Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 21 7月, 2016 26 次提交
  3. 20 7月, 2016 14 次提交
    • D
      Merge branch 'xdp' · 22b35488
      由 David S. Miller 提交于 
      Brenden Blanco says:

====================
Add driver bpf hook for early packet drop and forwarding

This patch set introduces new infrastructure for programmatically
processing packets in the earliest stages of rx, as part of an effort
others are calling eXpress Data Path (XDP) [1]. Start this effort by
introducing a new bpf program type for early packet filtering, before
even an skb has been allocated.

Extend on this with the ability to modify packet data and send back out
on the same port.

Patch 1 adds an API for bulk bpf prog refcnt incrememnt.
Patch 2 introduces the new prog type and helpers for validating the bpf
  program. A new userspace struct is defined containing only data and
  data_end as fields, with others to follow in the future.
In patch 3, create a new ndo to pass the fd to supported drivers.
In patch 4, expose a new rtnl option to userspace.
In patch 5, enable support in mlx4 driver.
In patch 6, create a sample drop and count program. With single core,
  achieved ~20 Mpps drop rate on a 40G ConnectX3-Pro. This includes
  packet data access, bpf array lookup, and increment.
In patch 7, add a page recycle facility to mlx4 rx, enabled when xdp is
  active.
In patch 8, add the XDP_TX type to bpf.h
In patch 9, add helper in tx patch for writing tx_desc
In patch 10, add support in mlx4 for packet data write and forwarding
In patch 11, turn on packet write support in the bpf verifier
In patch 12, add a sample program for packet write and forwarding. With
  single core, achieved ~10 Mpps rewrite and forwarding.

[1] https://github.com/iovisor/bpf-docs/blob/master/Express_Data_Path.pdf

v10:
 1/12: Add bulk refcnt api.
 5/12: Move prog from priv to ring. This attribute is still only set
   globally, but the path to finer granularity should be clear. No lock
   is taken, so some rings may operate on older programs for a time (one
   napi loop). Looked into options such as napi_synchronize, but they
   were deemed too slow (calls to msleep).
   Rename prog to xdp_prog. Add xdp_ring_num to help with accounting,
   used more heavily in later patches.
 7/12: Adjust to use per-ring xdp prog. Use priv->xdp_ring_num where
   before priv->prog was used to determine buffer allocations.
 9/12: Add cpu_to_be16 to vlan_tag in mxl4_en_xmit(). Remove unused variable
   from mlx4_en_xmit and unused params from build_inline_wqe.

v9:
 4/11: Add missing newline in en_err message.
 6/11: Move page_cache cleanup from mlx4_en_destroy_rx_ring to
   mlx4_en_deactivate_rx_ring. Move mlx4_en_moderation_update back to
   static. Remove calls to mlx4_en_alloc/free_resources in mlx4_xdp_set.
   Adopt instead the approach of mlx4_en_change_mtu to use a watchdog.
 9/11: Use a per-ring function pointer in tx to separate out the code
   for regular and recycle paths of tx completion handling. Add a helper
   function to init the recycle ring and callback, called just after
   activating tx. Remove extra tx ring resource requirement, and instead
   steal from the upper rings. This helps to avoid needing
   mlx4_en_alloc_resources. Add some hopefully meaningful error
   messages for the various error cases. Reverted some of the
   hard-to-follow logic that was accounting for the extra tx rings.

v8:
 1/11: Reduce WARN_ONCE to single line. Also, change act param of that
   function to u32 to match return type of bpf_prog_run_xdp.
 2/11: Clarify locking semantics in ndo comment.
 4/11: Add en_err warning in mlx4_xdp_set on num_frags/mtu violation.

v7:
 Addressing two of the major discussion points: return codes and ndo.
 The rest will be taken as todo items for separate patches.

 Add an XDP_ABORTED type, which explicitly falls through to DROP. The
 same result must be taken for the default case as well, as it is now
 well-defined API behavior.

 Merge ndo_xdp_* into a single ndo. The style is similar to
 ndo_setup_tc, but with less unidirectional naming convention. The IFLA
 parameter names are unchanged.

 TODOs:
 Add ethtool per-ring stats for aborted, default cases, maybe even drop
 and tx as well.
 Avoid duplicate dma sync operation in XDP_PASS case as mentioned by
 Saeed.

