The "cpu" argument to rcu_note_context_switch() is always the current
CPU, so drop it.  This in turn allows the "cpu" argument to
rcu_preempt_note_context_switch() to be removed, which allows the sole
use of "cpu" in both functions to be replaced with a this_cpu_ptr().
Again, the anticipated cross-CPU uses of these functions has been
replaced by NO_HZ_FULL.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NPranith Kumar <bobby.prani@gmail.com>

The rcu_bh_qs(), rcu_preempt_qs(), and rcu_sched_qs() functions use
old-style per-CPU variable access and write to ->passed_quiesce even
if it is already set.  This commit therefore updates to use the new-style
per-CPU variable access functions and avoids the spurious writes.
This commit also eliminates the "cpu" argument to these functions because
they are always invoked on the indicated CPU.
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit allows rcutorture to print additional state for the
RCU grace-period kthreads in cases where RCU seems reluctant to
start a new grace period.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

The following pattern is currently not well supported by RCU:

1.	Make data element inaccessible to RCU readers.

2.	Do work that probably lasts for more than one grace period.

3.	Do something to make sure RCU readers in flight before #1 above
	have completed.

Here are some things that could currently be done:

a.	Do a synchronize_rcu() unconditionally at either #1 or #3 above.
	This works, but imposes needless work and latency.

b.	Post an RCU callback at #1 above that does a wakeup, then
	wait for the wakeup at #3.  This works well, but likely results
	in an extra unneeded grace period.  Open-coding this is also
	a bit more semi-tricky code than would be good.

This commit therefore adds get_state_synchronize_rcu() and
cond_synchronize_rcu() APIs.  Call get_state_synchronize_rcu() at #1
above and pass its return value to cond_synchronize_rcu() at #3 above.
This results in a call to synchronize_rcu() if no grace period has
elapsed between #1 and #3, but requires only a load, comparison, and
memory barrier if a full grace period did elapse.
Requested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>

If CONFIG_RCU_NOCB_CPU_ALL=y, then rcu_needs_cpu() will always
return false, however, the current version nevertheless checks
for RCU callbacks.  This commit therefore creates a static inline
implementation of rcu_needs_cpu() that unconditionally returns false
when CONFIG_RCU_NOCB_CPU_ALL=y.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

All of the RCU source files have the usual GPL header, which contains a
long-obsolete postal address for FSF.  To avoid the need to track the
FSF office's movements, this commit substitutes the URL where GPL may
be found.
Reported-by: NGreg KH <gregkh@linuxfoundation.org>
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

Function prototypes don't need to have the "extern" keyword since this
is the default behavior. Its explicit use is redundant.  This commit
therefore removes them.
Signed-off-by: NTeodora Baluta <teobaluta@gmail.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

The old rcu_is_cpu_idle() function is just __rcu_is_watching() with
preemption disabled.  This commit therefore renames rcu_is_cpu_idle()
to rcu_is_watching.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

There is currently no way for kernel code to determine whether it
is safe to enter an RCU read-side critical section, in other words,
whether or not RCU is paying attention to the currently running CPU.
Given the large and increasing quantity of code shared by the idle loop
and non-idle code, the this shortcoming is becoming increasingly painful.

This commit therefore adds __rcu_is_watching(), which returns true if
it is safe to enter an RCU read-side critical section on the currently
running CPU.  This function is quite fast, using only a __this_cpu_read().
However, the caller must disable preemption.
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

Now that TINY_PREEMPT_RCU is no more, exit_rcu() is always an empty
function.  But if TINY_RCU is going to have an empty function, it should
be in include/linux/rcutiny.h, where it does not bloat the kernel.
This commit therefore moves exit_rcu() out of kernel/rcupdate.c to
kernel/rcutree_plugin.h, and places a static inline empty function in
include/linux/rcutiny.h in order to shrink TINY_RCU a bit.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

With the removal of CONFIG_TINY_PREEMPT_RCU, rcu_preempt_note_context_switch()
is now an empty function.  This commit therefore eliminates it by inlining it.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

