Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 22 4月, 2010 1 次提交
    • F
      tracing: Dump either the oops's cpu source or all cpus buffers · cecbca96
      由 Frederic Weisbecker 提交于 
      The ftrace_dump_on_oops kernel parameter, sysctl and sysrq let one
dump every cpu buffers when an oops or panic happens.

It's nice when you have few cpus but it may take ages if have many,
plus you miss the real origin of the problem in all the cpu traces.

Sometimes, all you need is to dump the cpu buffer that triggered the
opps, most of the time it is our main interest.

This patch modifies ftrace_dump_on_oops to handle this choice.

The ftrace_dump_on_oops kernel parameter, when it comes alone, has
the same behaviour than before. But ftrace_dump_on_oops=orig_cpu
will only dump the buffer of the cpu that oops'ed.

Similarly, sysctl kernel.ftrace_dump_on_oops=1 and
echo 1 > /proc/sys/kernel/ftrace_dump_on_oops keep their previous
behaviour. But setting 2 jumps into cpu origin dump mode.

v2: Fix double setup
v3: Fix spelling issues reported by Randy Dunlap
v4: Also update __ftrace_dump in the selftests
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
      cecbca96
  3. 19 4月, 2010 1 次提交
  5. 11 4月, 2010 1 次提交
  7. 07 4月, 2010 1 次提交
  9. 06 4月, 2010 3 次提交
    • A
      sched: Fix sched_getaffinity() · 84fba5ec
      由 Anton Blanchard 提交于 
      taskset on 2.6.34-rc3 fails on one of my ppc64 test boxes with
the following error:

  sched_getaffinity(0, 16, 0x10029650030) = -1 EINVAL (Invalid argument)

This box has 128 threads and 16 bytes is enough to cover it.

Commit cd3d8031 (sched:
sched_getaffinity(): Allow less than NR_CPUS length) is
comparing this 16 bytes agains nr_cpu_ids.

Fix it by comparing nr_cpu_ids to the number of bits in the
cpumask we pass in.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Sharyathi Nagesh <sharyath@in.ibm.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Mike Travis <travis@sgi.com>
LKML-Reference: <20100406070218.GM5594@kryten>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      84fba5ec
    • N
      Fix up possibly racy module refcounting · 5fbfb18d
      由 Nick Piggin 提交于 
      Module refcounting is implemented with a per-cpu counter for speed.
However there is a race when tallying the counter where a reference may
be taken by one CPU and released by another.  Reference count summation
may then see the decrement without having seen the previous increment,
leading to lower than expected count.  A module which never has its
actual reference drop below 1 may return a reference count of 0 due to
this race.

Module removal generally runs under stop_machine, which prevents this
race causing bugs due to removal of in-use modules.  However there are
other real bugs in module.c code and driver code (module_refcount is
exported) where the callers do not run under stop_machine.

Fix this by maintaining running per-cpu counters for the number of
module refcount increments and the number of refcount decrements.  The
increments are tallied after the decrements, so any decrement seen will
always have its corresponding increment counted.  The final refcount is
the difference of the total increments and decrements, preventing a
low-refcount from being returned.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      5fbfb18d
    • E
      audit: preface audit printk with audit · 449cedf0
      由 Eric Paris 提交于 
      There have been a number of reports of people seeing the message:
"name_count maxed, losing inode data: dev=00:05, inode=3185"
in dmesg.  These usually lead to people reporting problems to the filesystem
group who are in turn clueless what they mean.

Eventually someone finds me and I explain what is going on and that
these come from the audit system.  The basics of the problem is that the
audit subsystem never expects a single syscall to 'interact' (for some
wish washy meaning of interact) with more than 20 inodes.  But in fact
some operations like loading kernel modules can cause changes to lots of
inodes in debugfs.

There are a couple real fixes being bandied about including removing the
fixed compile time limit of 20 or not auditing changes in debugfs (or
both) but neither are small and obvious so I am not sending them for
immediate inclusion (I hope Al forwards a real solution next devel
window).

