Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use two steps for memslot deletion: mark the slot invalid (which stops
instantiation of new shadow pages for that slot, but allows destruction),
then instantiate the new empty slot.

Also simplifies kvm_handle_hva locking.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Required for SRCU convertion later.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Have a pointer to an allocated region inside struct kvm.

[alex: fix ppc book 3s]
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

s390 doesn't have mmio, this will simplify ifdefing it out.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Len Brown pointed out that allmodconfig is broken for
ia64 because of:

arch/ia64/kvm/vmm.c: In function 'vmm_spin_unlock':
arch/ia64/kvm/vmm.c:70: error: 'spinlock_t' has no member named 'raw_lock'

KVM has it's own spinlock routines. It should not depend on the base kernel
spinlock_t type (which changed when ia64 switched to ticket locks).  Define
its own vmm_spinlock_t type.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

kbuild.h forces include of autoconf.h on the
commandline using -include - so we do not need to
include the file explicit.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

X86 CPUs need to have some magic happening to enable the virtualization
extensions on them. This magic can result in unpleasant results for
users, like blocking other VMMs from working (vmx) or using invalid TLB
entries (svm).

Currently KVM activates virtualization when the respective kernel module
is loaded. This blocks us from autoloading KVM modules without breaking
other VMMs.

To circumvent this problem at least a bit, this patch introduces on
demand activation of virtualization. This means, that instead
virtualization is enabled on creation of the first virtual machine
and disabled on destruction of the last one.

So using this, KVM can be easily autoloaded, while keeping other
hypervisors usable.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

Not the incorrect -EINVAL.
Signed-off-by: NAvi Kivity <avi@redhat.com>

The only thing it protects now is interrupt injection into lapic and
this can work lockless. Even now with kvm->irq_lock in place access
to lapic is not entirely serialized since vcpu access doesn't take
kvm->irq_lock.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The allows removal of irq_lock from the injection path.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Remove kvm_cpu_has_interrupt() and kvm_arch_interrupt_allowed() from
interface between general code and arch code. kvm_arch_vcpu_runnable()
checks for interrupts instead.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This changes bus accesses to use high-level kvm_io_bus_read/kvm_io_bus_write
functions. in_range now becomes unused so it is removed from device ops in
favor of read/write callbacks performing range checks internally.

This allows aliasing (mostly for in-kernel virtio), as well as better error
handling by making it possible to pass errors up to userspace.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Return EOPNOTSUPP for KVM_TRACE_ENABLE/PAUSE/DISABLE ioctls.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

[christian: remove unused variables on s390]
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Archs are free to use vcpu_id as they see fit. For x86 it is used as
vcpu's apic id. New ioctl is added to configure boot vcpu id that was
assumed to be 0 till now.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Use it instead of open code "vcpu_id zero is BSP" assumption.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Protect irq injection/acking data structures with a separate irq_lock
mutex. This fixes the following deadlock:

CPU A                               CPU B
kvm_vm_ioctl_deassign_dev_irq()
  mutex_lock(&kvm->lock);            worker_thread()
  -> kvm_deassign_irq()                -> kvm_assigned_dev_interrupt_work_handler()
    -> deassign_host_irq()               mutex_lock(&kvm->lock);
      -> cancel_work_sync() [blocked]

[gleb: fix ia64 path]
Reported-by: NAlex Williamson <alex.williamson@hp.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Init the itc_offset for all possible vCPUs. The current code by
mistake ends up only initializing the offset on vCPU 0.

Spotted by Gleb Natapov.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Reduce Kconfig code duplication.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Fix problem with double export of certain symbols from vsprintf.c
which we do not wish to export from the kvm-intel.ko module.

In addition, we do not have access to kallsyms_lookup() from the
module, so make sure to #undef CONFIG_KALLSYMS
Signed-off-by: NJes Sorensen <jes@sgi.com>
Acked-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

KVM uses a function call IPI to cause the exit of a guest running on a
physical cpu. For virtual interrupt notification there is no need to
wait on IPI receival, or to execute any function.

This is exactly what the reschedule IPI does, without the overhead
of function IPI. So use it instead of smp_call_function_single in
kvm_vcpu_kick.

Also change the "guest_mode" variable to a bit in vcpu->requests, and
use that to collapse multiple IPI's that would be issued between the
first one and zeroing of guest mode.

This allows kvm_vcpu_kick to called with interrupts disabled.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Restore local irq enabled state before calling kvm_arch_vcpu_init(),
which calls kmalloc(GFP_KERNEL).
Signed-off-by: NJes Sorensen <jes@sgi.com>
Acked-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Preserve interrupt status around call to kvm_insert_vmm_mappin()
in kvm_vcpu_pre_transition().
Signed-off-by: NJes Sorensen <jes@sgi.com>
Acked-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Make sure to restore the psr after calling kvm_insert_vmm_mapping()
which calls ia64_itr_entry() as it disables local interrupts and
kvm_vcpu_init() may sleep.

Avoids a warning from the lock debugging code.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

vti_vcpu_load() doesn't do anything, so lets get rid of it.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang<xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Flush all vcpu's TLB entries once changes guest's memory mapping.
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Reorder locking to avoid holding the slots_lock when entering
the guest.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang<xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Since kvm-intel modue can't be built-in, make kvm depend on
CONFIG_MODULES.
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently, the interrupt enable bit is cleared when in
the vmm.  This patch sets the bit and the external interrupts can
be dealt with when in the vmm.  This improves the I/O performance.
Signed-off-by: NYang Zhang <yang.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

kvm_vcpu_block() unhalts vpu on an interrupt/timer without checking
if interrupt window is actually opened.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently timer events are processed before entering guest mode. Move it
to main vcpu event loop since timer events should be processed even while
vcpu is halted.  Timer may cause interrupt/nmi to be injected and only then
vcpu will be unhalted.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Copy in SN2 RTC based ITC emulation for fast exit. The two versions
have the same size, so a dropin is simpler than patching the branch
instruction to hit the SN2 version.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Acked-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

On SN2 do not pass down the real ITC frequency, but rather patch the
values to match the SN2 RTC frequency.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Acked-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Move all reading of special register 'AR_ITC' into two functions, one
in the kernel and one in the VMM module. When running on SN2, base the
result on the RTC rather the system ITC, as the ITC isn't
synchronized.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Acked-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>