  1/12: Add XDP_ABORTED enum, reword API comment, and update commit
   message.
  2/12: Rewrite ndo_xdp_*() into single ndo_xdp() with type/union style
    calling convention.
  3/12: Switch to ndo_xdp callback.
  4/12: Add XDP_ABORTED case as a fall-through to XDP_DROP. Implement
    ndo_xdp.
 12/12: Dropped, this will need some more work.

v6:
  2/12: drop unnecessary netif_device_present check
  4/12, 6/12, 9/12: Reorder default case statement above drop case to
    remove some copy/paste.

v5:
  0/12: Rebase and remove previous 1/13 patch
  1/12: Fix nits from Daniel. Left the (void *) cast as-is, to be fixed
    in future. Add bpf_warn_invalid_xdp_action() helper, to be used when
    out of bounds action is returned by the program. Add a comment to
    bpf.h denoting the undefined nature of out of bounds returns.
  2/12: Switch to using bpf_prog_get_type(). Rename ndo_xdp_get() to
    ndo_xdp_attached().
  3/12: Add IFLA_XDP as a nested type, and add the associated nla_policy
    for the new subtypes IFLA_XDP_FD and IFLA_XDP_ATTACHED.
  4/12: Fixup the use of READ_ONCE in the ndos. Add a user of
    bpf_warn_invalid_xdp_action helper.
  5/12: Adjust to using the nested netlink options.
  6/12: kbuild was complaining about overflow of u16 on tile
    architecture...bump frag_stride to u32. The page_offset member that
    is computed from this was already u32.

v4:
  2/12: Add inline helper for calling xdp bpf prog under rcu
  3/12: Add detail to ndo comments
  5/12: Remove mlx4_call_xdp and use inline helper instead.
  6/12: Fix checkpatch complaints
  9/12: Introduce new patch 9/12 with common helper for tx_desc write
    Refactor to use common tx_desc write helper
 11/12: Fix checkpatch complaints

v3:
  Rewrite from v2 trying to incorporate feedback from multiple sources.
  Specifically, add ability to forward packets out the same port and
    allow packet modification.
  For packet forwarding, the driver reserves a dedicated set of tx rings
    for exclusive use by xdp. Upon completion, the pages on this ring are
    recycled directly back to a small per-rx-ring page cache without
    being dma unmapped.
  Use of the percpu skb is dropped in favor of a lightweight struct
    xdp_buff. The direct packet access feature is leveraged to remove
    dependence on the skb.
  The mlx4 driver implementation allocates a page-per-packet and maps it
    in PCI_DMA_BIDIRECTIONAL mode when the bpf program is activated.
  Naming is converted to use "xdp" instead of "phys_dev".

v2:
  1/5: Drop xdp from types, instead consistently use bpf_phys_dev_
    Introduce enum for return values from phys_dev hook
  2/5: Move prog->type check to just before invoking ndo
    Change ndo to take a bpf_prog * instead of fd
    Add ndo_bpf_get rather than keeping a bool in the netdev struct
  3/5: Use ndo_bpf_get to fetch bool
  4/5: Enforce that only 1 frag is ever given to bpf prog by disallowing
    mtu to increase beyond FRAG_SZ0 when bpf prog is running, or conversely
    to set a bpf prog when priv->num_frags > 1
    Rename pseudo_skb to bpf_phys_dev_md
    Implement ndo_bpf_get
    Add dma sync just before invoking prog
    Check for explicit bpf return code rather than nonzero
    Remove increment of rx_dropped
  5/5: Use explicit bpf return code in example
    Update commit log with higher pps numbers
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      22b35488
    • B
      bpf: add sample for xdp forwarding and rewrite · 764cbcce
      由 Brenden Blanco 提交于 
      Add a sample that rewrites and forwards packets out on the same
interface. Observed single core forwarding performance of ~10Mpps.

Since the mlx4 driver under test recycles every single packet page, the
perf output shows almost exclusively just the ring management and bpf
program work. Slowdowns are likely occurring due to cache misses.
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      764cbcce
    • B
      bpf: enable direct packet data write for xdp progs · 4acf6c0b
      由 Brenden Blanco 提交于 
      For forwarding to be effective, XDP programs should be allowed to
rewrite packet data.

This requires that the drivers supporting XDP must all map the packet
memory as TODEVICE or BIDIRECTIONAL before invoking the program.
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4acf6c0b
    • B
      net/mlx4_en: add xdp forwarding and data write support · 9ecc2d86
      由 Brenden Blanco 提交于 
      A user will now be able to loop packets back out of the same port using
a bpf program attached to xdp hook. Updates to the packet contents from
the bpf program is also supported.

For the packet write feature to work, the rx buffers are now mapped as
bidirectional when the page is allocated. This occurs only when the xdp
hook is active.