In the meantime this patch simply adds 'audit' to the beginning of the
crap message so if a user sees it, they come blame me first and we can
talk about what it means and make sure we understand all of the reasons
it can happen and make sure this gets solved correctly in the long run.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      449cedf0
  11. 05 4月, 2010 1 次提交
    • L
      tracing: Fix uninitialized variable of tracing/trace output · aa27497c
      由 Lai Jiangshan 提交于 
      Because a local variable is not initialized, I got these
when I did 'cat tracing/trace'. (not trace_pipe):

CPU:0 [LOST 18446744071579453134 EVENTS]
              ps-3099  [000]   560.770221: lock_acquire: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446744071579453134 EVENTS]
              ps-3099  [000]   560.770221: lock_release: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446612133255294080 EVENTS]
              ps-3099  [000]   560.770221: lock_acquire: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446744071579453134 EVENTS]
              ps-3099  [000]   560.770222: lock_release: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446744071579453134 EVENTS]
              ps-3099  [000]   560.770222: lock_release: ffffffff816cfb98 dcache_lock

See peek_next_entry(), it does not set *lost_events when we 'cat tracing/trace'
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4BB9A929.2000303@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      aa27497c
  13. 03 4月, 2010 8 次提交
  15. 01 4月, 2010 7 次提交
    • F
      perf: Use hot regs with software sched switch/migrate events · e49a5bd3
      由 Frederic Weisbecker 提交于 
      Scheduler's task migration events don't work because they always
pass NULL regs perf_sw_event(). The event hence gets filtered
in perf_swevent_add().

Scheduler's context switches events use task_pt_regs() to get
the context when the event occured which is a wrong thing to
do as this won't give us the place in the kernel where we went
to sleep but the place where we left userspace. The result is
even more wrong if we switch from a kernel thread.

Use the hot regs snapshot for both events as they belong to the
non-interrupt/exception based events family. Unlike page faults
or so that provide the regs matching the exact origin of the event,
we need to save the current context.

This makes the task migration event working and fix the context
switch callchains and origin ip.

Example: perf record -a -e cs

Before:

    10.91%      ksoftirqd/0                  0  [k] 0000000000000000
                |
                --- (nil)
                    perf_callchain
                    perf_prepare_sample
                    __perf_event_overflow
                    perf_swevent_overflow
                    perf_swevent_add
                    perf_swevent_ctx_event
                    do_perf_sw_event
                    __perf_sw_event
                    perf_event_task_sched_out
                    schedule
                    run_ksoftirqd
                    kthread
                    kernel_thread_helper

After:

    23.77%  hald-addon-stor  [kernel.kallsyms]  [k] schedule
            |
            --- schedule
               |
               |--60.00%-- schedule_timeout
               |          wait_for_common
               |          wait_for_completion
               |          blk_execute_rq
               |          scsi_execute
               |          scsi_execute_req
               |          sr_test_unit_ready
               |          |
               |          |--66.67%-- sr_media_change
               |          |          media_changed
               |          |          cdrom_media_changed
               |          |          sr_block_media_changed
               |          |          check_disk_change
               |          |          cdrom_open

v2: Always build perf_arch_fetch_caller_regs() now that software
events need that too. They don't need it from modules, unlike trace
events, so we keep the EXPORT_SYMBOL in trace_event_perf.c
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
      e49a5bd3
    • F
      perf: Correctly align perf event tracing buffer · eb1e7961
      由 Frederic Weisbecker 提交于 
      The trace event buffer used by perf to record raw sample events
is typed as an array of char and may then not be aligned to 8
by alloc_percpu().

But we need it to be aligned to 8 in sparc64 because we cast
this buffer into a random structure type built by the TRACE_EVENT()
macro to store the traces. So if a random 64 bits field is accessed
inside, it may be not under an expected good alignment.

Use an array of long instead to force the appropriate alignment, and
perform a compile time check to ensure the size in byte of the buffer
is a multiple of sizeof(long) so that its actual size doesn't get
shrinked under us.

