refactor MFE code to allow for individual streaming configuration
for each frontend
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Adds new driver, mxl111sf, to support the WinTV-Aero-M
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Reviewed-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix division by zero in drxd triggered by running "femon" before any DVB
tuning has been done (by "scandvb" or anything else).
Signed-off-by: NEdward Sheldrake <ejsheldrake@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt.
Convert usb style logging macros to pr_<level>.
Remove now unused old usb style logging macros.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt.
Convert usb style logging macros to pr_<level>.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt.
Convert usb style logging macros to pr_<level>.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt.
Convert usb style logging macros to pr_<level>.
Coalesce formats.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt.
Convert usb style logging macros to pr_<level>.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt and convert usb style logging macro uses to pr_<level>.
Coalesce format strings.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NErik Andrén <erik.andren@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt.
Convert err macro use to pr_err.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt and convert printks to pr_<level>
Remove explicit prefixes from logging messages.
One of the prefixes was defective, a copy/paste error.
Use ##__VA_ARGS__ for variadic macros.
Whitespace neatening.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This converts some messages that were emitted at
KERN_INFO to KERN_DEBUG.  All of these messages
were guarded by bttv_debug tests.

Add pr_fmt.
Convert printks to pr_<level>
Convert printks without KERN_<level> to appropriate pr_<level>.
Removed embedded prefixes when pr_fmt was added.
Whitespace cleanups when around other conversions.
Macros coded with if statements should be do { if... } while (0)
so the macros can be used in other if tests.
Use ##__VA_ARGS__ for variadic macro as well.
Coalesce format strings.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt, convert printks to pr_<level>.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add pr_fmt.
Convert ene_warn and ene_notice to pr_<level>.
Use pr_debug in __dbg macro and a little neatening.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Standardize the mechanisms to emit logging messages.

A few other modules used an #include from saa7146,
convert those at the same time.

Add pr_fmt.
Convert printks to pr_<level>
Convert printks without KERN_<level> to appropriate pr_<level>.
Convert logging macros requiring multiple parentheses to normal style.
Removed embedded prefixes when pr_fmt was added.
Whitespace cleanups when around other conversions.
Use printf extension %pM to print mac address.
Coalesce format strings.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NMichael Hunold <michael@mihu.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The DVB framework will try to power-down an adapter that no-one is using
any more, but this assumes that the adapter is still connected to the
machine. That's not always true for a USB adapter, so disable the sleep
operations when the adapter has been physically unplugged.

This prevents I2C write failures with error -19 from appearing
occasionally in the dmesg log.
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There's no reason to still be holding the device list mutex for either of these
printk statements.
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch ensures that the em28xx_init_dev() function cleans up after itself,
in the event that it fails. This isimportant because the struct em28xx will be
deallocated if em28xx_init_dev() returns an error.

[mchehab@redhat.com: Fix merge conflicts and simplify the goto labels]
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use atomic bit operations for the em28xx_devused mask, to prevent an
unlikely race condition should two adapters be plugged in
simultaneously. The operations also clearer than explicit bit
manipulation anyway.
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

snprintf()'s size parameter includes space for the terminating '\0' character.
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

  dtv_property_cache_init().
  dtv_property_process_get().
  overwritten with invalid values, leading to partially incorrect
  results when calling FE_GET_PROPERTY.
Signed-off-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Usage of these flags has been deprecated for nearly 4 years by:

    commit f77bf014
    Author: Sam Ravnborg <sam@neptun.(none)>
    Date:   Mon Oct 15 22:25:06 2007 +0200

        kbuild: introduce ccflags-y, asflags-y and ldflags-y

Moreover, these flags (at least EXTRA_CFLAGS) have been documented for command
line use. By default, gmake(1) do not override command line setting, so this is
likely to result in build failure or unexpected behavior.

Replace their usage by Kbuild's `{as,cc,ld}flags-y'.

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: linux-media@vger.kernel.org
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Hi,

The following patch adds the IR code for the missing "OK" key to the Pinnacle
PCTV HD map. This map is now used by the PCTV 290e DVB-T2 device, whose remote
control has 26 buttons.
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Reviewed-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It seems just as necessary to free cam->vdev and cam in this error case as
in the next one.
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There were a several problems in this function:

1) Potential integer overflow in the comparison:
	if (fio.write_len + fio.read_len > 1028) {

2) If the user gave bogus values for write_len and read_len then
   returning -EINVAL is more appropriate than returning -ENOMEM.

