Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 13 9月, 2012 1 次提交
  3. 05 7月, 2012 1 次提交
  5. 04 7月, 2012 1 次提交
  7. 08 5月, 2012 1 次提交
  9. 07 10月, 2011 3 次提交
    • J
      ARM: OMAP3+: dpll: use DPLLs recalc function instead of omap2_get_dpll_rate · 49642ac8
      由 Jon Hunter 提交于 
      This is a continuation of Mike Turquette's patch "OMAP3+: use
DPLL's round_rate when setting rate".

omap3_noncore_dpll_set_rate() and omap3_noncore_dpll_enable() call
omap2_get_dpll_rate() explicitly. It may be necessary for some
DPLLs to use a different function and so use the DPLLs recalc()
function pointer instead.

An example is the DPLL_ABE on OMAP4 which can have a 4X multiplier
in addition to the usual MN multipler and dividers and therefore
uses a different round_rate and recalc function.
Signed-off-by: NJon Hunter <jon-hunter@ti.com>
Cc: Mike Turquette <mturquette@ti.com>
Cc: Misael Lopez Cruz <misael.lopez@ti.com>
[paul@pwsan.com: merged this patch with Mike's "use clock's recalc in DPLL
 handling" patch; also reported by Misael]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      49642ac8
    • M
      ARM: OMAP3+: dpll: assign clk rate from rounded rate during rate set · 273a1ce9
      由 Mike Turquette 提交于 
      The rounded rate can differ from target rate, so to better reflect
reality set clk->rate equal to the rounded rate when setting DPLL frequency.
This avoids issues where the DPLL frequency is slightly different than what
debugfs clock tree reports using the old target rate.

An example of a clock that requires this is DPLL_ABE on OMAP4 which
can have a 4x multiplier on top of the usual MN dividers depending on
register settings.  This requires a special round_rate function that
might yield a rate different from the initial target.
Signed-off-by: NMike Turquette <mturquette@ti.com>
Signed-off-by: NJon Hunter <jon-hunter@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      273a1ce9
    • M
      ARM: OMAP3+: dpll: use DPLL's round_rate when setting rate · addf888c
      由 Mike Turquette 提交于 
      omap3_noncore_dpll_set_rate uses omap2_dpll_round_rate explicitly.  Instead
use the struct clk pointer's round_rate function to allow for DPLL's with
special needs.

An example of a clock that requires this is DPLL_ABE on OMAP4 which
can have a 4x multiplier on top of the usual MN dividers depending on
register settings.  This requires a special round_rate function that
might yield a rate different from the initial target.
Signed-off-by: NMike Turquette <mturquette@ti.com>
Signed-off-by: NJon Hunter <jon-hunter@ti.com>
[paul@pwsan.com: split rate assignment portion into a separate patch]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      addf888c
  11. 22 12月, 2010 2 次提交
    • J
      OMAP: clock: fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4 · a36795c1
      由 Jon Hunter 提交于 
      J-Type DPLLs have additional configuration parameters that need to
be programmed when setting the multipler and divider for the DPLL.
These parameters being the sigma delta divider (SD_DIV) for the DPLL
and the digital controlled oscillator (DCO) to be used by the DPLL.

The current code is implemented specifically to configure the
OMAP3630 PER J-Type DPLL. The OMAP4430 USB DPLL is also a J-Type DPLL
and so this code needs to be updated to work for both OMAP3 and OMAP4
devices and any other future devices that have J-TYPE DPLLs.

For the OMAP3630 PER DPLL both the SD_DIV and DCO paramenters are
used but for the OMAP4430 USB DPLL only the SD_DIV field is used.
The current implementation will only program the SD_DIV and DCO
fields if the DPLL has both and hence this does not work for
OMAP4430.

In order to make the code more generic add two new fields to the
dpll_data structure for the SD_DIV field and DCO field bit-masks
and only program these fields if the masks are defined for a specific
DPLL. This simplifies the code and allows us to remove the flag
DPLL_NO_DCO_SEL.

Tested on OMAP36xx Zoom3 and OMAP4 Blaze.
Signed-off-by: NJon Hunter <jon-hunter@ti.com>
[paul@pwsan.com: removed explicit inlining and added '_' prefix on lookup_*()
 functions; added testing info to commit message; added 35xx comments back in]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      a36795c1
    • P
      OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files · 59fb659b
      由 Paul Walmsley 提交于 
      In preparation for adding OMAP4-specific PRCM accessor/mutator
functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific
files.  Most of what was in mach-omap2/{cm,prm}.{c,h} has now been
moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was
OMAP2xxx/3xxx-specific.

