After the call to ->direct_IO the final reference to the file might have
been dropped by aio_complete already, and the call to file_accessed might
cause a use after free.

Instead update the access time before the I/O, similar to how we
update the time stamps before writes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

After the call to __blkdev_direct_IO the final reference to the file
might have been dropped by aio_complete already, and the call to
file_accessed might cause a use after free.

Instead update the access time before the I/O, similar to how we
update the time stamps before writes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-and-tested-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

One unfortunate quirk of the reference count and reverse mapping
btrees -- they can expand in size when blocks are written to *other*
allocation groups if, say, one large extent becomes a lot of tiny
extents.  Since we don't want to start throwing errors in the middle
of CoWing, we need to reserve some blocks to handle future expansion.
The transaction block reservation counters aren't sufficient here
because we have to have a reserve of blocks in every AG, not just
somewhere in the filesystem.

Therefore, create two per-AG block reservation pools.  One feeds the
AGFL so that rmapbt expansion always succeeds, and the other feeds all
other metadata so that refcountbt expansion never fails.

Use the count of how many reserved blocks we need to have on hand to
create a virtual reservation in the AG.  Through selective clamping of
the maximum length of allocation requests and of the length of the
longest free extent, we can make it look like there's less free space
in the AG unless the reservation owner is asking for blocks.

In other words, play some accounting tricks in-core to make sure that
we always have blocks available.  On the plus side, there's nothing to
clean up if we crash, which is contrast to the strategy that the rough
draft used (actually removing extents from the freespace btrees).
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

When xfs_defer_finish calls ->finish_item, it's possible that
(refcount) won't be able to finish all the work in a single
transaction.  When this happens, the ->finish_item handler should
shorten the log done item's list count, update the work item to
reflect where work should continue, and return -EAGAIN so that
defer_finish knows to retain the pending item on the pending list,
roll the transaction, and restart processing where we left off.

Plumb in the code and document how this mechanism is supposed to work.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Provide a helper method to count the number of blocks in a short form
btree.  The refcount and rmap btrees need to know the number of blocks
already in use to set up their per-AG block reservations during mount.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Create a helper to generate AG btree height calculator functions.
This will be used (much) later when we get to the refcount btree.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Remove the xfs_btree_bigkey mess and simply make xfs_btree_key big enough
to hold both keys in-core.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Use variable length array declarations for RUI log items,
and replace the open coded sizeof formulae with a single function.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Originally-From: Christoph Hellwig <hch@lst.de>

This function uses the iomap infrastructure to re-write all pages
in a given range.  This is useful for doing a copy-up of COW ranges,
and might be useful for scrubbing in the future.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Document the implementation of error handlers into sysfs.

[dchinner: Added lots more detail.]
Signed-off-by: NCarlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: NDave Chinner <dchinner@redhat.com>

As it stands today, the "fail immediately" vs. "retry forever"
values for max_retries and retry_timeout_seconds in the xfs metadata
error configurations are not consistent.

A retry_timeout_seconds of 0 means "retry forever," but a
max_retries of 0 means "fail immediately."

retry_timeout_seconds < 0 is disallowed, while max_retries == -1
means "retry forever."

Make this consistent across the error configs, such that a value of
0 means "fail immediately" (i.e. wait 0 seconds, or retry 0 times),
and a value of -1 always means "retry forever."

This makes retry_timeout a signed long to accommodate the -1, even
though it stores jiffies.  Given our limit of a 1 day maximum
timeout, this should be sufficient even at much higher HZ values
than we have available today.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Use 1U for unsigned int to avoid a overflow warning from UBSAN.

