Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 20 4月, 2006 1 次提交
  3. 27 3月, 2006 1 次提交
  5. 12 3月, 2006 5 次提交
  7. 03 3月, 2006 1 次提交
  9. 08 2月, 2006 2 次提交
  11. 05 2月, 2006 3 次提交
  13. 26 1月, 2006 2 次提交
  15. 15 1月, 2006 1 次提交
  17. 14 12月, 2005 3 次提交
  19. 29 10月, 2005 6 次提交
    • J
      [SCSI] update fc_transport for removal of block/unblock functions · 19a7b4ae
      由 James.Smart@Emulex.Com 提交于 
      We recently went back to implement a board reset. When we perform the
reset, we wanted to tear down the internal data structures and rebuild
them. Unfortunately, when it came to the rport structure, things were
odd. If we deleted them, the scsi targets and sdevs would be
torn down. Not a good thing for a temporary reset. We could block the
rports, but we either maintain the internal structures to keep the
rport reference (perhaps even replicating what's in the transport),
or we have to fatten the fc transport with new search routines to find
the rport (and deal with a case of a dangling rport that the driver
forgets).

It dawned on me that we had actually reached this state incorrectly.
When the fc transport first started, we did the block/unblock first, then
added the rport interface. The purpose of block/unblock is to hide the
temporary disappearance of the rport (e.g. being deleted, then readded).
Why are we making the driver do the block/unblock ? We should be making
the transport have only an rport add/delete, and the let the transport
handle the block/unblock.

So... This patch removes the existing fc_remote_port_block/unblock
functions. It moves the block/unblock functionality into the
fc_remote_port_add/delete functions.  Updates for the lpfc driver are
included. Qlogic driver updates are also enclosed, thanks to the
contributions of Andrew Vasquez. [Note: the qla2xxx changes are
relative to the scsi-misc-2.6 tree as of this morning - which does
not include the recent patches sent by Andrew]. The zfcp driver does
not use the block/unblock functions.

One last comment: The resulting behavior feels very clean. The LLDD is
concerned only with add/delete, which corresponds to the physical
disappearance.  However, the fact that the scsi target and sdevs are
not immediately torn down after the LLDD calls delete causes an
interesting scenario... the midlayer can call the xxx_slave_alloc and
xxx_queuecommand functions with a sdev that is at the location the
rport used to be. The driver must validate the device exists when it
first enters these functions. In thinking about it, this has always
been the case for the LLDD and these routines. The existing drivers
already check for existence. However, this highlights that simple
validation via data structure dereferencing needs to be watched.
To deal with this, a new transport function, fc_remote_port_chkready()
was created that LLDDs should call when they first enter these two
routines. It validates the rport state, and returns a scsi result
which could be returned. In addition to solving the above, it also
creates consistent behavior from the LLDD's when the block and deletes
are occuring.

Rejections fixed up and
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
      19a7b4ae
    • A
      [SCSI] Add an 'Issue LIP' device attribute in fc_transport class · 91ca7b01
      由 Andrew Vasquez 提交于 
      Ok, here's a patch to add such a common API for fc transport users.
Relevant LLD changes (lpfc and qla2xxx) also present.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
      91ca7b01
    • J
      [SCSI] qla2xxx: put back label erroneously removed by eh_active patch · 28f22b03
      由 James Bottomley 提交于 
      The label eh_dev_reset_done is still in use
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
      28f22b03
    • A
      [SCSI] qla2xxx: remove eh_active checks in qla2xxx error handling · 9a41a62b
      由 Andrew Vasquez 提交于 
      Here's a patch which drops the eh_active checks in the qla2xxx
eh_handler callbacks.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
      9a41a62b
    • A
      [SCSI] qla2xxx: Update license. · fa90c54f
      由 Andrew Vasquez 提交于 
      Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
      fa90c54f
    • A
      [SCSI] qla2xxx: Add support to dynamically enable/disable ZIO. · 4fdfefe5
      由 Andrew Vasquez 提交于 
      ISP23xx and ISP24xx chips have support for an adaptive
method of posting SCSI command completions for multiple SCSI
commands during a single system interrupt.

SCSI commands are placed on the system response queue
without interrupting the host until 1) a delay timer
expires; or 2) a SCSI command completes with an error.

As long as the host software (qla2xxx) services the response
queue for completions (this polling is done during
queuecommand()) within the 'delay timer' period, the
firmware will not generate system interrupt.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
      4fdfefe5
  21. 26 10月, 2005 1 次提交
    • A
      [PATCH] qlogic lockup fix · 444d1d9b
      由 Andrew Morton 提交于 
      If qla2x00_probe_one()'s call to qla2x00_iospace_config() fails, we call
qla2x00_free_device() to clean up.  But because ha->dpc_pid hasn't been set
yet, qla2x00_free_device() tries to stop a kernel thread which hasn't started
yet.  It does wait_for_completion() against an uninitialised completion struct
and the kernel hangs up.

Fix it by initialising ha->dpc_pid a bit earlier.

Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      444d1d9b
  23. 05 9月, 2005 8 次提交
  25. 14 7月, 2005 6 次提交