Now that CONFIG_TINY_PREEMPT_RCU is no more, this commit removes
the CONFIG_TINY_RCU ifdefs from include/linux/rcutiny.h in favor of
unconditionally compiling the CONFIG_TINY_RCU legs of those ifdefs.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Moved removal of #else to "Remove TINY_PREEMPT_RCU" as
  suggested by Josh Triplett. ]
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

TINY_PREEMPT_RCU could use a kthread to handle RCU callback invocation,
which required an API to abstract kthread vs. softirq invocation.
Now that TINY_PREEMPT_RCU is no longer with us, this commit retires
this API in favor of direct use of the relevant softirq primitives.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

TINY_PREEMPT_RCU adds significant code and complexity, but does not
offer commensurate benefits.  People currently using TINY_PREEMPT_RCU
can get much better memory footprint with TINY_RCU, or, if they really
need preemptible RCU, they can use TREE_PREEMPT_RCU with a relatively
minor degradation in memory footprint.  Please note that this move
has been widely publicized on LKML (https://lkml.org/lkml/2012/11/12/545)
and on LWN (http://lwn.net/Articles/541037/).

This commit therefore removes TINY_PREEMPT_RCU.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Updated to eliminate #else in rcutiny.h as suggested by Josh ]
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This reverts commit 616c310e.
(Move PREEMPT_RCU preemption to switch_to() invocation).
Testing by Sasha Levin <levinsasha928@gmail.com> showed that this
can result in deadlock due to invoking the scheduler when one of
the runqueue locks is held.  Because this commit was simply a
performance optimization, revert it.
Reported-by: NSasha Levin <levinsasha928@gmail.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NSasha Levin <levinsasha928@gmail.com>

When a CPU is entering dyntick-idle mode, tick_nohz_stop_sched_tick()
calls rcu_needs_cpu() see if RCU needs that CPU, and, if not, computes the
next wakeup time based on the timer wheels.  Only later, when actually
entering the idle loop, rcu_prepare_for_idle() will be invoked.  In some
cases, rcu_prepare_for_idle() will post timers to wake the CPU back up.
But all for naught: The next wakeup time for the CPU has already been
computed, and posting a timer afterwards does not force that wakeup
time to be recomputed.  This means that rcu_prepare_for_idle()'s have
no effect.

This is not a problem on a busy system because something else will wake
up the CPU soon enough.  However, on lightly loaded systems, the CPU
might stay asleep for a considerable length of time.  If that CPU has
a callback that the rest of the system is waiting on, the system might
run very slowly or (in theory) even hang.

This commit avoids this problem by having rcu_needs_cpu() give
tick_nohz_stop_sched_tick() an estimate of when RCU will need the CPU
to wake back up, which tick_nohz_stop_sched_tick() takes into account
when programming the CPU's wakeup time.  An alternative approach is
for rcu_prepare_for_idle() to use hrtimers instead of normal timers,
but timers are much more efficient than are hrtimers for frequently
and repeatedly posting and cancelling a given timer, which is exactly
what RCU_FAST_NO_HZ does.
Reported-by: NPascal Chapperon <pascal.chapperon@wanadoo.fr>
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: NPascal Chapperon <pascal.chapperon@wanadoo.fr>

When running preemptible RCU, if a task exits in an RCU read-side
critical section having blocked within that same RCU read-side critical
section, the task must be removed from the list of tasks blocking a
grace period (perhaps the current grace period, perhaps the next grace
period, depending on timing).  The exit() path invokes exit_rcu() to
do this cleanup.

However, the current implementation of exit_rcu() needlessly does the
cleanup even if the task did not block within the current RCU read-side
critical section, which wastes time and needlessly increases the size
of the state space.  Fix this by only doing the cleanup if the current
task is actually on the list of tasks blocking some grace period.