[   31.910858] UBSAN: Undefined behaviour in fs/xfs/xfs_buf_item.c:889:25
[   31.911252] signed integer overflow:
[   31.911478] -2147483648 - 1 cannot be represented in type 'int'
[   31.911846] CPU: 1 PID: 1011 Comm: tuned Tainted: G    B          ---- -------   3.10.0-327.28.3.el7.x86_64 #1
[   31.911857] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 01/07/2011
[   31.911866]  1ffff1004069cd3b 0000000076bec3fd ffff8802034e69a0 ffffffff81ee3140
[   31.911883]  ffff8802034e69b8 ffffffff81ee31fd ffffffffa0ad79e0 ffff8802034e6b20
[   31.911898]  ffffffff81ee46e2 0000002d515470c0 0000000000000001 0000000041b58ab3
[   31.911913] Call Trace:
[   31.911932]  [<ffffffff81ee3140>] dump_stack+0x1e/0x20
[   31.911947]  [<ffffffff81ee31fd>] ubsan_epilogue+0x12/0x55
[   31.911964]  [<ffffffff81ee46e2>] handle_overflow+0x1ba/0x215
[   31.912083]  [<ffffffff81ee4798>] __ubsan_handle_sub_overflow+0x2a/0x31
[   31.912204]  [<ffffffffa08676fb>] xfs_buf_item_log+0x34b/0x3f0 [xfs]
[   31.912314]  [<ffffffffa0880490>] xfs_trans_log_buf+0x120/0x260 [xfs]
[   31.912402]  [<ffffffffa079a890>] xfs_btree_log_recs+0x80/0xc0 [xfs]
[   31.912490]  [<ffffffffa07a29f8>] xfs_btree_delrec+0x11a8/0x2d50 [xfs]
[   31.913589]  [<ffffffffa07a86f9>] xfs_btree_delete+0xc9/0x260 [xfs]
[   31.913762]  [<ffffffffa075b5cf>] xfs_free_ag_extent+0x63f/0xe20 [xfs]
[   31.914339]  [<ffffffffa075ec0f>] xfs_free_extent+0x2af/0x3e0 [xfs]
[   31.914641]  [<ffffffffa0801b2b>] xfs_bmap_finish+0x32b/0x4b0 [xfs]
[   31.914841]  [<ffffffffa083c2e7>] xfs_itruncate_extents+0x3b7/0x740 [xfs]
[   31.915216]  [<ffffffffa08342fa>] xfs_setattr_size+0x60a/0x860 [xfs]
[   31.915471]  [<ffffffffa08345ea>] xfs_vn_setattr+0x9a/0xe0 [xfs]
[   31.915590]  [<ffffffff8149ad38>] notify_change+0x5c8/0x8a0
[   31.915607]  [<ffffffff81450f22>] do_truncate+0x122/0x1d0
[   31.915640]  [<ffffffff8147beee>] do_last+0x15de/0x2c80
[   31.915707]  [<ffffffff8147d777>] path_openat+0x1e7/0xcc0
[   31.915802]  [<ffffffff81480824>] do_filp_open+0xa4/0x160
[   31.915848]  [<ffffffff81453127>] do_sys_open+0x1b7/0x3f0
[   31.915879]  [<ffffffff81453392>] SyS_open+0x32/0x40
[   31.915897]  [<ffffffff81f08989>] system_call_fastpath+0x16/0x1b

[  240.086809] UBSAN: Undefined behaviour in fs/xfs/xfs_buf_item.c:866:34
[  240.086820] signed integer overflow:
[  240.086830] -2147483648 - 1 cannot be represented in type 'int'
[  240.086846] CPU: 1 PID: 12969 Comm: rm Tainted: G    B          ---- -------   3.10.0-327.28.3.el7.x86_64 #1
[  240.086857] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 01/07/2011
[  240.086868]  1ffff10040491def 00000000e2ea59c1 ffff88020248ef40 ffffffff81ee3140
[  240.086885]  ffff88020248ef58 ffffffff81ee31fd ffffffffa0ad79e0 ffff88020248f0c0
[  240.086901]  ffffffff81ee46e2 0000002d02488000 0000000000000001 0000000041b58ab3
[  240.086915] Call Trace:
[  240.086938]  [<ffffffff81ee3140>] dump_stack+0x1e/0x20
[  240.086953]  [<ffffffff81ee31fd>] ubsan_epilogue+0x12/0x55
[  240.086971]  [<ffffffff81ee46e2>] handle_overflow+0x1ba/0x215
...
Signed-off-by: NXie XiuQi <xiexiuqi@huawei.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Commit 2a6fba6d "xfs: only return -errno or success from attr ->put_listent"
changes the returnvalue of __xfs_xattr_put_listen to 0 in case when there is
insufficient space in the buffer assuming that setting context->count to -1
would be enough, but all of the ->put_listent callers only check seen_enough.
This results in a failed assertion:
XFS: Assertion failed: context->count >= 0, file: fs/xfs/xfs_xattr.c, line: 175
in insufficient buffer size case.

