Dumping the callchains from breakpoint events with perf gives strange
results:

3.75%             perf  [kernel]           [k] _raw_read_unlock
                       |
                       --- _raw_read_unlock
                           perf_callchain
                           perf_prepare_sample
                           __perf_event_overflow
                           perf_swevent_overflow
                           perf_swevent_add
                           perf_bp_event
                           hw_breakpoint_exceptions_notify
                           notifier_call_chain
                           __atomic_notifier_call_chain
                           atomic_notifier_call_chain
                           notify_die
                           do_debug
                           debug
                           munmap

We are infected with all the debug stack. Like the nmi stack, the debug
stack is undesired as it is part of the profiling path, not helpful for
the user.

Ignore it.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>

The mce_disable_cpu() and mce_reenable_cpu() are called only
from mce_cpu_callback() which is marked as __cpuinit.
So these functions can be __cpuinit too.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <4B0E3C4E.4090809@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The validate_event() was failing on valid event combinations. The
function was assuming that if x86_schedule_event() returned 0, it
meant error. But x86_schedule_event() returns the counter index and
0 is a perfectly valid value. An error is returned if the function
returns a negative value.

Furthermore, validate_event() was also failing for event groups
because the event->pmu was not set until after
hw_perf_event_init().
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: paulus@samba.org
Cc: perfmon2-devel@lists.sourceforge.net
Cc: eranian@gmail.com
LKML-Reference: <4b0bdf36.1818d00a.07cc.25ae@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
--
 arch/x86/kernel/cpu/perf_event.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Decreases perf overhead when function tracing is enabled,
by about 50%.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Annotate init functions and data with __init and __initconst.
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@gmail.com>
LKML-Reference: <4AFB721E.8070203@ct.jp.nec.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The intel_init_thermal() is called from resume path, so it
cannot be marked as __init.

OTOH mce_banks_init() is only called from
__mcheck_cpu_cap_init() which is marked as __cpuinit, so it can
be also marked as __cpuinit.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: NYong Wang <yong.y.wang@linux.intel.com>
LKML-Reference: <4AFBB0B8.2070501@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Mark the thermal init functions __init so that the init memory
can be freed.
Signed-off-by: NYong Wang <yong.y.wang@intel.com>
LKML-Reference: <20091111075125.GA17900@ywang-moblin2.bj.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On platforms where the BIOS handles the thermal monitor interrupt,
APIC_LVTTHMR on each logical CPU is programmed to generate a SMI
and OS must not touch it.

Unfortunately AP bringup sequence using INIT-SIPI-SIPI clears all
the LVT entries except the mask bit. Essentially this results in
all LVT entries including the thermal monitoring interrupt set
to masked (clearing the bios programmed value for APIC_LVTTHMR).

And this leads to kernel take over the thermal monitoring
interrupt on AP's but not on BSP (leaving the bios programmed
value only on BSP).

As a result of this, we have seen system hangs when the thermal
monitoring interrupt is generated.

Fix this by reading the initial value of thermal LVT entry on
BSP and if bios has taken over the control, then program the
same value on all AP's and leave the thermal monitoring
interrupt control on all the logical cpu's to the bios.
Signed-off-by: NYong Wang <yong.y.wang@intel.com>
Reviewed-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20091110013824.GA24940@ywang-moblin2.bj.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: stable@kernel.org

Trivial typo.
Signed-off-by: NDave Jones <davej@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add an early initcall (pre SMP) which sets up global MCE
functionality.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <1255689093-26921-2-git-send-email-borislav.petkov@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Prefix global/setup routines with "mcheck_" thus differentiating
from the internal facilities prefixed with "mce_". Also, prefix
the per cpu calls with mcheck_cpu and rename them to reflect the
MCE setup hierarchy of calls better.

