Destroy lpfc_hba_index IDR on module exit, reclaiming the allocated memory.

This was detected by the following semantic patch (written by Luis Rodriguez
<mcgrof@suse.com>)
<SmPL>
@ defines_module_init @
declarer name module_init, module_exit;
declarer name DEFINE_IDR;
identifier init;
@@

module_init(init);

@ defines_module_exit @
identifier exit;
@@

module_exit(exit);

@ declares_idr depends on defines_module_init && defines_module_exit @
identifier idr;
@@

DEFINE_IDR(idr);

@ on_exit_calls_destroy depends on declares_idr && defines_module_exit @
identifier declares_idr.idr, defines_module_exit.exit;
@@

exit(void)
{
 ...
 idr_destroy(&idr);
 ...
}

@ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @
identifier declares_idr.idr, defines_module_exit.exit;
@@

exit(void)
{
 ...
 +idr_destroy(&idr);
}
</SmPL>
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJames Smart <james.smart@avagotech.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Currently the module parameter lpfc_sg_seg_count does not have effect
for sli3 devices.

In lpfc_sli_driver_resource_setup(), which is used for sli3, the code
writes the configured sg_seg_cnt into lpfc_template.sg_tablesize.
But lpfc_template is the template used for sli4 only. Thus the value should
correctly be written to lpfc_template_s3->sg_tablesize.

This patch is for kernel 4.1-rc5, but is tested with lpfc 10.2.405.26 only.
Signed-off-by: NBodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: NJames Smart <james.smart@avagotech.com>
Reviewed-by: NSebastian Herbszt <herbszt@gmx.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

kzalloc() returns a void pointer - no need to cast it in
drivers/scsi/lpfc/lpfc_init.c::lpfc_sli_driver_resource_setup()
Signed-off-by: NFiro Yang <firogm@gmail.com>
Signed-off-by: NJames Smart <james.smart@avagotech.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Remove trailing space from model description.
Signed-off-by: NSebastian Herbszt <herbszt@gmx.de>
Signed-off-by: NJames Smart <james.smart@avagotech.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

With blk-mq support in the mid-layer, lpfc can do IO steering based
on the information in the request tag.  This patch allows lpfc to use
blk-mq if enabled. If not enabled, we fall back into the emulex-internal
affinity mappings.

This feature can be turned on via CONFIG_SCSI_MQ_DEFAULT or passing
scsi_mod.use_blk_mq=Y as a parameter to the kernel.
Signed-off-by: NDick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: NJames Smart <james.smart@avagotech.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

We inadvertantly took the path to recreate the vport while in a
driver teardown path
Signed-off-by: NDick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: NJames Smart <james.smart@avagotech.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Signed-off-by: NDick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: NJames Smart <james.smart@avagotech.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Also has a little whitespace fixing.
Signed-off-by: NDick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: NJames Smart <james.smart@avagotech.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Update copyright to 2015
Signed-off-by: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Currently, the driver plays off the fact that older sli4 adapters have a
different rpi access pattern that allowed for the rpi reference to be
released earlier in the teardown sequence, allowing the driver to recycle
the rpi value sooner. Newer sli4 adapters have a different access pattern that
requires us to wait for a later mailbox completion. This changes the put
call location on the newer sli4 adapters.

Symptoms of the error are "0110 ELS" and the "0372 iotag" errors.
Signed-off-by: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Signed-off-by: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Signed-off-by: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Fix host reset escalation killing all IOs.

SLI-3 adapters will use a new host template. The template differs
from SLI-4 adapters in that it does not have an eh_host_reset_handler.

Lpfc has traditionally never had a host_reset. The host reset
handler was added when we ran into a stuck hardware condition on a
SLI-4 adapter. The host_reset will reset and reinit the pci function,
clearing the hardware condition.

Unfortunately, the host reset handler uses attach/detach code paths,
which makes scsi_add_host() and scsi_remove_host() calls. Meaning, a
host_reset will completely remove the scsi_host from the system. As a
new call to scsi_add_host() is made, the shost# changes, which results
in completely new scsi_devices and device names. All the older scsi
devices on the old shost# are now orphaned and unrecoverable.

We realize we need to re-implement the host_reset_handler so the scsi_host
stays registered across the host_reset, but that will be a rather
lengthy effort. In the short term, we had an immediate need to restore
the SLI-3 devices to their working behavior, with the easiest path being
to remove their host_reset handler.
Signed-off-by: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

This will detect and send an async event if overtemp is detected
Signed-off-by: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Signed-off-by: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>

Fixed Low priority issues from lpfc given by fortify source code scan.
Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fixed High priority issues from lpfc given by fortify source code scan.
Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fix IP Reset processing - wait for RDY before proceeding
Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fix discovery timeout during nameserver login
Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Reviewed-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Use the zeroing function instead of dma_alloc_coherent & memset(,0,)
Signed-off-by: NJoe Perches <joe@perches.com>
Reviewed-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Mark functions as static in lpfc/lpfc_init.c because they are not used
outside this file.

This eliminates the following warning in lpfc/lpfc_init.c:
drivers/scsi/lpfc/lpfc_init.c:652:1: warning: no previous prototype for ‘lpfc_hba_init_link’ [-Wmissing-prototypes]
drivers/scsi/lpfc/lpfc_init.c:753:1: warning: no previous prototype for ‘lpfc_hba_down_link’ [-Wmissing-prototypes]
drivers/scsi/lpfc/lpfc_init.c:3434:1: warning: no previous prototype for ‘lpfc_sli4_fcf_redisc_wait_tmo’ [-Wmissing-prototypes]
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Reviewed-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

There is no need to call pci_disable_msix() in case
the previous call to pci_enable_msix() failed
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Acked-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NJames Smart <james.smart@emulex.com>
Reviewed-By: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fix for cleaning up stale ring flag and sp_queue_event entries.
Signed-off-by: NJames Smart <james.smart@emulex.com>
Reviewed-By: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Update Copyright on changed files
Signed-off-by: NJames Smart <james.smart@emulex.com>
Reviewed-By: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Convert runtime references to old xlane cfg param to fof cfg param
Signed-off-by: NJames Smart <james.smart@emulex.com>
Reviewed-By: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fix SLI4 s abort loop to process all FCP rings and under ring_lock
Signed-off-by: NJames Smart <james.smart@emulex.com>
Reviewed-By: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fixed kernel panic in lpfc_abort_handler
Signed-off-by: NJames Smart <james.smart@emulex.com>
Reviewed-By: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fix locking for postbufq when freeing
Signed-off-by: NJames Smart <james.smart@emulex.com>
Reviewed-By: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fix locking for lpfc_hba_down_post
Signed-off-by: NJames Smart <james.smart@emulex.com>
Reviewed-By: NDick Kennedy <dick.kennedy@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The PCIE capability offset is saved during PCI bus walking.  It will
remove an unnecessary search in the PCI configuration space if this
value is referenced instead of reacquiring it.  Also, pci_is_pcie is a
better way of determining if the device is PCIE or not (as it uses the
same saved PCIE capability offset).
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Acked-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Since commit 0998d063
(device-core: Ensure drvdata = NULL when no driver is bound),
the driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>