While we are at it, consolidate the two identical exit_rcu() functions
into a single function.
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NLinus Torvalds <torvalds@linux-foundation.org>

Conflicts:

	kernel/rcupdate.c

Currently, PREEMPT_RCU readers are enqueued upon entry to the scheduler.
This is inefficient because enqueuing is required only if there is a
context switch, and entry to the scheduler does not guarantee a context
switch.

The commit therefore moves the enqueuing to immediately precede the
call to switch_to() from the scheduler.
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a port of commit #b0d30417 from TREE_RCU to TREE_PREEMPT_RCU.

Under some rare but real combinations of configuration parameters, RCU
callbacks are posted during early boot that use kernel facilities that are
not yet initialized.  Therefore, when these callbacks are invoked, hard
hangs and crashes ensue.  This commit therefore prevents RCU callbacks
from being invoked until after the scheduler is fully up and running,
as in after multiple tasks have been spawned.

It might well turn out that a better approach is to identify the specific
RCU callbacks that are causing this problem, but that discussion will
wait until such time as someone really needs an RCU callback to be invoked
(as opposed to merely registered) during early boot.
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

When CONFIG_RCU_FAST_NO_HZ is enabled, RCU will allow a given CPU to
enter dyntick-idle mode even if it still has RCU callbacks queued.
RCU avoids system hangs in this case by scheduling a timer for several
jiffies in the future.  However, if all of the callbacks on that CPU
are from kfree_rcu(), there is no reason to wake the CPU up, as it is
not a problem to defer freeing of memory.

This commit therefore tracks the number of callbacks on a given CPU
that are from kfree_rcu(), and avoids scheduling the timer if all of
a given CPU's callbacks are from kfree_rcu().
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

This patch #ifdefs TINY_RCU kthreads out of the kernel unless RCU_BOOST=y,
thus eliminating context-switch overhead if RCU priority boosting has
not been configured.
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Pull the code that waits for an RCU grace period into a single function,
which is then called by synchronize_rcu() and friends in the case of
TREE_RCU and TREE_PREEMPT_RCU, and from rcu_barrier() and friends in
the case of TINY_RCU and TINY_PREEMPT_RCU.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Provide rcu_virt_note_context_switch() for vitalization use to note
quiescent state during guest entry.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

The first version of synchronize_sched_expedited() used the migration
code in the scheduler, and was therefore implemented in kernel/sched.c.
However, the more recent version of this code no longer uses the
migration code, so this commit moves it to the main RCU source files.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

If RCU priority boosting is to be meaningful, callback invocation must
be boosted in addition to preempted RCU readers.  Otherwise, in presence
of CPU real-time threads, the grace period ends, but the callbacks don't
get invoked.  If the callbacks don't get invoked, the associated memory
doesn't get freed, so the system is still subject to OOM.

But it is not reasonable to priority-boost RCU_SOFTIRQ, so this commit
moves the callback invocations to a kthread, which can be boosted easily.
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

The CONFIG_PREEMPT_RCU kernel configuration parameter was recently
re-introduced, but as an indication of the type of RCU (preemptible
vs. non-preemptible) instead of as selecting a given implementation.
This commit uses CONFIG_PREEMPT_RCU to combine duplicate code
from include/linux/rcutiny.h and include/linux/rcutree.h into
include/linux/rcupdate.h.  This commit also combines a few other pieces
of duplicate code that have accumulated.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Combine the duplicate definitions of ULONG_CMP_GE(), ULONG_CMP_LT(),
and rcu_preempt_depth() into include/linux/rcupdate.h.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

When using a kernel debugger, a long sojourn in the debugger can get
you lots of RCU CPU stall warnings once you resume.  This might not be
helpful, especially if you are using the system console.  This patch
therefore allows RCU CPU stall warnings to be suppressed, but only for
the duration of the current set of grace periods.

