Moving the pm resume up in the init order to fix
dpm seems to have regressed somes cases with the old
pm code.  Move it back to late resume.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise decoding isn't really useable.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=71448Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DCE5 and newer hardware only has 1 DAC.  Use the correct
offset.  This may fix display problems on certain board
configurations.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

If we are not able to properly initialize one of the gpu
engines for buffer paging, we limit vram to the size of
the cpu visible aperture.  We generally either use the gfx
or dma engine to do this.  Clean up the size limiting code
to only adjust the size based on what ring is selected
for buffer paging rather than making assumptions about which
engine is selected for paging.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

For consistency.  These buffers aren't used when pg is
disabled.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

pci config reset is a low level reset that resets
the entire chip from the bus interface.  It can
be more reliable if soft reset fails.

v2: hide behind module parameter
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fill in asic family specific versions rather than
using the generic version.  This lets us handle asic
specific differences more easily.  In this case, we
disable sw swapping of the rtpr writeback value on
r6xx+ since the hw does it for us.  Fixes bogus
rptr readback on BE systems.

v2: remove missed cpu_to_le32(), add comments
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need more control over the ordering of dpm init with
respect to the rest of the asic.  Specifically, the SMC
has to be initialized before the rlc and cg/pg.  The pm
code currently initializes late in the driver, but we need
it to happen much earlier so move pm handling into the asic
specific callbacks.

This makes dpm more reliable and makes clockgating work
properly on CIK parts and should help on SI parts as well.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to reorder the driver init sequence to better accomodate
dpm which needs to be loaded earlier in the init sequence.  Move
fw init up so that it's available for dpm init.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

I'm not entirely sure this is required and it won't work
with the dpm restructing anyway.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This will allow userspace to correctly program the PA_SC_RASTER_CONFIG
register, so it can be considered a fix.
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Only the render backends of the first shader engine were enabled. The others
were erroneously disabled. Enabling the other render backends improves
performance a lot.

Unigine Sanctuary on Bonaire:
  Before: 15 fps
  After:  90 fps

Judging from the fan noise, the GPU was also underclocked when the other
render backends were disabled, resulting in horrible performance. The fan is
a lot noisy under load now.
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Some boards seem to have garbage in the upper
16 bits of the vram size register.  Check for
this and clamp the size properly.  Fixes
boards reporting bogus amounts of vram.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The DMA ring seems to be stable now.

v2: remove pt_ring_index as well
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The buffers needs to be in little endian format.
Noticed-by: NSylvain BERTRAND <sylware@legeek.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Prevent driver load problems if the smc is missing.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=63011Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NMikko Rapeli <mikko.rapeli@iki.fi>
Cc: stable@vger.kernel.org

Disable CG/PG and stop the rlc before resetting.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

s/CG/PG/ in the GFX powergating flag name.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The internal cp interrupts need to be enabled and
disabled at specific times in order clockgating to
work properly.  This patch changes the handling
of the CP_INT_CNTL register to respect the current
state of the internal CP interrupts when making
changes to the other interrupts in CP_INT_CNTL.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The vram scratch buffer needs to be initialized
before the mc is programmed otherwise we program
0 as the GPU address of the default GPU fault
page.  In most cases we put vram at zero anyway and
reserve a page for the legacy vga buffer so in practice
this shouldn't cause any problems, but better to make
it correct.

Was changed in:
6fab3febReported-by: NFrankR Huang <FrankR.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

We need to allocate line buffer to each display when
setting up the watermarks.  Failure to do so can lead
to a blank screen.  This fixes blank screen problems
on dce6 asics.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=64850

Based on an initial fix from:
Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Also add a new RADEON_INFO query to check that CP DMA packets are
supported on the compute ring.

CP DMA has been supported since the 3.8 kernel, but due to an oversight
we forgot to teach the CS checker that the CP DMA packet was legal for
the compute ring on Southern Islands GPUs.

This patch fixes a bug where the radeon driver will incorrectly reject a legal
CP DMA packet from user space.  I would like to have the patch
backported to stable so that we don't have to require Mesa users to use a
bleeding edge kernel in order to take advantage of this feature which
is already present in the stable kernels (3.8 and newer).

v2:
  - Don't bump kms version, so this patch can be backported to stable
    kernels.

Cc: stable@vger.kernel.org
Signed-off-by: NTom Stellard <thomas.stellard@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable DMA powergating by default.  The DMA engines
will be powergated when not in use.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The format of the clearstate buffer used for pg (powergating)
changed between NI and SI.  This formats it properly for what
the hardware expects on SI.

v2: fix addresses
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Clockgating requires signalling between the CP and the
RLC to work properly.  Resetting the CP block in the
CP resume code messed up the internal coordination
between the blocks.  Removing the reset allows gfx
clockgating to work properly.  However, when gfx clock
gating is enabled, there is a strange interaction with
dpm which causes the chip to stay in the high performance
level all the time, so leave gfx clockgating disabled
for now.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Resturcture clockgating code so that it can be
enabled/disabled from other components such as
dpm.

v2: make function static
v3: add fine grained cg controls
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows us finer grained control over clock and
powergating on SI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Similar to DCE4/5, but supports multiple audio pins
which can be assigned per afmt block.

v2: rework the driver to handle more than one audio
pin.
v3: try different dto reg
v4: properly program dto
v5 (ck): change dto programming order
v6: program speaker allocation block
v7: rebase
v8: rebase on Rafał's changes
v9: integrated Rafał's comments, update to latest
    drm_edid_to_speaker_allocation API
v10: add missing line break in error message
v11: add back audio enabled messages
v12: fix copy paste typo in r600_audio_enable
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NRafał Miłecki <zajec5@gmail.com>

Similar to separating the UVD code, just put the DMA
functions into separate files.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Our different hardware blocks are actually completely
separated, so it doesn't make much sense any more to
structure the code by pure chipset generations.

Start restructuring the code by separating our the UVD block.

v2: updated commit message
v3: rebased and restructurized start/stop functions for kv dpm.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Now that we have callbacks for [rw]ptr handling we can
remove the special handling for the DMA rings and use
the callbacks instead.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The hardware just doesn't support this correctly.
Disable it before we accidentally write anywhere we shouldn't.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When we PG (powergate) UVD, we need to re-initialize it
before we can use it again.

v2: rebase on UVD stop fixes
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only the APUs support power gating.

v2: disable cgcg for now
v3: workaround hw issue in mgcg
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

and remove duplicate si_rlc functions.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Restructure rlc setup to handle clock and power
gating.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The smc ucode is required for dpm (dynamic power
management), but if it's missing just skip dpm setup
and don't disable acceleration.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=67876Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For r6xx+ asics.  This mirrors the behavior of pre-r6xx
asics.  We need to program the MC even if something
else in startup() fails.  Failure to do so results in
an unusable GPU.

Based on a fix from: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Removing the clock/power or resetting the VCPU can cause
hangs if that happens in the middle of a register write.

Stall the memory and register bus before putting the VCPU
into reset. Keep it in reset when unloading the module or
suspending.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Coarse grain clockgating causes problems with reclocking on
some cards and powergating (verde only) causes problems with
ring initialization.  The proper fix (restructuring the init
sequences) is too invasive for 3.11 so just disable them for
now.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>