There should be no functionality change resulting from this
patch.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <1255689093-26921-1-git-send-email-borislav.petkov@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The MCE initialization code explicitly says it doesn't handle
asymmetric configurations where different CPUs support different
numbers of MCE banks, and it prints a big warning in that case.

Therefore, printing the "mce: CPU supports <x> MCE banks"
message into the kernel log for every CPU is pure redundancy
that clutters the log significantly for systems with lots of
CPUs.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
LKML-Reference: <adaeip473qt.fsf@cisco.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This approach is the first baby step towards solving many of the
structural problems the x86 MCE logging code is having today:

 - It has a private ring-buffer implementation that has a number
   of limitations and has been historically fragile and buggy.

 - It is using a quirky /dev/mcelog ioctl driven ABI that is MCE
   specific. /dev/mcelog is not part of any larger logging
   framework and hence has remained on the fringes for many years.

 - The MCE logging code is still very unclean partly due to its ABI
   limitations. Fields are being reused for multiple purposes, and
   the whole message structure is limited and x86 specific to begin
   with.

All in one, the x86 tree would like to move away from this private
implementation of an event logging facility to a broader framework.

By using perf events we gain the following advantages:

 - Multiple user-space agents can access MCE events. We can have an
   mcelog daemon running but also a system-wide tracer capturing
   important events in flight-recorder mode.

 - Sampling support: the kernel and the user-space call-chain of MCE
   events can be stored and analyzed as well. This way actual patterns
   of bad behavior can be matched to precisely what kind of activity
   happened in the kernel (and/or in the app) around that moment in
   time.

 - Coupling with other hardware and software events: the PMU can track a
   number of other anomalies - monitoring software might chose to
   monitor those plus the MCE events as well - in one coherent stream of
   events.

 - Discovery of MCE sources - tracepoints are enumerated and tools can
   act upon the existence (or non-existence) of various channels of MCE
   information.

 - Filtering support: we just subscribe to and act upon the events we
   are interested in. Then even on a per event source basis there's
   in-kernel filter expressions available that can restrict the amount
   of data that hits the event channel.

 - Arbitrary deep per cpu buffering of events - we can buffer 32
   entries or we can buffer as much as we want, as long as we have
   the RAM.

 - An NMI-safe ring-buffer implementation - mappable to user-space.

 - Built-in support for timestamping of events, PID markers, CPU
   markers, etc.

 - A rich ABI accessible over system call interface. Per cpu, per task
   and per workload monitoring of MCE events can be done this way. The
   ABI itself has a nice, meaningful structure.

 - Extensible ABI: new fields can be added without breaking tooling.
   New tracepoints can be added as the hardware side evolves. There's
   various parsers that can be used.

 - Lots of scheduling/buffering/batching modes of operandi for MCE
   events. poll() support. mmap() support. read() support. You name it.

 - Rich tooling support: even without any MCE specific extensions added
   the 'perf' tool today offers various views of MCE data: perf report,
   perf stat, perf trace can all be used to view logged MCE events and
   perhaps correlate them to certain user-space usage patterns. But it
   can be used directly as well, for user-space agents and policy action
   in mcelog, etc.

With this we hope to achieve significant code cleanup and feature
improvements in the MCE code, and we hope to be able to drop the
/dev/mcelog facility in the end.

This patch is just a plain dumb dump of mce_log() records to
the tracepoints / perf events framework - a first proof of
concept step.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <4AD42A0D.7050104@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

There was namespace overlap due to a rename i did - this caused
the following build warning, reported by Stephen Rothwell against
linux-next x86_64 allmodconfig:

  arch/x86/kernel/cpu/perf_event.c: In function 'intel_get_event_idx':
  arch/x86/kernel/cpu/perf_event.c:1445: warning: 'event_constraint' is used uninitialized in this function

This is a real bug not just a warning: fix it by renaming the
global event-constraints table pointer to 'event_constraints'.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091013144223.369d616d.sfr@canb.auug.org.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add an atomic notifier which ensures proper locking when conveying
MCE info to EDAC for decoding. The actual notifier call overrides a
default, negative priority notifier.