When the program returns a TX action, enqueue the packet directly to a
dedicated tx ring, so as to avoid completely any locking. This requires
the tx ring to be allocated 1:1 for each rx ring, as well as the tx
completion running in the same softirq.

Upon tx completion, this dedicated tx ring recycles pages without
unmapping directly back to the original rx ring. In steady state tx/drop
workload, effectively 0 page allocs/frees will occur.

In order to separate out the paths between free and recycle, a
free_tx_desc func pointer is introduced that is optionally updated
whenever recycle_ring is activated. By default the original free
function is always initialized.
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9ecc2d86
    • B
      net/mlx4_en: break out tx_desc write into separate function · 224e92e0
      由 Brenden Blanco 提交于 
      In preparation for writing the tx descriptor from multiple functions,
create a helper for both normal and blueflame access.
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      224e92e0
    • B
      bpf: add XDP_TX xdp_action for direct forwarding · 6ce96ca3
      由 Brenden Blanco 提交于 
      XDP enabled drivers must transmit received packets back out on the same
port they were received on when a program returns this action.
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6ce96ca3
    • B
      net/mlx4_en: add page recycle to prepare rx ring for tx support · d576acf0
      由 Brenden Blanco 提交于 
      The mlx4 driver by default allocates order-3 pages for the ring to
consume in multiple fragments. When the device has an xdp program, this
behavior will prevent tx actions since the page must be re-mapped in
TODEVICE mode, which cannot be done if the page is still shared.

Start by making the allocator configurable based on whether xdp is
running, such that order-0 pages are always used and never shared.

Since this will stress the page allocator, add a simple page cache to
each rx ring. Pages in the cache are left dma-mapped, and in drop-only
stress tests the page allocator is eliminated from the perf report.

Note that setting an xdp program will now require the rings to be
reconfigured.

Before:
 26.91%  ksoftirqd/0  [mlx4_en]         [k] mlx4_en_process_rx_cq
 17.88%  ksoftirqd/0  [mlx4_en]         [k] mlx4_en_alloc_frags
  6.00%  ksoftirqd/0  [mlx4_en]         [k] mlx4_en_free_frag
  4.49%  ksoftirqd/0  [kernel.vmlinux]  [k] get_page_from_freelist
  3.21%  swapper      [kernel.vmlinux]  [k] intel_idle
  2.73%  ksoftirqd/0  [kernel.vmlinux]  [k] bpf_map_lookup_elem
  2.57%  swapper      [mlx4_en]         [k] mlx4_en_process_rx_cq

After:
 31.72%  swapper      [kernel.vmlinux]       [k] intel_idle
  8.79%  swapper      [mlx4_en]              [k] mlx4_en_process_rx_cq
  7.54%  swapper      [kernel.vmlinux]       [k] poll_idle
  6.36%  swapper      [mlx4_core]            [k] mlx4_eq_int
  4.21%  swapper      [kernel.vmlinux]       [k] tasklet_action
  4.03%  swapper      [kernel.vmlinux]       [k] cpuidle_enter_state
  3.43%  swapper      [mlx4_en]              [k] mlx4_en_prepare_rx_desc
  2.18%  swapper      [kernel.vmlinux]       [k] native_irq_return_iret
  1.37%  swapper      [kernel.vmlinux]       [k] menu_select
  1.09%  swapper      [kernel.vmlinux]       [k] bpf_map_lookup_elem
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d576acf0
    • B
      Add sample for adding simple drop program to link · 86af8b41
      由 Brenden Blanco 提交于 
      Add a sample program that only drops packets at the BPF_PROG_TYPE_XDP_RX
hook of a link. With the drop-only program, observed single core rate is
~20Mpps.

Other tests were run, for instance without the dropcnt increment or
without reading from the packet header, the packet rate was mostly
unchanged.

$ perf record -a samples/bpf/xdp1 $(</sys/class/net/eth0/ifindex)
proto 17:   20403027 drops/s