This process also requires the #includes in each of these files to be
changed to reference the new file name.  As part of doing so, add some
comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use
"sideways includes", to indicate that these users of the PRM/CM includes
should not be doing so.

Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this
patch.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Jarkko Nikula <jhnikula@gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Acked-by: NOmar Ramirez Luna <omar.ramirez@ti.com>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: NFelipe Contreras <felipe.contreras@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: NKevin Hilman <khilman@deeprootsystems.com>
Tested-by: NKevin Hilman <khilman@deeprootsystems.com>
Tested-by: NRajendra Nayak <rnayak@ti.com>
Tested-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
      59fb659b
  13. 26 11月, 2010 1 次提交
  15. 17 6月, 2010 1 次提交
  17. 25 2月, 2010 3 次提交
    • P
      OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation · 93340a22
      由 Paul Walmsley 提交于 
      The maximum DPLL multiplier (M) values for OMAP2xxx and OMAP3xxx are
one increment higher than they should be.  See for example the
OMAP242x TRM Rev X Section 5.10.6 "Clock Generator Registers" and the
OMAP36xx TRM Rev C Table 3-202 "CM_CLKSEL1_PLL".  Programming a 0 into
the DPLL's M register bitfield is valid for OMAP2/3 and indicates that
the DPLL should enter MN-bypass mode.  Also, increase the minimum
multiplier (M) value for the DPLL rate rounding code from 1 to 2, to
ensure that it does not inadvertently put the DPLL into bypass.

Note that the register documentation in the OMAP2xxx and OMAP3xxx TRMs
does not make clear that the actual DPLL divider value (the "N") is
the content of the appropriate register bitfield for the N value,
_plus one_.  (In other words, an N register bitfield of 0 indicates a
DPLL divider value of 1.)  This is only clearly documented in the
OMAP4430 TRM, in, for example, OMAP4430 TRM Rev A Table 3-1167
"CM_CLKSEL_DPLL_USB".

While here, update copyrights, add kerneldoc for struct dpll_data,
drop the unused struct dpll_data.max_tolerance field, remove some
unnecessary #includes in DPLL-related code, and replace the #include
of <linux/module.h> with <linux/list.h>, which is what was really
needed.  The OMAP4 clock autogenerator script has been updated
accordingly.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
      93340a22
    • R
      OMAP3 clock: introduce DPLL4 Jtype · 358965d7
      由 Richard Woodruff 提交于 
      DPLL4 for 3630 introduces a changed block called j type dpll, requiring
special divisor bits and additional reg fields. To allow for silicons to
use this, this is introduced as a flag and is enabled for 3630 silicon.
OMAP4 also has j type dpll for usb.

Tested with 3630 ZOOM3 and OMAP3430 ZOOM2
Signed-off-by: NRichard Woodruff <r-woodruff2@ti.com>
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NVishwanath BS <Vishwanath.bs@ti.com>
[paul@pwsan.com: added some comments; updated copyrights and credits; fixed
 some style issues]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      358965d7
    • V
      OMAP3 clock: Remove FreqSel for 3630 · 5eb75f55
      由 Vishwanath BS 提交于 
      DPLL_FREQSEL field in CLKEN_PLL register is no longer valid for
OMAP3630. So remove references to that.
Signed-off-by: NVishwanath BS <vishwanath.bs@ti.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
[paul@pwsan.com: added comment fix from Sergei Shtylyov]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      5eb75f55
  19. 30 1月, 2010 1 次提交
  21. 27 1月, 2010 1 次提交
  23. 12 12月, 2009 5 次提交
  25. 09 12月, 2009 1 次提交
  27. 02 12月, 2009 1 次提交
  29. 18 11月, 2009 1 次提交
  31. 21 10月, 2009 1 次提交
    • T
      omap: headers: Move remaining headers from include/mach to include/plat · ce491cf8
      由 Tony Lindgren 提交于 
      Move the remaining headers under plat-omap/include/mach
to plat-omap/include/plat. Also search and replace the
files using these headers to include using the right path.