Note: make sure we register the default decoder only once since
mcheck_init() runs on each CPU.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20091003065752.GA8935@liondog.tnic>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>

Refuse to add events when the group wouldn't fit onto the PMU
anymore.

Naive implementation.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@gmail.com>
LKML-Reference: <1254911461.26976.239.camel@twins>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On some Intel processors, not all events can be measured in all
counters. Some events can only be measured in one particular
counter, for instance. Assigning an event to the wrong counter does
not crash the machine but this yields bogus counts, i.e., silent
error.

This patch changes the event to counter assignment logic to take
into account event constraints for Intel P6, Core and Nehalem
processors. There is no contraints on Intel Atom. There are
constraints on Intel Yonah (Core Duo) but they are not provided in
this patch given that this processor is not yet supported by
perf_events.

As a result of the constraints, it is possible for some event
groups to never actually be loaded onto the PMU if they contain two
events which can only be measured on a single counter. That
situation can be detected with the scaling information extracted
with read().
Signed-off-by: NStephane Eranian <eranian@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1254840129-6198-3-git-send-email-eranian@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Intel fixed counters do not support all the filters possible with a
generic counter. Thus, if a fixed counter event is passed but with
certain filters set, then the fixed_mode_idx() function must fail
and the event must be measured in a generic counter instead.

Reject filters are: inv, edge, cnt-mask.
Signed-off-by: NStephane Eranian <eranian@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1254840129-6198-2-git-send-email-eranian@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The current bound checks for copy_from_user in the MTRR driver are
not as obvious as they could be, and gcc agrees with that.

This patch simplifies the boundary checks to the point that gcc can
now prove to itself that the copy_from_user() is never going past
its bounds.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20090926205150.30797709@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make decoding of MCEs happen only on AMD hardware by registering a
non-default callback only on CPU families which support it.

While looking at the interaction of decode_mce() with the other MCE
code i also noticed a few other things and made the following
cleanups/fixes:

 - Fixed the mce_decode() weak alias - a weak alias is really not
   good here, it should be a proper callback. A weak alias will be
   overriden if a piece of code is built into the kernel - not
   good, obviously.

 - The patch initializes the callback on AMD family 10h and 11h.

 - Added the more correct fallback printk of:

	No support for human readable MCE decoding on this CPU type.
	Transcribe the message and run it through 'mcelog --ascii' to decode.

   On CPUs that dont have a decoder.

 - Made the surrounding code more readable.

Note that the callback allows us to have a default fallback -
without having to check the CPU versions during the printout
itself. When an EDAC module registers itself, it can install the
decode-print function.

(there's no unregister needed as this is core code.)

version -v2 by Borislav Petkov:

 - add K8 to the set of supported CPUs

 - always build in edac_mce_amd since we use an early_initcall now

 - fix checkpatch warnings
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <20091001141432.GA11410@aftab>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This reverts commit 22223c9b, as
requested by Andi Kleen:

  "Obviously kernels compiled with AMD support can still run on non AMD
   systems, so messages like this can never be removed at compile time."
Requsted-by: NAndi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use rdmsrl_safe() when accessing MCE registers. While in
theory we always 'know' which ones are safe to access from
the capability bits, there's a lot of hardware variations
and reality might differ from theory, as it did in this case:

   http://bugzilla.kernel.org/show_bug.cgi?id=14204

[    0.010016] mce: CPU supports 5 MCE banks
[    0.011029] general protection fault: 0000 [#1]
[    0.011998] last sysfs file:
[    0.011998] Modules linked in:
[    0.011998]
[    0.011998] Pid: 0, comm: swapper Not tainted (2.6.31_router #1) HP Vectra
[    0.011998] EIP: 0060:[<c100d9b9>] EFLAGS: 00010246 CPU: 0
[    0.011998] EIP is at mce_rdmsrl+0x19/0x60
[    0.011998] EAX: 00000000 EBX: 00000001 ECX: 00000407 EDX: 08000000
[    0.011998] ESI: 00000000 EDI: 8c000000 EBP: 00000405 ESP: c17d5eac

So WARN_ONCE() instead of crashing the box.