This is only reproducible with at least 2 xattrs and only when the buffer
gets depleted before the last one.

Furthermore if buffersize is such that it is enough to hold the last xattr's
name, but not enough to hold the sum of preceeding xattr names listxattr won't
fail with ERANGE, but will suceed returning last xattr's name without the
first character. The first character end's up overwriting data stored at
(context->alist - 1).
Signed-off-by: NArtem Savkov <asavkov@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

oss.sgi.com is going away, move contact details over to vger.

cc: <stable@vger.kernel.org>
Signed-off-by: NDave Chinner <david@fromorbit.com>

"blocks" should be added back to fdblocks at undo time, not taken
away, i.e. the minus sign should not be used.

This is a regression introduced by commit 0d485ada ("xfs: use
generic percpu counters for free block counter"). And it's found by
code inspection, I didn't it in real world, so there's no
reproducer.
Signed-off-by: NEryu Guan <eguan@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Christoph reports slab corruption when a deferred refcount update
aborts during _defer_finish().  The cause of this was broken log item
state tracking in xfs_defer_pending -- upon an abort,
_defer_trans_abort() will call abort_intent on all intent items,
including the ones that have already had a done item attached.

This is incorrect because each intent item has 2 refcount: the first
is released when the intent item is committed to the log; and the
second is released when the _done_ item is committed to the log, or
by the intent creator if there is no done item.  In other words, once
we log the done item, responsibility for releasing the intent item's
second refcount is transferred to the done item and /must not/ be
performed by anything else.

The dfp_committed flag should have been tracking whether or not we had
a done item so that _defer_trans_abort could decide if it needs to
abort the intent item, but due to a thinko this was not the case.  Rip
it out and track the done item directly so that we do the right thing
w.r.t. intent item freeing.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reported-by: NChristoph Hellwig <hch@infradead.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Filesystems like XFS that use extents should not set the
FIEMAP_EXTENT_MERGED flag in the fiemap extent structures.  To allow
for both behaviors for the upcoming gfs2 usage split the iomap
type field into type and flags, and only set FIEMAP_EXTENT_MERGED if
the IOMAP_F_MERGED flag is set.  The flags field will also come in
handy for future features such as shared extents on reflink-enabled
file systems.
Reported-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

xfs_wait_buftarg() waits for all pending I/O, drains the ioend
completion workqueue and walks the LRU until all buffers in the cache
have been released. This is traditionally an unmount operation` but the
mechanism is also reused during filesystem freeze.

xfs_wait_buftarg() invokes drain_workqueue() as part of the quiesce,
which is intended more for a shutdown sequence in that it indicates to
the queue that new operations are not expected once the drain has begun.
New work jobs after this point result in a WARN_ON_ONCE() and are
otherwise dropped.

With filesystem freeze, however, read operations are allowed and can
proceed during or after the workqueue drain. If such a read occurs
during the drain sequence, the workqueue infrastructure complains about
the queued ioend completion work item and drops it on the floor. As a
result, the buffer remains on the LRU and the freeze never completes.

Despite the fact that the overall buffer cache cleanup is not necessary
during freeze, fix up this operation such that it is safe to invoke
during non-unmount quiesce operations. Replace the drain_workqueue()
call with flush_workqueue(), which runs a similar serialization on
pending workqueue jobs without causing new jobs to be dropped. This is
safe for unmount as unmount independently locks out new operations by
the time xfs_wait_buftarg() is invoked.

cc: <stable@vger.kernel.org>
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

From inspection, the superblock sb_inprogress check is done in the
verifier and triggered only for the primary superblock via a
"bp->b_bn == XFS_SB_DADDR" check.

