Impact: fix boot tracer + sched tracer coupling bug

Fix a bug that made the sched_switch tracer unable to run
if set as the current_tracer after the boot tracer.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

This patch applies some corrections suggested by Steven Rostedt.

Change the type of shed_ref into int since it is used
into a Mutex, we don't need it anymore as an atomic
variable in the sched_switch tracer.
Also change the name of the register mutex.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: enhance boot trace output with scheduling events

Use the sched_switch tracer from the boot tracer.

We also can trace schedule events inside the initcalls.
Sched tracing is disabled after the initcall has finished and
then reenabled before the next one is started.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

When init_sched_switch_trace() is called, it has no reason to start
the sched tracer if the sched_ref is not zero.

_ If this is non-zero, the tracer is already used, but we can register it
to the tracing engine. There is already a security which avoid the tracer
probes not to be resgistered twice.

_ If this is zero, this block will not be used.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix race condition in sched_switch tracer

This patch fixes a race condition in the sched_switch tracer. If
several tasks (IE: concurrent initcalls) are playing with
tracing_start_cmdline_record() and tracing_stop_cmdline_record(), the
following situation could happen:

_ Task A and B are using the same tracepoint probe. Task A holds it.
  Task B is sleeping and doesn't hold it.

_ Task A frees the sched tracer, then sched_ref is decremented to 0.

_ Task A is preempted and hadn't yet unregistered its tracepoint
  probe, then B runs.

_ B increments sched_ref, sees it's 1 and then guess it has to
  register its probe. But it has not been freed by task A.

_ A lot of bad things can happen after that...
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: modify boot tracer

We used to disable the initcall tracing at a specified time (IE: end
of builtin initcalls). But we don't need it anymore. It will be
stopped when initcalls are finished.

However we want two things:

_Start this tracing only after pre-smp initcalls are finished.

_Since we are planning to trace sched_switches at the same time, we
want to enable them only during the initcall execution.

For this purpose, this patch introduce two functions to enable/disable
the sched_switch tracing during boot.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge branches 'tracing/ftrace', 'tracing/markers', 'tracing/mmiotrace', 'tracing/nmisafe', 'tracing/tracepoints' and 'tracing/urgent' into tracing/core

Impact: add new tracepoint APIs to allow the batched registration of probes

new APIs separate tracepoint_probe_register(),
tracepoint_probe_unregister() into 2 steps. The first step of them
is just update tracepoint_entry, not connect or disconnect.

this patch introduces tracepoint_probe_update_all() for update all.

these APIs are very useful for registering lots of probes
but just updating once. Another very important thing is that
*_noupdate APIs do not require module_mutex.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: simplify implementation

Now, unused memory is handled by struct tp_probes.

old code use these three field to handle unused memory.
struct tracepoint_entry {
	...
	struct rcu_head rcu;
	void *oldptr;
	unsigned char rcu_pending:1;
	...
};

in this way, unused memory is handled by struct tracepoint_entry.
it bring reenter bug(it was fixed) and tracepoint.c is filled
full of ".*rcu.*" code statements. this patch removes all these.

and:
  rcu_barrier_sched() is removed.
  Do not need regain tracepoints_mutex after tracepoint_update_probes()
  several little cleanup.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix on !stacktrace architectures

only select STACKTRACE on architectures that have STACKTRACE_SUPPORT

... since we also need to ifdef out the guts of ftrace_trace_stack().
We also want to disallow setting TRACE_ITER_STACKTRACE in trace_flags
on such configs, but that can wait.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: add new (optional) debug boot option

In order to facilitate early boot trouble, allow one to specify a tracer
on the kernel boot line.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide-gd: re-get capacity on revalidate
  tx4938ide: Avoid underflow on calculation of a wait cycle
  tx4938ide: Do not call devm_ioremap for whole 128KB
  tx4938ide: Check minimum cycle time and SHWT range (v2)
  ide: Switch to a common address
  ide-cd: fix DMA alignment regression

We need to re-get a removable media's capacity when revalidating the
disk so that its partitions get rescanned by the block layer.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: axboe@kernel.dk
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Make 'wt' variable signed while it can be negative during calculation.
Suggested-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: sshtylyov@ru.mvista.com
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Call devm_ioremap() for CS0 and CS1 separetely.
And some style cleanups.
Suggested-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: ralf@linux-mips.org
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

SHWT value is used as address valid to -CSx assertion and -CSx to -DIOx
assertion setup time, and contrarywise, -DIOx to -CSx release and -CSx
release to address invalid hold time, so it actualy applies 4 times and
so constitutes -DIOx recovery time.  Check requirement of the recovery
time and cycle time.  Also check SHWT maximum value.
Suggested-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: ralf@linux-mips.org
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

e5318b53 ("ide: use the dma safe check for
REQ_TYPE_ATA_PC") introduced a regression which caused some ATAPI drives to
turn off DMA for REQ_TYPE_BLOCK_PC commands while burning and thus degrading
performance and ultimately causing an excessive amount of underruns.