( also fix a number of stylistic inconsistencies in the code. )

Note, we might still crash in wrmsrl() if we get that far, but
we shouldnt if the registers are truly inaccessible.
Reported-by: NGNUtoo <GNUtoo@no-log.org>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <bug-14204-5438@http.bugzilla.kernel.org/>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Chris Malley reported that 'perf sched record' sometimes
crashes his box with:

[  389.272175] BUG: unable to handle kernel paging request at ffffb300
[  389.272294] IP: [<c011b0bd>] default_send_IPI_self+0x1d/0x50
[  389.272366] *pde = 0073f067 *pte = 00000000
[  389.274708] Call Trace:
[  389.274752]  [<c010e3b4>] ?  set_perf_event_pending+0x14/0x20
[  389.274801]  [<c01b9751>] ?  perf_output_unlock+0x121/0x1a0
[  389.274848]  [<c01b981a>] ? perf_output_end+0x4a/0x70
[  389.274893]  [<c01ba690>] ?  __perf_event_overflow+0x240/0x2f0
[  389.274942]  [<c030963e>] ? atomic64_cmpxchg+0x1e/0x30
[  389.274988]  [<c01ba8f4>] ?  perf_swevent_ctx_event+0x1b4/0x1c0
[  389.275035]  [<c01ba773>] ?  perf_swevent_ctx_event+0x33/0x1c0
[  389.275081]  [<c01ba9a7>] ? do_perf_sw_event+0xa7/0x160
[  389.275127]  [<c01baae2>] ? perf_tp_event+0x82/0xa0
[  389.275174]  [<c012e9c6>] ?  ftrace_profile_sched_stat_runtime+0xe6/0x120
[  389.275224]  [<c012e8e0>] ?  ftrace_profile_sched_stat_runtime+0x0/0x120
[  389.275273]  [<c013c85a>] ? update_curr+0x18a/0x230
[  389.275318]  [<c013cdc5>] ?  put_prev_task_fair+0x155/0x160
[  389.275366]  [<c01618b5>] ? sched_clock_cpu+0xd5/0x110
[  389.275413]  [<c04e7525>] ? _spin_lock_irq+0x45/0x50
[  389.275458]  [<c04e424e>] ? schedule+0x20e/0xb10

The problem is that the box has no lapic enabled:

  [    0.042445] Local APIC not detected. Using dummy APIC emulation.

The below seems like the best fix. We disabled all lapic bits, except
the self-IPI-resend logic.
Reported-by: NChris Malley <mail@chrismalley.co.uk>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <7863dc4c0909221409v7893bfd3o4b590d5951a233ba@mail.gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Current raise_local() uses a struct mce that comes from mce_write()
as a parameter instead of the real inject-msg, so when we set
mce.finished = 0 to clear injected MCE, the real inject stays
valid.

This will cause the remaining inject-msg affect the next injection,
which is not desired.

To fix this, real inject-msg is used in raise_local instead of the
one on the stack.

This patch is based on the diagnosis and the fixes by Dean Nelson.
Reported-by: NDean Nelson <dnelson@redhat.com>
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <1253601357.15717.757.camel@yhuang-dev.sh.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If a system switches back and forth between hot and cold mode,
the MCE code will print a stream of critical kernel messages.

Extend the throttling code to properly notice this, by
only printing the first hot + cold transition and omitting
the rest up to CHECK_INTERVAL (5 minutes).