Unfortunately, the primary superblock is an uncached buffer, and
hence it is configured by xfs_buf_read_uncached() with:

	bp->b_bn = XFS_BUF_DADDR_NULL;  /* always null for uncached buffers */

And so this check never triggers. Fix it.

cc: <stable@vger.kernel.org>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

If the initial LOOKUP_LE in the simple query range fails to find
anything, we should attempt to increment the btree cursor to see
if there actually /are/ records for what we're trying to find.
Without this patch, a bnobt range query of (0, $agsize) returns
no results because the leftmost record never has a startblock
of zero.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

We only need the record's high key for the first record that we look
at; for all records, we /definitely/ need the regular record key.
Therefore, fix how the simple range query function gets its keys.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

When we're logging the last non-spare field in the AGF, we don't
need to log the spare fields, so plumb in a new AGF logging flag
to help us avoid that.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Since the kernel doesn't currently support the realtime rmapbt,
don't allow such filesystems to be mounted.  Support will appear
in a future release.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

If the caller passes in a cursor to a zero-height btree (which is
impossible), we never set block to anything but NULL, which causes the
later dereference of it to crash.  Instead, just return -EFSCORRUPTED.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

When we're really tight on space, xfs_alloc_ag_vextent_small() can
allocate a block from the AGFL and give it to the caller.  Since the
caller is never the AGFL-fixing method, we must remove the OWN_AG
reverse mapping because it will clash with whatever rmap the caller
wants to set up.  This bug was discovered by running generic/299
repeatedly.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Use a special read-only iomap_ops implementation to support fiemap on
the attr fork.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

We'll never get nimap == 0 for a successful return from xfs_bmapi_read,
so don't try to handle it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

No need to implement it for read-only mappings.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

By bassing through an -ENOENT, similar to the old XFS implementation of
FIEMAP_FLAG_XATTR.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
[hch: split from a larger patch]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

The flag is checked as supported, but then we do an unconditional
sync of the file, regardless of whether the flag is set or not. Make
the sync conditional on having the FIEMAP_FLAG_SYNC flag set.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

iov_iter_copy_from_user_atomic disables page faults internally, no need to
do it around the call.  This also brings the iomap code in line with
the original filemap version.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

This catches up with commit  2457ae ("mm: non-atomically mark page
accessed during page cache allocation where possible"), which
moved the initial access marking into the pagecache allocator.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Track the number of blocks used for the rmapbt in the AGF.  When we
get to the AG reservation code we need this counter to quickly
make our reservation during mount.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

When we do DAX IO, we try to invalidate the entire page cache held
on the file. This is incorrect as it will trash the entire mapping
tree that now tracks dirty state in exceptional entries in the radix
tree slots.

What we are trying to do is remove cached pages (e.g from reads
into holes) that sit in the radix tree over the range we are about
to write to. Hence we should just limit the invalidation to the
range we are about to overwrite.
Reported-by: NJan Kara <jack@suse.cz>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

The space reservations was without an explaination in commit

    "Add error reporting calls in error paths that return EFSCORRUPTED"

back in 2003.  There is no reason to reserve disk blocks in the
transaction when allocating blocks for delalloc space as we already
reserved the space when creating the delalloc extent.

With this fix we stop running out of the reserved pool in
generic/229, which has happened for long time with small blocksize
file systems, and has increased in severity with the new buffered
write path.

[ dchinner: we still need to pass the block reservation into
  xfs_bmapi_write() to ensure we don't deadlock during AG selection.
  See commit dbd5c8c9 ("xfs: pass total block res. as total
  xfs_bmapi_write() parameter") for more details on why this is
  necessary. ]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

The buffer I/O accounting mechanism tracks async buffers under I/O.  As
an optimization, the buffer I/O count is incremented only once on the
first async I/O for a given hold cycle of a buffer and decremented once
the buffer is released to the LRU (or freed).

xfs_buf_ioacct_dec() has an ASSERT() check for an XBF_ASYNC buffer, but
we have one or two corner cases where a buffer can be submitted for I/O
multiple times via different methods in a single hold cycle. If an async
I/O occurs first, the I/O count is incremented. If a sync I/O occurs
before the hold count drops, XBF_ASYNC is cleared by the time the I/O
count is decremented.

Remove the async assert check from xfs_buf_ioacct_dec() as this is a
perfectly valid scenario. For the purposes of I/O accounting, we really
only care about the buffer async state at I/O submission time.
Discovered-and-analyzed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>