The issue is documented also in:
http://bugzilla.kernel.org/show_bug.cgi?id=11742.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: NValerio Passini <valerio.passini@unicam.it>
[bart: fixup patch description per comments from Sergei Shtylyov]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix PCI resource mapping on sparc64
  sparc64: Kill annoying warning when building compat_binfmt_elf.o
  sparc32: kernel/trace/trace.c wants DIE_OOPS
  sparc64: Fix __copy_{to,from}_user_inatomic defines.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits)
  af_unix: netns: fix problem of return value
  IRDA: remove double inclusion of module.h
  udp: multicast packets need to check namespace
  net: add documentation for skb recycling
  key: fix setkey(8) policy set breakage
  bpa10x: free sk_buff with kfree_skb
  xfrm: do not leak ESRCH to user space
  net: Really remove all of LOOPBACK_TSO code.
  netfilter: nf_conntrack_proto_gre: switch to register_pernet_gen_subsys()
  netns: add register_pernet_gen_subsys/unregister_pernet_gen_subsys
  net: delete excess kernel-doc notation
  pppoe: Fix socket leak.
  gianfar: Don't reset TBI<->SerDes link if it's already up
  gianfar: Fix race in TBI/SerDes configuration
  at91_ether: request/free GPIO for PHY interrupt
  amd8111e: fix dma_free_coherent context
  atl1: fix vlan tag regression
  SMC91x: delete unused local variable "lp"
  myri10ge: fix stop/go mmio ordering
  bonding: fix panic when taking bond interface down before removing module
  ...

s/user/used/
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a problem discovered in recent versions of ATI Mach64 driver
in X.org on sparc64 architecture. In short, the driver fails to mmap
MMIO aperture (PCI resource #2).

I've found that kernel's __pci_mmap_make_offset() returns EINVAL. It
checks whether user attempts to mmap more than the resource length,
which is 0x1000 bytes in our case. But PAGE_SIZE on SPARC64 is 0x2000
and this is what actually is being mmaped. So __pci_mmap_make_offset()
failed for this PCI resource.
Signed-off-by: NMax Dmitrichenko <dmitrmax@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

GCC warns because some tests against 32-bit values never evaluate to
true due to how TASK_SIZE is defined.

I always wanted to mimick powerpc's definition of TASK_SIZE, which
is simply TASK_SIZE_OF(current) and that also fixes the warning.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexander Beregalov reports oops in __bzero() called from
copy_from_user_fixup() called from iov_iter_copy_from_user_atomic(),
when running dbench on tmpfs on sparc64: its __copy_from_user_inatomic
and __copy_to_user_inatomic should be avoiding, not calling, the fixups.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fix problem of return value

net/unix/af_unix.c: unix_net_init()
when error appears, it should return 'error', not always return 0.
Signed-off-by: NJianjun Kong <jianjun@zeuux.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current UDP multicast delivery is not namespace aware.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Acked-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 04a4bb55 ("net: add
skb_recycle_check() to enable netdriver skb recycling") added a
method for network drivers to recycle skbuffs, but while use of
this mechanism was documented in the commit message, it should
really have been added as a docbook comment as well -- this
patch does that.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cirrusfb_zorro_unmap() may be called both from __devexit and (on
cleanup path) from __devinit.  So it needs to be a normal function,
same as for cirrusfb_pci_unmap()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Insufficient dependency - we really want CONFIG_RTC_CLASS=y there.
That will give us CONFIG_RTC_LIB=y, so the old dependency can be
simply replaced.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We broke O_NONBLOCK handling in OSS dmasound_core in 2.3.11-pre3 - the
original code copied f_flags to open_mode and then checked for
O_NONBLOCK in there, but that got changed to copying f_mode and
O_NONBLOCK has not reached that field in any kernel version.

Since we do not care for any other bits, the fix is obvious...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix AMDC1E and XTOPOLOGY conflict in cpufeature
  x86: build fix

Removed duplicated #include <linux/delay.h> in init/do_mounts_md.c.

