register_for_each_vma(false)
is a heavy "nop" unless there are no more consumers.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Add the new helper filter_chain(). Currently it is only placeholder,
the comment explains what is should do. We will change it later to
consult every consumer to decide whether we need to install the swbp.
Until then it works as if any consumer returns true, this matches the
current behavior.

Change install_breakpoint() to call filter_chain() instead of checking
uprobe->consumers != NULL. We obviously need this, and this equally
closes the race with _unregister().

Change remove_breakpoint() to call this helper too. Currently this is
pointless because remove_breakpoint() is only called when the last
consumer goes away, but we will change this.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>