This fixes unaligned accesses reported while using perf lock
in sparc 64.
Suggested-by: NDavid Miller <davem@davemloft.net>
Suggested-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
      eb1e7961
    • S
      ring-buffer: Add lost event count to end of sub buffer · ff0ff84a
      由 Steven Rostedt 提交于 
      Currently, binary readers of the ring buffer only know where events were
lost, but not how many events were lost at that location.
This information is available, but it would require adding another
field to the sub buffer header to include it.

But when a event can not fit at the end of a sub buffer, it is written
to the next sub buffer. This means there is a good chance that the
buffer may have room to hold this counter. If it does, write
the counter at the end of the sub buffer and set another flag
in the data size field that states that this information exists.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      ff0ff84a
    • S
      tracing: Show the lost events in the trace_pipe output · bc21b478
      由 Steven Rostedt 提交于 
      Now that the ring buffer can keep track of where events are lost.
Use this information to the output of trace_pipe:

       hackbench-3588  [001]  1326.701660: lock_acquire: ffffffff816591e0 read rcu_read_lock
       hackbench-3588  [001]  1326.701661: lock_acquire: ffff88003f4091f0 &(&dentry->d_lock)->rlock
       hackbench-3588  [001]  1326.701664: lock_release: ffff88003f4091f0 &(&dentry->d_lock)->rlock
CPU:1 [LOST 673 EVENTS]
       hackbench-3588  [001]  1326.702711: kmem_cache_free: call_site=ffffffff81102b85 ptr=ffff880026d96738
       hackbench-3588  [001]  1326.702712: lock_release: ffff88003e1480a8 &mm->mmap_sem
       hackbench-3588  [001]  1326.702713: lock_acquire: ffff88003e1480a8 &mm->mmap_sem

Even works with the function graph tracer:

 2) ! 170.098 us  |                                            }
 2)   4.036 us    |                                            rcu_irq_exit();
 2)   3.657 us    |                                            idle_cpu();
 2) ! 190.301 us  |                                          }
CPU:2 [LOST 2196 EVENTS]
 2)   0.853 us    |                            } /* cancel_dirty_page */
 2)               |                            remove_from_page_cache() {
 2)   1.578 us    |                              _raw_spin_lock_irq();
 2)               |                              __remove_from_page_cache() {

Note, it does not work with the iterator "trace" file, since it requires
the use of consuming the page from the ring buffer to determine how many
events were lost, which the iterator does not do.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      bc21b478
    • S
      ring-buffer: Add place holder recording of dropped events · 66a8cb95
      由 Steven Rostedt 提交于 
      Currently, when the ring buffer drops events, it does not record
the fact that it did so. It does inform the writer that the event
was dropped by returning a NULL event, but it does not put in any
place holder where the event was dropped.

This is not a trivial thing to add because the ring buffer mostly
runs in overwrite (flight recorder) mode. That is, when the ring
buffer is full, new data will overwrite old data.

In a produce/consumer mode, where new data is simply dropped when
the ring buffer is full, it is trivial to add the placeholder
for dropped events. When there's more room to write new data, then
a special event can be added to notify the reader about the dropped
events.

But in overwrite mode, any new write can overwrite events. A place
holder can not be inserted into the ring buffer since there never
may be room. A reader could also come in at anytime and miss the
placeholder.

Luckily, the way the ring buffer works, the read side can find out
if events were lost or not, and how many events. Everytime a write
takes place, if it overwrites the header page (the next read) it
updates a "overrun" variable that keeps track of the number of
lost events. When a reader swaps out a page from the ring buffer,
it can record this number, perfom the swap, and then check to
see if the number changed, and take the diff if it has, which would be
the number of events dropped. This can be stored by the reader
and returned to callers of the reader.