./pktgen_sample03_burst_single_flow.sh -i $DEV -d $IP -m $MAC -t 4
Running... ctrl^C to stop
Device: eth4@0
Result: OK: 11791017(c11788327+d2689) usec, 59622913 (60byte,0frags)
  5056638pps 2427Mb/sec (2427186240bps) errors: 0
Device: eth4@1
Result: OK: 11791012(c11787906+d3106) usec, 60526944 (60byte,0frags)
  5133311pps 2463Mb/sec (2463989280bps) errors: 0
Device: eth4@2
Result: OK: 11791019(c11788249+d2769) usec, 59868091 (60byte,0frags)
  5077431pps 2437Mb/sec (2437166880bps) errors: 0
Device: eth4@3
Result: OK: 11795039(c11792403+d2636) usec, 59483181 (60byte,0frags)
  5043067pps 2420Mb/sec (2420672160bps) errors: 0

perf report --no-children:
 26.05%  ksoftirqd/0  [mlx4_en]         [k] mlx4_en_process_rx_cq
 17.84%  ksoftirqd/0  [mlx4_en]         [k] mlx4_en_alloc_frags
  5.52%  ksoftirqd/0  [mlx4_en]         [k] mlx4_en_free_frag
  4.90%  swapper      [kernel.vmlinux]  [k] poll_idle
  4.14%  ksoftirqd/0  [kernel.vmlinux]  [k] get_page_from_freelist
  2.78%  ksoftirqd/0  [kernel.vmlinux]  [k] __free_pages_ok
  2.57%  ksoftirqd/0  [kernel.vmlinux]  [k] bpf_map_lookup_elem
  2.51%  swapper      [mlx4_en]         [k] mlx4_en_process_rx_cq
  1.94%  ksoftirqd/0  [kernel.vmlinux]  [k] percpu_array_map_lookup_elem
  1.45%  swapper      [mlx4_en]         [k] mlx4_en_alloc_frags
  1.35%  ksoftirqd/0  [kernel.vmlinux]  [k] free_one_page
  1.33%  swapper      [kernel.vmlinux]  [k] intel_idle
  1.04%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c5c5
  0.96%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c58d
  0.93%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c6ee
  0.92%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c6b9
  0.89%  ksoftirqd/0  [kernel.vmlinux]  [k] __alloc_pages_nodemask
  0.83%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c686
  0.83%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c5d5
  0.78%  ksoftirqd/0  [mlx4_en]         [k] mlx4_alloc_pages.isra.23
  0.77%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c5b4
  0.77%  ksoftirqd/0  [kernel.vmlinux]  [k] net_rx_action

machine specs:
 receiver - Intel E5-1630 v3 @ 3.70GHz
 sender - Intel E5645 @ 2.40GHz
 Mellanox ConnectX-3 @40G
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      86af8b41
    • B
      net/mlx4_en: add support for fast rx drop bpf program · 47a38e15
      由 Brenden Blanco 提交于 
      Add support for the BPF_PROG_TYPE_XDP hook in mlx4 driver.

In tc/socket bpf programs, helpers linearize skb fragments as needed
when the program touches the packet data. However, in the pursuit of
speed, XDP programs will not be allowed to use these slower functions,
especially if it involves allocating an skb.

Therefore, disallow MTU settings that would produce a multi-fragment
packet that XDP programs would fail to access. Future enhancements could
be done to increase the allowable MTU.

The xdp program is present as a per-ring data structure, but as of yet
it is not possible to set at that granularity through any ndo.
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      47a38e15
    • B
      rtnl: add option for setting link xdp prog · d1fdd913
      由 Brenden Blanco 提交于 
      Sets the bpf program represented by fd as an early filter in the rx path
of the netdev. The fd must have been created as BPF_PROG_TYPE_XDP.
Providing a negative value as fd clears the program. Getting the fd back
via rtnl is not possible, therefore reading of this value merely
provides a bool whether the program is valid on the link or not.
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d1fdd913
    • B
      net: add ndo to setup/query xdp prog in adapter rx · a7862b45
      由 Brenden Blanco 提交于 
      Add one new netdev op for drivers implementing the BPF_PROG_TYPE_XDP
filter. The single op is used for both setup/query of the xdp program,
modelled after ndo_setup_tc.
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a7862b45
    • B
      bpf: add XDP prog type for early driver filter · 6a773a15
      由 Brenden Blanco 提交于 
      Add a new bpf prog type that is intended to run in early stages of the
packet rx path. Only minimal packet metadata will be available, hence a
new context type, struct xdp_md, is exposed to userspace. So far only
expose the packet start and end pointers, and only in read mode.