This way we'll only get a single incident of:

 [  102.356584] CPU0: Temperature above threshold, cpu clock throttled (total events = 1)
 [  102.357000] Disabling lock debugging due to kernel taint
 [  102.369223] CPU0: Temperature/speed normal

Every 5 minutes. The 'total events' count tells the number of cold/hot
transitions detected, should overheating occur after 5 minutes again:

[  402.357580] CPU0: Temperature above threshold, cpu clock throttled (total events = 24891)
[  402.358001] CPU0: Temperature/speed normal
[  450.704142] Machine check events logged

Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Instead of a mess of three separate percpu variables, consolidate
the state into a single structure.

Also clean up therm_throt_process(), use cleaner and more
understandable variable names and a clearer logic.

This, without changing the logic, makes the code more
streamlined, more readable and smaller as well:

   text	   data	    bss	    dec	    hex	filename
   1487	    169	      4	   1660	    67c	therm_throt.o.before
   1432	    176	      4	   1612	    64c	therm_throt.o.after

Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This trivial patch fixes one missing space in printk.

I already fixed it about half a year ago or more, but the change (in
arch/x86/kernel/cpu/smpboot.c at that time) didn't made into
mainline yet.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

index 28e5f59..6c139ed 100644
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

 - provide compatibility Kconfig entry for existing PERF_COUNTERS .config's

 - provide courtesy copy of old perf_counter.h, for user-space projects

 - small indentation fixups

 - fix up MAINTAINERS

 - fix small x86 printout fallout

 - fix up small PowerPC comment fallout (use 'counter' as in register)
Reviewed-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )
Suggested-by: NStephane Eranian <eranian@google.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Reviewed-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In preparation to the renames, to avoid a namespace clash.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On an AMD-64 system the processor frequency that is printed during
system boot, may be different than the tsc frequency that was
returned by the hypervisor, due to the value returned from
calibrate_cpu.

For debugging timekeeping or other related issues it might be
better to get the tsc_khz value returned by the hypervisor.

The patch below now prints the tsc frequency that the VMware
hypervisor returned.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
LKML-Reference: <1252095219.12518.13.camel@ank32.eng.vmware.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove duplicated #include in:

  arch/x86/kernel/cpu/common.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Perhaps this is a more readable/standard form.
Signed-off-by: NJoe Perches <joe@perches.com>
LKML-Reference: <1252945687.3937.14.camel@Joe-Laptop.home>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Dave noticed that we leak the PMU resource reservations when we
fail the hardware counter init.
Reported-by: NDavid Miller <davem@davemloft.net>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NDavid Miller <davem@davemloft.net>
LKML-Reference: <1252483487.7746.164.camel@twins>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix the following 'make includecheck' warning:

  arch/x86/kernel/cpu/common.c: linux/smp.h is included more than once.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1252087783.6385.10.camel@ht.satnam>

Fix following compile warning:

  arch/x86/kernel/cpu/mcheck/mce_amd.c: In function 'threshold_create_bank':
  arch/x86/kernel/cpu/mcheck/mce_amd.c:492: warning: unused variable 'c'

which shows up when kernel is compiled with CONFIG_SMP=n.
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20090915151727.GB21670@alberich.amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch converts the existing power tracer into an event tracer,
so that power events (C states and frequency changes) can be
tracked via "perf".

This also removes the perl script that was used to demo the tracer;
its functionality is being replaced entirely with timechart.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130542.6d314860@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Draining the BTS buffer on a buffer overflow interrupt takes too
long resulting in a kernel lockup when tracing the kernel.

Restructure perf_counter sampling into sample creation and sample
output.

Prepare a single reference sample for BTS sampling and update the
from and to address fields when draining the BTS buffer. Drain the
entire BTS buffer between a single perf_output_begin() /
perf_output_end() pair.
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090915130023.A16204@sedona.ch.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fixes bugzilla #13780

From: Kurt Roeckx <kurt@roeckx.be>
Signed-off-by: NDave Jones <davej@redhat.com>