The same compile error ("error: implicit declaration of function
'msleep'") got fixed twice:

 - f8b77d39 ("init/do_mounts_md.c:
   msleep compile fix")

 - 73b4a24f ("init/do_mounts_md.c must
   #include <linux/delay.h>")

by people adding the <linux/delay.h> include in two slightly different
places.  Andrew's quilt scripts happily ignore the fuzz, and will
re-apply the patch even though they had conflicts.
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This makes the late e820 resources use 'insert_resource_expand_to_fit()'
instead of doing a 'reserve_region_with_split()', and also avoids
marking them as IORESOURCE_BUSY.

This results in us being perfectly happy to use pre-existing PCI
resources even if they were marked as being in a reserved region, while
still avoiding any _new_ allocations in the reserved regions.  It also
makes for a simpler and more accurate resource tree.

Example resource allocation from Jonathan Corbet, who has firmware that
has an e820 reserved entry that covered a big range (e0000000-fed003ff),
and that had various PCI resources in it set up by firmware.

With old kernels, the reserved range would force us to re-allocate all
pre-existing PCI resources, and his reserved range would end up looking
like this:

	e0000000-fed003ff : reserved
	  fec00000-fec00fff : IOAPIC 0
	  fed00000-fed003ff : HPET 0

where only the pre-allocated special regions (IOAPIC and HPET) were kept
around.

With 2.6.28-rc2, which uses 'reserve_region_with_split()', Jonathan's
resource tree looked like this:

	e0000000-fe7fffff : reserved
	fe800000-fe8fffff : PCI Bus 0000:01
	 fe800000-fe8fffff : reserved
	fe900000-fe9d9aff : reserved
	fe9d9b00-fe9d9bff : 0000:00:1f.3
	 fe9d9b00-fe9d9bff : reserved
	fe9d9c00-fe9d9fff : 0000:00:1a.7
	 fe9d9c00-fe9d9fff : reserved
	fe9da000-fe9dafff : 0000:00:03.3
	 fe9da000-fe9dafff : reserved
	fe9db000-fe9dbfff : 0000:00:19.0
	 fe9db000-fe9dbfff : reserved
	fe9dc000-fe9dffff : 0000:00:1b.0
	 fe9dc000-fe9dffff : reserved
	fe9e0000-fe9fffff : 0000:00:19.0
	 fe9e0000-fe9fffff : reserved
	fea00000-fea7ffff : 0000:00:02.0
	 fea00000-fea7ffff : reserved
	fea80000-feafffff : 0000:00:02.1
	 fea80000-feafffff : reserved
	feb00000-febfffff : 0000:00:02.0
	 feb00000-febfffff : reserved
	fec00000-fed003ff : reserved
	 fec00000-fec00fff : IOAPIC 0
	 fed00000-fed003ff : HPET 0

and because the reserved entry had been split and moved into the
individual resources, and because it used the IORESOURCE_BUSY flag, the
drivers that actually wanted to _use_ those resources couldn't actually
attach to them:

	e1000e 0000:00:19.0: BAR 0: can't reserve mem region [0xfe9e0000-0xfe9fffff]
	HDA Intel 0000:00:1b.0: BAR 0: can't reserve mem region [0xfe9dc000-0xfe9dffff]

with this patch, the resource tree instead becomes

	e0000000-fed003ff : reserved
	  fe800000-fe8fffff : PCI Bus 0000:01
	  fe9d9b00-fe9d9bff : 0000:00:1f.3
	  fe9d9c00-fe9d9fff : 0000:00:1a.7
	    fe9d9c00-fe9d9fff : ehci_hcd
	  fe9da000-fe9dafff : 0000:00:03.3
	  fe9db000-fe9dbfff : 0000:00:19.0
	    fe9db000-fe9dbfff : e1000e
	  fe9dc000-fe9dffff : 0000:00:1b.0
	    fe9dc000-fe9dffff : ICH HD audio
	  fe9e0000-fe9fffff : 0000:00:19.0
	    fe9e0000-fe9fffff : e1000e
	  fea00000-fea7ffff : 0000:00:02.0
	  fea80000-feafffff : 0000:00:02.1
	  feb00000-febfffff : 0000:00:02.0
	  fec00000-fec00fff : IOAPIC 0
	  fed00000-fed003ff : HPET 0

ie the one reserved region now ends up surrounding all the PCI resources
that were allocated inside of it by firmware, and because it is not
marked BUSY, drivers have no problem attaching to the pre-allocated
resources.
Reported-and-tested-by: NJonathan Corbet <corbet@lwn.net>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>