This differs from Jason's original patch in that it adds support for
tiny RCU and preemptible RCU, and uses a slightly different method for
suppressing the RCU CPU stall warning messages.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NJason Wessel <jason.wessel@windriver.com>

Implement a small-memory-footprint uniprocessor-only implementation of
preemptible RCU.  This implementation uses but a single blocked-tasks
list rather than the combinatorial number used per leaf rcu_node by
TREE_PREEMPT_RCU, which reduces memory consumption and greatly simplifies
processing.  This version also takes advantage of uniprocessor execution
to accelerate grace periods in the case where there are no readers.

The general design is otherwise broadly similar to that of TREE_PREEMPT_RCU.

This implementation is a step towards having RCU implementation driven
off of the SMP and PREEMPT kernel configuration variables, which can
happen once this implementation has accumulated sufficient experience.

Removed ACCESS_ONCE() from __rcu_read_unlock() and added barrier() as
suggested by Steve Rostedt in order to avoid the compiler-reordering
issue noted by Mathieu Desnoyers (http://lkml.org/lkml/2010/8/16/183).

As can be seen below, CONFIG_TINY_PREEMPT_RCU represents almost 5Kbyte
savings compared to CONFIG_TREE_PREEMPT_RCU.  Of course, for non-real-time
workloads, CONFIG_TINY_RCU is even better.

	CONFIG_TREE_PREEMPT_RCU

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	   6170	    825	     28	   7023	   kernel/rcutree.o
				   ----
				   7026    Total

	CONFIG_TINY_PREEMPT_RCU

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	   2081	     81	      8	   2170	   kernel/rcutiny.o
				   ----
				   2183    Total

	CONFIG_TINY_RCU (non-preemptible)

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	    719	     25	      0	    744	   kernel/rcutiny.o
				    ---
				    757    Total
Requested-by: NLoïc Minier <loic.minier@canonical.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

TINY_RCU does not need rcu_scheduler_active unless CONFIG_DEBUG_LOCK_ALLOC.
So conditionally compile rcu_scheduler_active in order to slim down
rcutiny a bit more.  Also gets rid of an EXPORT_SYMBOL_GPL, which is
responsible for most of the slimming.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

The addition of preemptible RCU to treercu resulted in a bit of
confusion and inefficiency surrounding the handling of context switches
for RCU-sched and for RCU-preempt.  For RCU-sched, a context switch
is a quiescent state, pure and simple, just like it always has been.
For RCU-preempt, a context switch is in no way a quiescent state, but
special handling is required when a task blocks in an RCU read-side
critical section.

However, the callout from the scheduler and the outer loop in ksoftirqd
still calls something named rcu_sched_qs(), whose name is no longer
accurate.  Furthermore, when rcu_check_callbacks() notes an RCU-sched
quiescent state, it ends up unnecessarily (though harmlessly, aside
from the performance hit) enqueuing the current task if it happens to
be running in an RCU-preempt read-side critical section.  This not only
increases the maximum latency of scheduler_tick(), it also needlessly
increases the overhead of the next outermost rcu_read_unlock() invocation.

This patch addresses this situation by separating the notion of RCU's
context-switch handling from that of RCU-sched's quiescent states.
The context-switch handling is covered by rcu_note_context_switch() in
general and by rcu_preempt_note_context_switch() for preemptible RCU.
This permits rcu_sched_qs() to handle quiescent states and only quiescent
states.  It also reduces the maximum latency of scheduler_tick(), though
probably by much less than a microsecond.  Finally, it means that tasks
within preemptible-RCU read-side critical sections avoid incurring the
overhead of queuing unless there really is a context switch.
Suggested-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>

Because synchronize_rcu_bh() is identical to synchronize_sched(),
make the former a static inline invoking the latter, saving the
overhead of an EXPORT_SYMBOL_GPL() and the duplicate code.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Currently migration_thread is serving three purposes - migration
pusher, context to execute active_load_balance() and forced context
switcher for expedited RCU synchronize_sched.  All three roles are
hardcoded into migration_thread() and determining which job is
scheduled is slightly messy.

