- 29 7月, 2009 1 次提交
-
-
由 Roel Kluin 提交于
e->sad[] is declared with size ELD_MAX_SAD=16, but the guard allows range 0-31. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Added a quirk entry for Dell Studio 1555. Reference: Novell bnc#525244 https://bugzilla.novell.com/show_bug.cgi?id=525244Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The master mute switch is wrongly implemented as checking the pointer instead of its value, thus it can be never muted. This patch fixes the issue. Reference: Novell bnc#404873 https://bugzilla.novell.com/show_bug.cgi?id=404873Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
- 23 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The commit 099db17e introduced a regression at suspend/resume where the GPIO1 bit isn't properly restored, thus the speaker output gets muted initially after resume. The fix is simple, use the cached write for storing GPIO data. Reference: Novell bnc#522764 https://bugzilla.novell.com/show_bug.cgi?id=522764Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Use snprint() for creating the jack name string instead of sprintf() in patch_sigmatel.c. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 7月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
The recent rewrite of the codec parser for STAC9872 caused a regression for some Sony VAIO models that don't give proper pin default configs by BIOS. Even using model=vaio doesn't work because the pin definitions are set after the pin overrides. This patch fixes the pin definitions in patch_stac9872() to be put in the right place before the pin overrides. Also the patch adds the new quirk entry for VAIO F/S to have the correct pin default configs. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
由 Hao Song 提交于
Gateway T6834c laptops need EAPD always on while the default behavior for the STAC9205 reference board is to turn it off upon every HP plug. By using the special "eapd" model, which is first introduced for Gateway T1616 laptops for this same reason, this peculiarity can be properly handled. Signed-off-by: NHao Song <baritono.tux@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 7月, 2009 1 次提交
-
-
由 Jaroslav Kysela 提交于
To prevent "Too many connections" message and the error path for some HDMI codecs (which makes onboard audio unusable), check for invalid zero connections for CONNECT_LIST verb. Signed-off-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 7月, 2009 2 次提交
-
-
由 Jaroslav Kysela 提交于
On some IbexPeak systems with ALC889A errors like "azx_get_response timeout, switching to polling mode: last cmd=0xaf9f000b" are produced, because non-existent codec #10 is wrongly accessed. The problem is that snd_hda_get_connections() returns out-of-range result for NID 0x1c (something like 0xf8f9 or 0xffff). This patch adds a check to alc880_parse_auto_config() to avoid using of this out-of-range NIDs. A better fix maybe to improve snd_hda_get_connections() routine to check for valid NID ranges if NIDs are expected as result. Signed-off-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Heidelberger 提交于
Simplify ALC882_TARGA and return gpio3 to ALC883_TARGA_DIG and ALC883_TARGA_2ch_DIG, which I accidentally removed in commit id 64a8be74Signed-off-by: NDavid Heidelberger <d.okias@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 7月, 2009 1 次提交
-
-
由 Paul Vojta 提交于
In the beep tone calculation for IDT/STAC codecs, lower numbers correspond to higher frequencies and vice versa. The current code has this backwards, resulting in beep frequencies which are way too high (and sound bad on tinny laptop speakers, resulting in complaints). [Also added hz <= 0 check by tiwai] Signed-off-by: NPaul Vojta <vojta@math.berkeley.edu> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 7月, 2009 4 次提交
-
-
由 Darren Salt 提交于
There is a regression, introduced in aa202455 (in alsa-kernel) which I noticed when trying to use the headphone socket on my EeeCPC 901: the output was *very* quiet, practically silent. This patch corrects the control types to that which was obviously intended in the referenced commit. Signed-off-by: NDarren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Andiry Brienza 提交于
HDA driver disabled HD audio 64bit address support for all AMD SB600/SB700/SB800 platforms with commit 09240cf4 due to one SB600 issue reported by community, but we do not see the similar issue on SB700/SB800 platforms. This patch is to refine the workaround for SB600 only. Signed-off-by: NAndiry Xu <andiry.xu@amd.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Check the widget type and don't take invalid widgets while parsing the capture source in patch_via.c. Also, fixed some compile warnings introduced in the previous commit. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The fixed widget NIDs in patch_via.c seem wrong for some codecs, and it resulted in the invalid capture source selection. This patch adds the code to parse the topology instead of using fixed numbers in order to get the right MUX widget id corresponding to the ADCs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 7月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