This was done with:

#!/bin/bash
mach_dir_old="arch/arm/plat-omap/include/mach"
plat_dir_new="arch/arm/plat-omap/include/plat"
headers=$(cd $mach_dir_old && ls *.h)
omap_dirs="arch/arm/*omap*/ \
drivers/video/omap \
sound/soc/omap"
other_files="drivers/leds/leds-ams-delta.c \
drivers/mfd/menelaus.c \
drivers/mfd/twl4030-core.c \
drivers/mtd/nand/ams-delta.c"

for header in $headers; do
	old="#include <mach\/$header"
	new="#include <plat\/$header"
	for dir in $omap_dirs; do
		find $dir -type f -name \*.[chS] | \
			xargs sed -i "s/$old/$new/"
	done
	find drivers/ -type f -name \*omap*.[chS] | \
		xargs sed -i "s/$old/$new/"
	for file in $other_files; do
		sed -i "s/$old/$new/" $file
	done
done

for header in $(ls $mach_dir_old/*.h); do
	git mv $header $plat_dir_new/
done
Signed-off-by: NTony Lindgren <tony@atomide.com>
      ce491cf8
  33. 06 10月, 2009 1 次提交
  35. 04 9月, 2009 1 次提交
  37. 25 7月, 2009 2 次提交
    • P
      OMAP3 clock: correct module IDLEST bits: SSI; DSS; USBHOST; HSOTGUSB · 3c82e229
      由 Paul Walmsley 提交于 
      Fix two bugs in the OMAP3 clock tree pertaining to the SSI, DSS,
USBHOST, and HSOTGUSB devices.  These devices are both interconnect
initiators and targets.  Without this patch, clk_enable()s on clocks for
these modules can be very high latency (potentially up to ~200
milliseconds) and message such as the following are generated:

    Clock usbhost_48m_fck didn't enable in 100000 tries

Two bugs are fixed by this patch.  First, OMAP hardware only supports
target CM_IDLEST register bits on ES2+ chips and beyond.  ES1 chips
should not wait for these clocks to enable.  So, split the appropriate
clocks into ES1 and ES2+ variants, so that kernels running on ES1
devices won't try to wait.

Second, the current heuristic in omap2_clk_dflt_find_idlest() will
fail for these clocks.  It assumes that the CM_IDLEST bit to wait upon
is the same as the CM_*CLKEN bit, which is false[1].  Fix by
implementing custom clkops .find_idlest function pointers for the
appropriate clocks that return the correct slave IDLEST bit shift.

This was originally fixed in the linux-omap kernel during 2.6.29 in a
slightly different manner[2][3].

In the medium-term future, all of the module IDLEST code will
eventually be moved to the omap_hwmod code.

Problem reported by Jarkko Nikula <jhnikula@gmail.com>:

    http://marc.info/?l=linux-omap&m=124306184903679&w=2

...

1. See for example 34xx TRM Revision P Table 4-213 and 4-217 (for the
   DSS case).

2. http://www.spinics.net/lists/linux-omap/msg05512.html et seq.

3. http://lkml.indiana.edu/hypermail/linux/kernel/0901.3/01498.htmlSigned-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Jarkko Nikula <jhnikula@gmail.com>
      3c82e229
    • J
      OMAP3 SDRC: add support for 2 SDRAM chip selects · 58cda884
      由 Jean Pihet 提交于 
      Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2
SDRAM parts connected to the SDRC.

This patch adds the following:
- add a new argument of type omap_sdrc_params struct*
to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params
- adapted the OMAP boards files to the new prototype of
omap2_init_common_hw
- add the SDRC 2nd CS registers offsets defines
- adapt the sram sleep code to configure the SDRC for the 2nd CS

Note: If the 2nd param to omap2_init_common_hw is NULL, then the
parameters are not programmed into the SDRC CS1 registers

Tested on 3430 SDP and Beagleboard rev C2 and B5, with
suspend/resume and frequency changes (cpufreq).
Signed-off-by: NJean Pihet <jpihet@mvista.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      58cda884
  39. 20 6月, 2009 4 次提交
  41. 29 5月, 2009 1 次提交
  43. 16 5月, 2009 1 次提交
  45. 13 5月, 2009 4 次提交
  47. 20 2月, 2009 1 次提交
    • R
      [ARM] omap: add support for bypassing DPLLs · c0bf3132
      由 Russell King 提交于 
      This roughly corresponds with OMAP commits: 7d06c48, 3241b19,
88b5d9b, 18a5500, 9c909ac, 5c6497b, 8b1f0bd, 2ac1da8.

For both OMAP2 and OMAP3, we note the reference and bypass clocks in
the DPLL data structure.  Whenever we modify the DPLL rate, we first
ensure that both the reference and bypass clocks are enabled.  Then,
we decide whether to use the reference and DPLL, or the bypass clock
if the desired rate is identical to the bypass rate, and program the
DPLL appropriately.  Finally, we update the clock's parent, and then
disable the unused clocks.

This keeps the parents correctly balanced, and more importantly ensures
that the bypass clock is running whenever we reprogram the DPLL.  This
is especially important because the procedure for reprogramming the DPLL
involves switching to the bypass clock.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      c0bf3132