This patch kills migration_thread and replaces all three uses with
cpu_stop.  The three different roles of migration_thread() are
splitted into three separate cpu_stop callbacks -
migration_cpu_stop(), active_load_balance_cpu_stop() and
synchronize_sched_expedited_cpu_stop() - and each use case now simply
asks cpu_stop to execute the callback as necessary.

synchronize_sched_expedited() was implemented with private
preallocated resources and custom multi-cpu queueing and waiting
logic, both of which are provided by cpu_stop.
synchronize_sched_expedited_count is made atomic and all other shared
resources along with the mutex are dropped.

synchronize_sched_expedited() also implemented a check to detect cases
where not all the callback got executed on their assigned cpus and
fall back to synchronize_sched().  If called with cpu hotplug blocked,
cpu_stop already guarantees that and the condition cannot happen;
otherwise, stop_machine() would break.  However, this patch preserves
the paranoid check using a cpumask to record on which cpus the stopper
ran so that it can serve as a bisection point if something actually
goes wrong theree.

Because the internal execution state is no longer visible,
rcu_expedited_torture_stats() is removed.

This patch also renames cpu_stop threads to from "stopper/%d" to
"migration/%d".  The names of these threads ultimately don't matter
and there's no reason to make unnecessary userland visible changes.

With this patch applied, stop_machine() and sched now share the same
resources.  stop_machine() is faster without wasting any resources and
sched migration users are much cleaner.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Josh Triplett <josh@freedesktop.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>

Before the scheduler starts, all tasks are non-preemptible by
definition. So, during that time, rcu_read_lock_sched_held()
needs to always return "true".  This patch makes that be so.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1267135607-7056-2-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add force_quiescent_state() testing to rcutorture, with a
separate thread that repeatedly invokes force_quiescent_state()
in bursts. This can greatly increase the probability of
encountering certain types of race conditions.
Suggested-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1262646551116-git-send-email->
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In practice, it is harmless to voluntarily sleep in a
rcu_read_lock() section if we are running under preempt rcu, but
it is illegal if we build a kernel running non-preemptable rcu.

Currently, might_sleep() doesn't notice sleepable operations
under rcu_read_lock() sections if we are running under
preemptable rcu because preempt_count() is left untouched after
rcu_read_lock() in this case. But we want developers who test
their changes under such config to notice the "sleeping while
atomic" issues.

So we add rcu_read_lock_nesting to prempt_count() in
might_sleep() checks.

[ v2: Handle rcu-tiny ]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1260991265-8451-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove #ifdefs from kernel/rcupdate.c and
include/linux/rcupdate.h by moving code to
include/linux/rcutiny.h, include/linux/rcutree.h, and
kernel/rcutree.c.

Also remove some definitions that are no longer used.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1258908830885-git-send-email->
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The functions rcu_init() is a wrapper for __rcu_init(), and also
sets up the CPU-hotplug notifier for rcu_barrier_cpu_hotplug().
But TINY_RCU doesn't need CPU-hotplug notification, and the
rcu_barrier_cpu_hotplug() is a simple wrapper for
rcu_cpu_notify().

So push rcu_init() out to kernel/rcutree.c and kernel/rcutiny.c
and get rid of the wrapper function rcu_barrier_cpu_hotplug().
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <12589088302320-git-send-email->
Signed-off-by: NIngo Molnar <mingo@elte.hu>

No change in functionality - just straighten out a few small
stylistic details.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: avi@redhat.com
Cc: mtosatti@redhat.com
LKML-Reference: <12565226351355-git-send-email->
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch is a version of RCU designed for !SMP provided for a
small-footprint RCU implementation.  In particular, the
implementation of synchronize_rcu() is extremely lightweight and
high performance. It passes rcutorture testing in each of the
four relevant configurations (combinations of NO_HZ and PREEMPT)
on x86.  This saves about 1K bytes compared to old Classic RCU
(which is no longer in mainline), and more than three kilobytes
compared to Hierarchical RCU (updated to 2.6.30):

