- 27 4月, 2006 15 次提交
-
-
由 Ralf Baechle 提交于
imajor()/iminor() should be used instead of accessing r_dev directly. Based on patch from Eric Sesterhenn (snakebyte@gmx.de). Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
It's been a horrible source of confusion and let users to shoot themselves into both feet with uzis to no end. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
This commit breaks sparse for 64bit kernel. The -m64 option is required. Also, some macro values (such as _MIPS_TUNE, etc.) contain double-quote characters so it would be better quoting arguments by single-quote characters. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
With recent rewrite for generic bitops, ffs() is defined the same way as the libc and compiler built-in routines (returns int instead of unsigned long). Use __ffs() for 64bit value. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
With recent rewrite for generic bitops, fls() for 32bit kernel with MIPS64_CPU is broken. Also, ffs(), fls() should be defined the same way as the libc and compiler built-in routines (returns int instead of unsigned long). Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
When unloading oprofile module with timer-mode, oprofile_arch_exit dereferences a NULL pointer. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] pxamci: fix data timeout calculation
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] nommu: trivial fixups for head-nommu.S and the Makefile [ARM] vfp: fix leak of VFP_NAN_FLAG into FPSCR [ARM] 3484/1: Correct AEABI CFLAGS for correct enum handling
-
由 Russell King 提交于
-
- 26 4月, 2006 25 次提交
-
-
由 Chandra Seetharaman 提交于
Few of the notifier_chain_register() callers use __init in the definition of notifier_call. It is incorrect as the function definition should be available after the initializations (they do not unregister them during initializations). This patch fixes all such usages to _not_ have the notifier_call __init section. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chandra Seetharaman 提交于
Few of the notifier_chain_register() callers use __devinitdata in the definition of notifier_block data structure. It is incorrect as the data structure should be available after the initializations (they do not unregister them during initializations). This was leading to an oops when notifier_chain_register() call is invoked for those callback chains after initialization. This patch fixes all such usages to _not_ have the notifier_block data structure in the init data section. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 James Morris 提交于
This patch addresses a flaw in LSM, where there is no mediation of readv() and writev() in for 32-bit compatible apps using a 64-bit kernel. This bug was discovered and fixed initially in the native readv/writev code [1], but was not fixed in the compat code. Thanks to Al for spotting this one. [1] http://lwn.net/Articles/154282/Signed-off-by: NJames Morris <jmorris@namei.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
All modifications of ->i_flags in inodes that might be visible to somebody else must be under ->i_mutex. That patch fixes ext3 ioctl() setting S_APPEND and friends. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Switched to use of sys_pread64()/sys_pwrite64() rather than keep duplicating their guts; among the little things that had been missing there were such as ret = security_file_permission (file, MAY_READ); Gotta love the LSM robustness, right? Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
sbi->s_group_desc is an array of pointers to buffer_head. memcpy() of buffer size from address of buffer_head is a bad idea - it will generate junk in any case, may oops if buffer_head is close to the end of slab page and next page is not mapped and isn't what was intended there. IOW, ->b_data is missing in that call. Fortunately, result doesn't go into the primary on-disk data structures, so only backup ones get crap written to them; that had allowed this bug to remain unnoticed until now. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://brick.kernel.dk/data/git/linux-2.6-block由 Linus Torvalds 提交于
* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] splice: add ->splice_write support for /dev/null [PATCH] splice: rearrange moving to/from pipe helpers [PATCH] Add support for the sys_vmsplice syscall [PATCH] splice: fix offset problems [PATCH] splice: fix min() warning
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] forcedeth: fix initialization [PATCH] sky2: version 1.2 [PATCH] sky2: reset function can be devinit [PATCH] sky2: use ALIGN() macro [PATCH] sky2: add fake idle irq timer [PATCH] sky2: reschedule if irq still pending [PATCH] bcm43xx: make PIO mode usable [PATCH] bcm43xx: add to MAINTAINERS [PATCH] softmac: fix SIOCSIWAP [PATCH] Fix crash on big-endian systems during scan e1000: Update truesize with the length of the packet for packet split [PATCH] Fix locking in gianfar
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [BRIDGE]: allow full size vlan packets
-
由 Jens Axboe 提交于
Useful for testing. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
We need these for people writing their own ->splice_read/write hooks. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Ayaz Abdulla 提交于
This patch fixes the nic initialization. If the nic was in low power mode, it brings it back to normal power. Also, it utilizes a new hardware reset during the init. I am resending based on feedback, I corrected the register size mapping and delay after posted write. Signed-Off-By: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Update to version 1.2 Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
The sky2_reset function only called from sky2_probe. Maybe the compiler was smart enough to figure this out already. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
The ALIGN() macro in kernel.h does the same math that the sky2 driver was using for padding. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Add an fake NAPI schedule once a second. This is an attempt to work around for broken configurations with edge-triggered interrupts. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
This is a workaround for the case edge-triggered irq's. Several users seem to have broken configurations sharing edge-triggered irq's. To avoid losing IRQ's, reshedule if more work arrives. The changes to netdevice.h are to extract the part that puts device back in list into separate inline. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
-
-
由 Jeff Garzik 提交于
-
由 Stephen Hemminger 提交于
Need to allow for VLAN header when bridging. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jens Axboe 提交于
sys_splice() moves data to/from pipes with a file input/output. sys_vmsplice() moves data to a pipe, with the input being a user address range instead. This uses an approach suggested by Linus, where we can hold partial ranges inside the pages[] map. Hopefully this will be useful for network receive support as well. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Miklos Szeredi 提交于
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
-
由 Miklos Szeredi 提交于
BKL does not protect against races if the task may sleep between checking and setting a value. So move checking of file->private_data near to setting it in fuse_fill_super(). Found by Al Viro. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
-