Since the reader page swap will fail if the writer moved the head
page since the time the reader page set up the swap, this gives room
to record the overruns without worrying about races. If the reader
sets up the pages, records the overrun, than performs the swap,
if the swap succeeds, then the overrun variable has not been
updated since the setup before the swap.

For binary readers of the ring buffer, a flag is set in the header
of each sub page (sub buffer) of the ring buffer. This flag is embedded
in the size field of the data on the sub buffer, in the 31st bit (the size
can be 32 or 64 bits depending on the architecture), but only 27
bits needs to be used for the actual size (less actually).

We could add a new field in the sub buffer header to also record the
number of events dropped since the last read, but this will change the
format of the binary ring buffer a bit too much. Perhaps this change can
be made if the information on the number of events dropped is considered
important enough.

Note, the notification of dropped events is only used by consuming reads
or peeking at the ring buffer. Iterating over the ring buffer does not
keep this information because the necessary data is only available when
a page swap is made, and the iterator does not swap out pages.

Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      66a8cb95
    • S
      tracing: Fix compile error in module tracepoints when MODULE_UNLOAD not set · eb0c5377
      由 Steven Rostedt 提交于 
      If modules are configured in the build but unloading of modules is not,
then the refcnt is not defined. Place the get/put module tracepoints
under CONFIG_MODULE_UNLOAD since it references this field in the module
structure.

As a side-effect, this patch also reduces the code when MODULE_UNLOAD
is not set, because these unused tracepoints are not created.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      eb0c5377
    • L
      tracing: Remove side effect from module tracepoints that caused a GPF · ae832d1e
      由 Li Zefan 提交于 
      Remove the @refcnt argument, because it has side-effects, and arguments with
side-effects are not skipped by the jump over disabled instrumentation and are
executed even when the tracepoint is disabled.

This was also causing a GPF as found by Randy Dunlap:

Subject: 2.6.33 GP fault only when built with tracing
LKML-Reference: <4BA2B69D.3000309@oracle.com>

Note, the current 2.6.34-rc has a fix for the actual cause of the GPF,
but this fixes one of its triggers.
Tested-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BA97FA7.6040406@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      ae832d1e
  17. 31 3月, 2010 1 次提交
    • T
      genirq: Force MSI irq handlers to run with interrupts disabled · 753649db
      由 Thomas Gleixner 提交于 
      Network folks reported that directing all MSI-X vectors of their multi
queue NICs to a single core can cause interrupt stack overflows when
enough interrupts fire at the same time.

This is caused by the fact that we run interrupt handlers by default
with interrupts enabled unless the driver reuqests the interrupt with
the IRQF_DISABLED set. The NIC handlers do not set this flag, so
simultaneous interrupts can nest unlimited and cause the stack
overflow.

The only safe counter measure is to run the interrupt handlers with
interrupts disabled. We can't switch to this mode in general right
now, but it is safe to do so for MSI interrupts.

Force IRQF_DISABLED for MSI interrupt handlers.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Linus Torvalds <torvalds@osdl.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: stable@kernel.org
      753649db
  19. 30 3月, 2010 7 次提交
    • T
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking... · 5a0e3ad6
      由 Tejun Heo 提交于 
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      5a0e3ad6
    • M
      CRED: Fix memory leak in error handling · 570b8fb5
      由 Mathieu Desnoyers 提交于 
      Fix a memory leak on an OOM condition in prepare_usermodehelper_creds().
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>
      570b8fb5
    • J
      ring-buffer: Add missing unlock · 292f60c0
      由 Julia Lawall 提交于 
      In some error handling cases the lock is not unlocked.  The return is
converted to a goto, to share the unlock at the end of the function.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression E1;
identifier f;
@@

f (...) { <+...
* spin_lock_irq (E1,...);
... when != E1
* return ...;
...+> }
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
LKML-Reference: <Pine.LNX.4.64.1003291736440.21896@ask.diku.dk>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      292f60c0
    • L
      tracing: Fix lockdep warning in global_clock() · e36673ec
      由 Li Zefan 提交于 
      # echo 1 > events/enable
 # echo global > trace_clock

------------[ cut here ]------------
WARNING: at kernel/lockdep.c:3162 check_flags+0xb2/0x190()
...
---[ end trace 3f86734a89416623 ]---
possible reason: unannotated irqs-on.
...