	CONFIG_TREE_RCU:

	   text	   data	    bss	    dec	    filename
	    183       4       0     187     kernel/rcupdate.o
	   2783     520      36    3339     kernel/rcutree.o
				   3526 Total (vs 4565 for v7)

	CONFIG_TREE_PREEMPT_RCU:

	   text	   data	    bss	    dec	    filename
	    263       4       0     267     kernel/rcupdate.o
	   4594     776      52    5422     kernel/rcutree.o
	   			   5689 Total (6155 for v7)

	CONFIG_TINY_RCU:

	   text	   data	    bss	    dec	    filename
	     96       4       0     100     kernel/rcupdate.o
	    734      24       0     758     kernel/rcutiny.o
	    			    858 Total (vs 848 for v7)

The above is for x86.  Your mileage may vary on other platforms.
Further compression is possible, but is being procrastinated.

Changes from v7 (http://lkml.org/lkml/2009/10/9/388)

o	Apply Lai Jiangshan's review comments (aside from
might_sleep() 	in synchronize_sched(), which is covered by SMP builds).

o	Fix up expedited primitives.

Changes from v6 (http://lkml.org/lkml/2009/9/23/293).

o	Forward ported to put it into the 2.6.33 stream.

o	Added lockdep support.

o	Make lightweight rcu_barrier.

Changes from v5 (http://lkml.org/lkml/2009/6/23/12).

o	Ported to latest pre-2.6.32 merge window kernel.

	- Renamed rcu_qsctr_inc() to rcu_sched_qs().
	- Renamed rcu_bh_qsctr_inc() to rcu_bh_qs().
	- Provided trivial rcu_cpu_notify().
	- Provided trivial exit_rcu().
	- Provided trivial rcu_needs_cpu().
	- Fixed up the rcu_*_enter/exit() functions in linux/hardirq.h.

o	Removed the dependence on EMBEDDED, with a view to making
	TINY_RCU default for !SMP at some time in the future.

o	Added (trivial) support for expedited grace periods.

Changes from v4 (http://lkml.org/lkml/2009/5/2/91) include:

o	Squeeze the size down a bit further by removing the
	->completed field from struct rcu_ctrlblk.

o	This permits synchronize_rcu() to become the empty function.
	Previous concerns about rcutorture were unfounded, as
	rcutorture correctly handles a constant value from
	rcu_batches_completed() and rcu_batches_completed_bh().

Changes from v3 (http://lkml.org/lkml/2009/3/29/221) include:

o	Changed rcu_batches_completed(), rcu_batches_completed_bh()
	rcu_enter_nohz(), rcu_exit_nohz(), rcu_nmi_enter(), and
	rcu_nmi_exit(), to be static inlines, as suggested by David
	Howells.  Doing this saves about 100 bytes from rcutiny.o.
	(The numbers between v3 and this v4 of the patch are not directly
	comparable, since they are against different versions of Linux.)

Changes from v2 (http://lkml.org/lkml/2009/2/3/333) include:

o	Fix whitespace issues.

o	Change short-circuit "||" operator to instead be "+" in order
to 	fix performance bug noted by "kraai" on LWN.

		(http://lwn.net/Articles/324348/)

Changes from v1 (http://lkml.org/lkml/2009/1/13/440) include:

o	This version depends on EMBEDDED as well as !SMP, as suggested
	by Ingo.

o	Updated rcu_needs_cpu() to unconditionally return zero,
	permitting the CPU to enter dynticks-idle mode at any time.
	This works because callbacks can be invoked upon entry to
	dynticks-idle mode.

o	Paul is now OK with this being included, based on a poll at
the 	Kernel Miniconf at linux.conf.au, where about ten people said
	that they cared about saving 900 bytes on single-CPU systems.

o	Applies to both mainline and tip/core/rcu.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NJosh Triplett <josh@joshtriplett.org>
Reviewed-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: avi@redhat.com
Cc: mtosatti@redhat.com
LKML-Reference: <12565226351355-git-send-email->
Signed-off-by: NIngo Molnar <mingo@elte.hu>