If the output pin is used and EAPD capability is present, turn on the EAPD bit. This fixes the silent output problem on ASUS laptops with VT1708S codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Minor clean up for initializing the digital-in pin. No functional changes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Release resources cleanly after errors in the sanity check in azx_pcm_open(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 7月, 2009 4 次提交
-
-
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Add some sanity checks of struct snd_pcm_hardware fields in the PCM open callback of hda driver. This makes a bit easier to debug any PCM setup errors in the codec side. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The PCM rates bit field may have been changed by the codec open callback. In that case, we need to reset rate_min and rate_max. So, simply call snd_pcm_lib_hw_rates() again after the codec open callback. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Check whether formats and rates don't result in zero due to the restriction of SPDIF sharing. If any of them can be zero, disable the SPDIF sharing mode instead. Otherwise it will lead to a PCM configuration error. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 7月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
The mixer elements created for ASUS eeePC 1000 with ALC269 aren't standard but strange words like "LineOut". Rename the element names to follow the standard one like "Headphone" and "Speaker". Also, split the volumes to each so that the virtual master can control them. The alc269_fujitsu_mixer is removed because it's now identical with the new eeepc mixer. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HP laptops with AD1984A codecs (at least mobile models) need to set GPIO1 appropriately to indicate the mute state. The BIOS checks this bit to judge whether the mute on or off is sent via F8 key. Without changing this bit, the BIOS can be confused and may toggle the mute wrongly. Reference: Novell bnc#515266 https://bugzilla.novell.com/show_bug.cgi?id=515266Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Added a quirk model=laptop for HP 6930p (103c:30dc) with AD1984A codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 6月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
During the changes to clean up / fix the realtek codec initialization routines in commit 4a79ba34, I forgot to add the check for ALC268 and ALC269. This resulted in the missing EAPD and COEF setup for these codecs. This patch adds the missing checks for these codecs. Reference: bko#13633 http://bugzilla.kernel.org/show_bug.cgi?id=13633Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Tony Vroon 提交于
The Line In connector is set up as PIN_IN by default, using VREF_HIZ. It is connected to both ADCs, so add it to both input selectors. Also add the ability to use the input mix (on a SoundBlaster one would call this "What You Hear"). Signed-off-by: NTony Vroon <tony@linx.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 6月, 2009 12 次提交
-
-
由 Takashi Iwai 提交于
For Acer Aspire 6930G (1025:015e), acre-aspire-6530g model matches obviously better. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Emilio López 提交于
Fix the following bugs of acer-aspire-6530g model with ALC888: - HP jack to mute all speaker outputs including LFE - Make digital built-in mic working Signed-off-by: NEmilio López <buhitoescolar@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Realtek codecs require the pin-sense trigger call before actually reading the pin-sense. Without this, the pin-detection might not be done accurately. This patch adds the pin-capability check and issues the trigger call if required. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
This reverts commit 9e9f46c4. Quoting from the commit message: "At this point, it seems to solve more problems than it causes, so let's try using it by default. It's an easy revert if it ends up causing trouble." And guess what? The _CRS code causes trouble. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/battery-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/battery-2.6: da9030_battery: Fix race between event handler and monitor Add MAX17040 Fuel Gauge driver w1: ds2760_battery: add support for sleep mode feature w1: ds2760: add support for EEPROM read and write ds2760_battery: cleanups in ds2760_battery_probe()
-
由 Linus Torvalds 提交于
Merge branches 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/{vfs-2.6,audit-current} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: another race fix in jfs_check_acl() Get "no acls for this inode" right, fix shmem breakage inline functions left without protection of ifdef (acl) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: audit: inode watches depend on CONFIG_AUDIT not CONFIG_AUDIT_SYSCALL
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Eric Paris 提交于
Even though one cannot make use of the audit watch code without CONFIG_AUDIT_SYSCALL the spaghetti nature of the audit code means that the audit rule filtering requires that it at least be compiled. Thus build the audit_watch code when we build auditfilter like it was before cfcad62c Clearly this is a point of potential future cleanup.. Reported-by: NFrans Pop <elendil@planet.nl> Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Markus Trippelsdorf 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: Fix the write access fault problem for real
-