There's no reason to use the raw_local_irq_save() in trace_clock_global.
The local_irq_save() version is fine, and does not cause the bug in lockdep.
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BA97FA1.7030606@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      e36673ec
    • I
      x86: Do not free zero sized per cpu areas · eed63519
      由 Ian Campbell 提交于 
      This avoids an infinite loop in free_early_partial().

Add a warning to free_early_partial() to catch future problems.

-v5: put back start > end back into WARN_ONCE()
-v6: use one line for warning, suggested by Linus
-v7: more tests
-v8: remove the function name as suggested by Johannes
     WARN_ONCE() will print out that function name.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: NJoel Becker <joel.becker@oracle.com>
Tested-by: NStanislaw Gruszka <sgruszka@redhat.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1269830604-26214-4-git-send-email-yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      eed63519
    • D
      SLOW_WORK: CONFIG_SLOW_WORK_PROC should be CONFIG_SLOW_WORK_DEBUG · a53f4f9e
      由 David Howells 提交于 
      CONFIG_SLOW_WORK_PROC was changed to CONFIG_SLOW_WORK_DEBUG, but not in all
instances.  Change the remaining instances.  This makes the debugfs file
display the time mark and the owner's description again.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a53f4f9e
    • D
      slow-work: use get_ref wrapper instead of directly calling get_ref · 88be12c4
      由 Dave Airlie 提交于 
      Otherwise we can get an oops if the user has no get_ref/put_ref
requirement.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      88be12c4
  21. 29 3月, 2010 2 次提交
  23. 27 3月, 2010 2 次提交
    • M
      Freezer: Fix buggy resume test for tasks frozen with cgroup freezer · 5a7aadfe
      由 Matt Helsley 提交于 
      When the cgroup freezer is used to freeze tasks we do not want to thaw
those tasks during resume. Currently we test the cgroup freezer
state of the resuming tasks to see if the cgroup is FROZEN.  If so
then we don't thaw the task. However, the FREEZING state also indicates
that the task should remain frozen.

This also avoids a problem pointed out by Oren Ladaan: the freezer state
transition from FREEZING to FROZEN is updated lazily when userspace reads
or writes the freezer.state file in the cgroup filesystem. This means that
resume will thaw tasks in cgroups which should be in the FROZEN state if
there is no read/write of the freezer.state file to trigger this
transition before suspend.

NOTE: Another "simple" solution would be to always update the cgroup
freezer state during resume. However it's a bad choice for several reasons:
Updating the cgroup freezer state is somewhat expensive because it requires
walking all the tasks in the cgroup and checking if they are each frozen.
Worse, this could easily make resume run in N^2 time where N is the number
of tasks in the cgroup. Finally, updating the freezer state from this code
path requires trickier locking because of the way locks must be ordered.

Instead of updating the freezer state we rely on the fact that lazy
updates only manage the transition from FREEZING to FROZEN. We know that
a cgroup with the FREEZING state may actually be FROZEN so test for that
state too. This makes sense in the resume path even for partially-frozen
cgroups -- those that really are FREEZING but not FROZEN.
Reported-by: NOren Ladaan <orenl@cs.columbia.edu>
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Cc: stable@kernel.org
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
      5a7aadfe
    • X
      Freezer: Only show the state of tasks refusing to freeze · 4f598458
      由 Xiaotian Feng 提交于 
      show_state will dump all tasks state, so if freezer failed to freeze
any task, kernel will dump all tasks state and flood the dmesg log.
This patch makes freezer only show state of tasks refusing to freeze.
Signed-off-by: NXiaotian Feng <dfeng@redhat.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
      4f598458
  25. 25 3月, 2010 3 次提交
  27. 24 3月, 2010 2 次提交