3) wbuf was set to the address of an array and could never be NULL
   so I removed the pointless NULL check.

4) The call to vfree(wbuf) was improper.  That array is part of a
   larger struct and isn't allocated by itself.

5) flashio() can't actually fail, but we may as well add error
   handling in case this changes later.

6) In the default case where an ioctl is not implemented then
   returning -ENOTTY is more appropriate than returning -EFAULT.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch implements an i2c_gate_ctrl op for the cxd2820r. Thanks to Robert
Schlabbach for identifying the register address and field to set.

The old i2c intercept code that prefixed messages with a passthrough byte has
been removed and the PCTV nanoStick T2 290e entry in em28xx-dvb has been
updated appropriately.

Tested for DVB-T2 use; I would appreciate it if somebody with DVB-C capabilities
could test it as well - from inspection I cannot see any problems.

This is patch v2. It fixes some schoolboy style errors and removes superfluous
i2c entries in cxd2820r.h.
Signed-off-by: NSteve Kerrison <steve@stevekerrison.com>
Acked-by: NAntti Palosaari <crope@iki.fi>
Tested-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

  identify a satellite receiver by its 'delivery_system' instead of
  'modulation', which may overlap between different delivery systems.
Signed-off-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The ret = -EIO needs to be before the goto.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The goto needs to be moved after the assignment.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Tuners in general convert a high frequency carrier into an Intermediate
Frequency (IF).

Digital tuners like tda18271, xc3028, etc. generally allow changing the IF
frequency, although they generally have recommented settings for the IF.
Analog tuners, have a fixed IF frequency, that depends on the physical
characteristics of some analog components.

For digital tuners, it makes sense to have ways to configure IF,
via the tuner's configuration structure, like what's done inside the
tda18271-fe maps.

The demods need to know what IF is used by the tuner, as it will need
to convert internally from IF into baseband. Currently, the bridge driver
needs to fill a per-demod configuration struct for it, or pass it via
a dvb_attach parameter.

The tda18271 datasheet recommends to use different IF's for different
delivery system types and for different bandwidths.

The DRX-K demod also needs to know the IF frequency in order to work,
just like all other demods. However, as it accepts different delivery
systems (DVB-C and DVB-T), the IF may change if the standard and/or
bandwidth is changed.

So, the usual procedure of passing it via a config struct doesn't work.

One might try to code it as two separate IF frequencies, or even as a
table in function of the delivery system and the bandwidth, but this
will be messy.

So, it is better and simpler to just add a new callback for it and
require the tuners that can be used with MFE frontends like drx-k
to implement a new callback to return the used IF.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: NAntti Palosaari <crope@iki.fi>

Makes it more straight-forward to follow stack traces if the functions
don't have generic names. Using this as a crutch while trying to better
understand the lockdep warnings I get when loading the em28xx driver.

CC: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The one in-tree videobuf2-dma-sg driver (mmp-camera) has no need for a
kernel-space mapping of the buffers; one suspects that most other drivers
would not either.  The videobuf2-dma-sg module does the right thing if
buf->vaddr == NULL - it maps the buffer on demand if somebody needs it.  So
let's not map the buffer at allocation time; that will save a little CPU
time and a lot of address space in the vmalloc range.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

  - fepriv->parameters_out isn't protected by events->mtx, so
    move the call to fe->ops.get_frontend out of the locked area.
  - move the assignment of e->status into the locked area.

  - use direct assignment instead of memcpy.

  - use mutex_lock instead of mutex_lock_interruptible, because
    all code paths protected by this mutex won't block.
Signed-off-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

  the first event after an attempt to tune.
Signed-off-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

  enqueued before the frontend thread wakes up.
Signed-off-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

  Modify it to use the data given by the user.
Signed-off-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Delete nontrivial initialization that is immediately overwritten by the
result of an allocation function.

The semantic match that makes this change is as follows:

// <smpl>
@@
type T;
identifier i;
expression e;
@@

(
T i = \(0\|NULL\|ERR_PTR(...)\);
|
-T i = e;
+T i;
)
... when != i
i = \(kzalloc\|kcalloc\|kmalloc\)(...);

// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>