An XDP program must return one of the well known enum values, all other
return codes are reserved for future use. Unfortunately, this
restriction is hard to enforce at verification time, so take the
approach of warning at runtime when such programs are encountered. Out
of bounds return codes should alias to XDP_ABORTED.
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6a773a15
    • B
      bpf: add bpf_prog_add api for bulk prog refcnt · 59d3656d
      由 Brenden Blanco 提交于 
      A subsystem may need to store many copies of a bpf program, each
deserving its own reference. Rather than requiring the caller to loop
one by one (with possible mid-loop failure), add a bulk bpf_prog_add
api.
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      59d3656d
    • D
      Merge branch 'ncsi' · ddbcb794
      由 David S. Miller 提交于 
      Gavin Shan says:

====================
NCSI Support

This series rebases on David's linux-net git repo ("master" branch). It's
to support NCSI stack on drivers/net/ethernet/faraday/ftgmac100.c. The
implementation is based on NCSI spec (version: 1.1.0):
https://www.dmtf.org/sites/default/files/standards/documents/DSP0222_1.1.0.pdf

As the following figure shows and defined in NCSI spec:

 * The NC-SI (aka NCSI) is defined as the interface between a (Base)
   Management Controller (BMC) and one or multiple Network Interface
   Controlers (NIC) on host side. The interface is responsible for providing
   external network connectivity for BMC.
 * Each BMC can connect to multiple packages, up to 8. Each package can have
   multiple channels, up to 32. Every package and channel are identified by
   3-bits and 5-bits in NCSI packet.
 * NCSI packet, encapsulated in ethernet frame, has 0x88F8 in the protocol
   field. The destination MAC address should be 0xFF's while the source MAC
   address can be arbitrary one.
 * NCSI packets are classified to command, response, AEN (Asynchronous Event Notification).
   Commands are sent from BMC to host (NIC) for configuration and
   information retrival. Responses, corresponding to commands, are sent from
   host to BMC for confirmation and requested information. One command should
   have one and only one response. AEN is sent from host to BMC for notification
   (e.g. link down on active channel) so that BMC can take appropriate action.

   +------------------+        +----------------------------------------------+
   |                  |        |                     Host                     |
   |        BMC       |        |                                              |
   |                  |        | +-------------------+  +-------------------+ |
   |    +---------+   |        | |     Package-A     |  |     Package-B     | |
   |    |         |   |        | +---------+---------+  +-------------------+ |
   |    |ftgmac100|   |        | | Channel | Channel |  | Channel | Channel | |
   +----+----+----+---+        +-+---------+---------+--+---------+---------+-+
             |                             |                      |
             |                             |                      |
             +-----------------------------+----------------------+

The series of patches is highlighted as:

The design for the patchset is highlighted as below:

 * The network driver uses 3 interfaces exported from NCSI stack:
   ncsi_register_dev() - Register (create) a associated NCSI device.
   ncsi_start_dev() - Bring up the NCSI device.
   ncsi_unregister_dev() - Destroy the registered NCSI device.
 * There are several data structures introduced for different objects:
   struct ncsi_dev - NCSI device seen by network device driver.
   struct ncsi_dev_priv - NCSI device seen by NCSI stack.
   struct ncsi_package - NCSI package which can have multiple channels.
   struct ncsi_channel - NCSI channel.
 * The NCSI stack is driven by workqueue and state machine internally.
 * The all available NCSI packages and channels are enumerated (probed) on
   the first call to ncsi_start_dev(). The NCSI topology won't change until
   the NCSI device is destroyed.
 * All available channels will be brought up When the hardware arbitration
   is enabled. Otherwise, only one channel is selected as active one. The
   NCSI internal is driven by state machine with help of a workqueue. In
   the meanwhile, there are 3 states for each channel which can be put into
   a queue requesting for configuration or suspending. Channels in the queue
   with inactive state set will be configured (bringup) while channels in
   the queue with active state will be suspended (teardown). The request
   configuration or suspending is being applied on the channel if it's in
   invisible state.
 * Failover, another inactive channel is selected as active, can happen when
   the hardware arbitration is disabled. The failover can be caused by timeout
   on link monitor and AEN.
 * NCSI stack should be configurable through netlink or another mechanism, it's
   not implemented in this patchset. It's something TBD.
 * The first NIC driver that is aware of NCSI: drivers/net/ethernet/faraday/ftgmac100.c

Changelog
=========
v2 -> v3:
 * Include (one line) change in include/uapi/linux/if_ether.h to fix build
   error.
v1 -> v2:
 * Support NCSI spec v1.1.0 (3 more commands and 4 hardware arbitration
   modes added).
 * Enable AEN packets according to the supported list.
 * Introduce NCSI channel states and processing queue in order to support
   the hardware arbitration.
 * The hardware arbitration is supported (tested with emulated environment).
 * Introduce link monitor with GLS (Get Link Status) command/response as part
   of the error handling defined in NCSI spec.
 * Support IPv6 address discovery when CONFIG_IPV6 is enabled.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ddbcb794